☆ 4.8 Review

Hygroscopic Porous Polymer for Sorption-Based Atmospheric Water Harvesting

ADVANCED SCIENCE (2022)

Related references

Note: Only part of the references are listed.

Article Nanoscience & Nanotechnology

Enhanced Atmospheric Water Harvesting with Sunlight-Activated Sorption Ratcheting

Hyunchul Park et al.

Summary: This study proposes a sustainable atmospheric water harvesting strategy using durable hydrogel sorbents, which operate based on a "ratcheting" mechanism activated by direct sunlight. The strategy improves the daily water productivity and demonstrates great potential to advance the water harvesting capabilities of related systems.

ACS APPLIED MATERIALS & INTERFACES (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Polyzwitterionic Hydrogels for Efficient Atmospheric Water Harvesting

Chuxin Lei et al.

Summary: Atmospheric water harvesting is a promising strategy for providing sustainable freshwater to landlocked and arid regions. Polyquaternary ammonium salt hydrogels have been developed as an effective material platform for AWH, with superior performance and the ability to produce significant amounts of freshwater.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2022)

Add to Collection

Article Thermodynamics

Modeling and optimization of a honeycombed adsorbent bed for efficient moisture capture

Wenwen Wang et al.

Summary: This study developed a specially designed and optimized adsorbent bed with a transient three-dimensional non-equilibrium model, which was used to investigate the influence of adsorbent bed structure and operating parameters on moisture capture efficiency. The simulation results agreed well with experimental results, indicating the reliability of the model. The chosen working pair, ASLi30-vapor, exhibited favorable characteristics for moisture capture, vapor transport resistance, and adsorption kinetics.

APPLIED THERMAL ENGINEERING (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Experimental and Theoretical Assessment of Water Sorbent Kinetics

Ulrich Legrand et al.

Summary: Study finds that open porosity has the greatest influence on improving sorbent kinetics. Converting sorbent kinetics data into daily water capture yields shows that there is an optimal open porosity for each sorbent, and thinner layers with moderate open porosity outperform thicker layers with high open porosity, indicating that high maximum water uptake and fast single-particle kinetics are not necessarily predictive of high daily water yield.

LANGMUIR (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Kinetics of Sorption in Hygroscopic Hydrogels

Carlos D. Diaz-Marin et al.

Summary: A generic framework of sorption kinetics for hygroscopic hydrogels has been developed, with liquid transport due to chemical potential gradient playing a key role in fast kinetics. The high water uptake is attributed to the hydrogel's expansion during liquid transport. Key design parameters governing the kinetics include initial porosity, hydrogel thickness, and shear modulus.

NANO LETTERS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Reversible Hydration Composite Films for Evaporative Perspiration Control and Heat Stress Management

Jiachen Yang et al.

Summary: The use of personal protective equipment (PPE) in the healthcare sector has been intensified during the COVID-19 pandemic. However, conventional PPE limits moisture permeability and sweat evaporation, leading to increased heat stress on personnel. This study developed a zinc-poly(vinyl alcohol) (Zn-PVA) composite film that reduces relative humidity inside the protective suit and enhances evaporative cooling, thereby reducing the likelihood of heat stroke.

SMALL (2022)

Add to Collection

Article Chemistry, Physical

Sorption-tree with scalable hygroscopic adsorbent-leaves for water harvesting

Fangfang Deng et al.

Summary: Sorption-based atmospheric water harvesting (SAWH) is a promising method for overcoming water scarcity in arid areas. Researchers have developed a three-dimensional sorption-tree to improve sorption capacity and increase solar utilization efficiency. In experiments, the sorption-tree achieved remarkable water productivity, which can meet daily water demand.

JOURNAL OF MATERIALS CHEMISTRY A (2022)

Add to Collection

Article Multidisciplinary Sciences

Condensation of water vapor from humid air inside vertical channels formed by flat plates

Primoz Poredos et al.

Summary: Condensation of humid air is an important process in thermal and process engineering. It plays a significant role in scientific domains such as atmospheric water harvesting and seawater desalination. This study presents a simple and computationally efficient correlation for forced flow condensation from humid air inside vertical channels formed by flat plates. The correlation has been experimentally validated and shows excellent agreement.

ISCIENCE (2022)

Add to Collection

Article Chemistry, Multidisciplinary

An Asymmetric Hygroscopic Structure for Moisture-Driven Hygro-Ionic Electricity Generation and Storage

Yaoxin Zhang et al.

Summary: This paper reports an asymmetric hygroscopic structure (AHS) that achieves energy harvesting and storage from moisture absorption. The AHS exploits wet-dry asymmetry generated by water absorption to produce an in-plane electric field. The capacitive properties of AHS are attributed to the development of an electrical double layer (EDL) over the carbon surface through a hygro-ionic process. The AHS can be recharged either by self-regeneration or external electrical means, showing potential for electronics powering in assembled devices.

ADVANCED MATERIALS (2022)

Add to Collection

Article Engineering, Environmental

Viability of a practical multicyclic sorption-based water harvester with improved water yield

Wenwen Wang et al.

Summary: Sorption-based atmospheric water harvesting (SAWH) is an attractive method to address water scarcity, but current devices have low daily water yield. A new air-cooled SAWH device demonstrated high water productivity and feasibility for multicyclic operation, showing promise for large-scale water supply in island areas and new applications like indoor dehumidification.

WATER RESEARCH (2022)

Add to Collection

Article Multidisciplinary Sciences

Scalable super hygroscopic polymer films for sustainable moisture harvesting in arid environments

Youhong Guo et al.

Summary: By synthesizing a hygroscopic polymer film composed of renewable biomass, high water uptake at low relative humidity can be achieved, enabling the extraction of atmospheric water and addressing the global water crisis.

NATURE COMMUNICATIONS (2022)

Add to Collection

Editorial Material Green & Sustainable Science & Technology

Best practices for solar water production technologies

Yaoxin Zhang et al.

Summary: Consensus is needed to accurately evaluate the performance and potential of emerging water production technologies, and this article provides recommendations on how to achieve a fair basis for comparison and align research input with actual demand.

NATURE SUSTAINABILITY (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Tailoring the Desorption Behavior of Hygroscopic Gels for Atmospheric Water Harvesting in Arid Climates

Hengyi Lu et al.

Summary: Atmospheric water harvesting (AWH) technology, which extracts moisture from the air to generate clean water, is a promising strategy. This study proposes a LiCl-incorporating polyacrylamide hydrogel (PAM-LiCl) for effective water harvesting in arid environments, with high water uptake and fast sorption kinetics.

ADVANCED MATERIALS (2022)

Add to Collection

Article Engineering, Environmental

Sorption-based atmospheric water harvesting: Filling the gap between material and system

Fangfang Deng et al.

RESOURCES CONSERVATION AND RECYCLING (2022)

Add to Collection

Article Multidisciplinary Sciences

Exceptional water production yield enabled by batch-processed portable water harvester in semi-arid climate

He Shan et al.

Summary: This study reports a portable and modular water harvester that uses a low-cost and lightweight LiCl-based hygroscopic composite as the sorbent, capable of achieving large-scale and reliable water production in semi-arid climates.

NATURE COMMUNICATIONS (2022)

Add to Collection

Review Multidisciplinary Sciences

Functional hydrogel coatings

Junjie Liu et al.

Summary: Hydrogels are polymer networks that swell in water and can be made compatible with living tissues, providing advantages such as lubricity, biocompatibility, and anti-biofouling properties. Research has focused on applications, methods of coating different substrates with tough adhesion, and testing the adhesion between functional hydrogel coatings and substrates.

NATIONAL SCIENCE REVIEW (2021)

Add to Collection

Article Chemistry, Physical

Dual-Stage Atmospheric Water Harvesting Device for Scalable Solar-Driven Water Production

Alina LaPotin et al.

Summary: Recent research has shown that a dual-stage AWH device with optimized design can achieve higher daily water productivity by recovering the latent heat of condensation and maintaining the required temperature difference between stages, without the need for additional heating units. Outdoor experiments demonstrated the effectiveness of the dual-stage water harvesting device.

JOULE (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Superelastic, Hygroscopic, and Ionic Conducting Cellulose Nanofibril Monoliths by 3D Printing

Yuan Chen et al.

Summary: A compressible and superelastic 3D-printed cellulose nanofibril monolith with high performance in elasticity, compressibility, and pressure sensitivity was achieved through hierarchical architecture design and the addition of hygroscopic salt. This design strategy is expected to expand to materials beyond cellulose and have broader applications in flexible sensors, thermal insulation, and other fields.

ACS NANO (2021)

Add to Collection

Article Multidisciplinary Sciences

Global potential for harvesting drinking water from air using solar energy

Jackson Lord et al.

Summary: The potential of atmospheric water harvesting using solar energy to provide safely managed drinking water for a billion people globally is significant, especially in tropical regions. Research indicates that with continuous technological development and the introduction of new sorbent materials, these targets could be achieved.

NATURE (2021)

Add to Collection

Article Chemistry, Physical

Solar-powered nanostructured biopolymer hygroscopic aerogels for atmospheric water harvesting

Mengzhu Wang et al.

Summary: The study introduces a novel strategy of utilizing solar energy to power a nanostructured biopolymer aerogel for atmospheric water harvesting, which shows high moisture absorption capacity and low energy consumption. This biopolymer can absorb water even at low relative humidity and easily collect liquid water under natural sunlight.

NANO ENERGY (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Machine-Learning-Assisted Autonomous Humidity Management System Based on Solar-Regenerated Super Hygroscopic Complex

Xueping Zhang et al.

Summary: Utilizing a low-energy and highly efficient humidity control system can effectively reduce thermal discomfort and health issues while also alleviating water scarcity.

ADVANCED SCIENCE (2021)

Add to Collection

Article Chemistry, Multidisciplinary

High-Yield and Low-Cost Solar Water Purification via Hydrogel-Based Membrane Distillation

Hengyi Lu et al.

Summary: Solar water purification using a hydrogel-based ultrathin membrane shows promise for achieving high water yield at a low cost. By eliminating temperature polarization-induced energy consumption, the technology significantly improves vapor collection ratio and offers a sustainable solution for decentralized water purification and large-scale water treatment.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Bioinspired topological design of super hygroscopic complex for cost-effective atmospheric water harvesting

Fangfang Deng et al.

Summary: The study developed a promising adsorbent based on natural materials, showing high performance and low cost in atmospheric water harvesting technology. The adsorbent efficiently adsorbs and desorbs water, and has the potential to harvest water resources at a low cost.

NANO ENERGY (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Polymeric Hydrogels-A Promising Platform in Enhancing Water Security for a Sustainable Future

Siew-Leng Loo et al.

Summary: Polymeric hydrogels have shown promise in enhancing global water security sustainably. Their unique properties give them a competitive advantage in water treatment, meeting the multifaceted requirements of different water technologies.

ADVANCED MATERIALS INTERFACES (2021)

Add to Collection

Review Engineering, Environmental

A Roadmap to Sorption-Based Atmospheric Water Harvesting: From Molecular Sorption Mechanism to Sorbent Design and System Optimization

Kaijie Yang et al.

Summary: This review summarizes the latest progress in sorption-based atmospheric water harvesting (SAWH) technology, focusing on sorbent material design and system optimization. The article introduces water sorption mechanisms on different sorbent materials, discusses the properties and performances of various sorbents, and analyzes the influences of mass and heat transport on system performance.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2021)

Add to Collection

Review Chemistry, Physical

Adsorption-based atmospheric water harvesting

M. Ejeian et al.

Summary: Atmospheric water harvesting (AWH) and adsorption-based atmospheric water harvesting (ABAWH) are promising solutions to the world's water shortage, with ABAWH showing higher water supply ability in arid areas. Many modern adsorbents have been introduced for this application, but there are still challenges to address for widespread and practical use of this technology.

JOULE (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Solar-Powered Sustainable Water Production: State-of-the-Art Technologies for SunlightEnergy-Water Nexus

Zhengtong Li et al.

Summary: This article provides a comprehensive overview of solar-powered technologies for alternative water utilization, including STID, STMD, SED, and ST-AWH. It discusses strategies for improving the evaporation rate of STID systems, as well as the fundamental principles and research hotspots of STMD and SED technologies. Additionally, it covers technology design, materials evolution, and device assembly of ST-AWH and other solar-powered technologies.

ACS NANO (2021)

Add to Collection

Article Engineering, Chemical

Non-Isothermal Kinetic Model of Water Vapor Adsorption on a Desiccant Bed for Harvesting Water from Atmospheric Air

Robin Peeters et al.

Summary: This paper developed a non-isothermal kinetic model to study the production of fresh water from atmospheric water vapor using desiccant pellets in a day-night cycle. The study found that factors like bed thickness and water vapor diffusion have impacts on the absorption efficiency.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2021)

Add to Collection

Article Engineering, Chemical

Nanoporous Sponges as Carbon-Based Sorbents for Atmospheric Water Generation

Ulrich Legrand et al.

Summary: The synthesis of new nanoporous sponge NPS with oxygen and nitrogen functionalities shows high adsorption capacity and stability in multiple cycles. Experimental results demonstrate good agreement between small- and larger-scale water adsorption properties of NPS.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2021)

Add to Collection

Article Thermodynamics

Thermal resistance-capacitance network model for fast simulation on the desiccant coated devices used for effective electronic cooling

H. R. Liu et al.

Summary: This paper proposes a strategy to develop dynamic compact thermal models for analyzing the heat and mass transfer processes in sorption-based systems. The proposed model can accurately forecast the transient thermal behavior of devices and provide insights for system design and optimization.

INTERNATIONAL JOURNAL OF REFRIGERATION (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Carbon Materials for Solar Water Evaporation and Desalination

Weixin Guan et al.

Summary: Carbon-based materials play a crucial role in solar-assisted seawater desalination, offering high solar absorption and cost-effectiveness for interfacial solar vapor generation. This review summarizes the recent research progress on carbon-based materials in this field, highlighting their design principles and strategies for designing antisalt-fouling desalination systems. Challenges and opportunities for carbon-based materials in solar evaporation technology are also discussed.

SMALL (2021)

Add to Collection

Article Chemistry, Multidisciplinary

High-yield solar-driven atmospheric water harvesting with ultra-high salt content composites encapsulated in porous membrane

He Shan et al.

Summary: A composite sorbent with high salt content and polytetrafluoroethylene membrane encapsulation method was developed, showing high sorption capacity without leakage. The experiment results demonstrate that the sorbent has high absorption capacity at different humidities, which could support future middle- or large-scale applications.

CELL REPORTS PHYSICAL SCIENCE (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Enhanced adsorption-based atmospheric water harvesting using a photothermal cotton rod for freshwater production in cold climates

Wenchang Zhang et al.

Summary: The ABAWH technology uses solar energy to drive water adsorbents to extract water from the air, and achieve evaporation and collection through photothermal materials. By integrating composite ionic liquids and carbon nanotubes, water harvesting has been successfully achieved in a 6 degrees Celsius environment.

RSC ADVANCES (2021)

Add to Collection

Article Chemistry, Physical

Moisture-indicating cellulose aerogels for multiple atmospheric water harvesting cycles driven by solar energy

Jiaming Sun et al.

Summary: A moisture-indicating hygroscopic aerogel has been designed for solar driven sorption-based atmospheric water harvesting, showing a visually real-time indication of sorption process while harvesting moisture. By integrating various materials, it achieves a flexible response to changes in environmental humidity and solar radiation, providing a promising method for sustainable water delivery.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Ultrahigh solar-driven atmospheric water production enabled by scalable rapid-cycling water harvester with vertically aligned nanocomposite sorbent

Jiaxing Xu et al.

Summary: Freshwater scarcity is a significant global challenge, and sorption-based atmospheric water harvesting provides a solution, but faces issues of weak sorbent capability and low water productivity.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Add to Collection

Article Chemistry, Physical

Light-responsive bilayered hydrogel for freshwater production from surface soil moisture

Mengmeng Zhang et al.

Summary: The study introduces a method using light-responsive hydrogel to produce freshwater from surface soil moisture, showing significantly improved water absorption capacity even in sandy soil with low water content.

ECOMAT (2021)

Add to Collection

Review Materials Science, Multidisciplinary

Solar Water Evaporation Toward Water Purification and Beyond

Xingyi Zhou et al.

Summary: This paper summarizes the recent progress and potential applications of solar water evaporation (SWE) system, emphasizing the high-performance design principles and challenges, and highlighting the future development directions of this technology.

ACS MATERIALS LETTERS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Metal- and halide-free, solid-state polymeric water vapor sorbents for efficient water-sorption-driven cooling and atmospheric water harvesting

Mengchun Wu et al.

Summary: The study introduces a novel type of highly efficient and benign polymeric sorbent that is metal- and halide-free, with an expandable solid state when wet, showing reduced corrosivity and improved water sorption capacity. The acetate paired hydrogel exhibits exceptional water sorption capacity among hygroscopic polymers, even though crosslinked, and is utilized in water-sorption-driven cooling and atmospheric water harvesting applications, resulting in improved COP and high freshwater production rate. This work inspires further research in developing advanced water sorbents and expanding the application of water-sorption-based processes in the water-energy nexus.

MATERIALS HORIZONS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Embedding metal foam into metal-organic framework monoliths for triggering a highly efficient release of adsorbed atmospheric water by localized eddy current heating

Yingle Tao et al.

Summary: Utilizing metal foam (MF) embedded MOF monoliths (MF@MOFs) can overcome the thermal insulating nature of MOF monoliths and realize rapid and uniform heating through the use of localized eddy current heating (LECH), leading to significantly improved desorption kinetics for water harvesting from the atmosphere.

MATERIALS HORIZONS (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Printed aerogels: chemistry, processing, and applications

Junzong Feng et al.

Summary: Aerogels, as a lightweight and porous nanomaterial, have attracted interest in both academia and industry. However, their modest mechanical durability poses challenges, which bottom-up additive manufacturing technology has the potential to address. This technology has led to the emergence of a new interdisciplinary research area combining aerogel and printing technology, pushing the boundaries of structure and performance while broadening their application scope.

CHEMICAL SOCIETY REVIEWS (2021)

Add to Collection

Review Chemistry, Inorganic & Nuclear

Porous frameworks for effective water adsorption: from 3D bulk to 2D nanosheets

Lan Zhang et al.

Summary: This review summarizes the latest progress in the development of porous frameworks for water harvesting, discussing systems engineering for hygroscopic salts, fabrication of nano-porous super-hygroscopic hydrogels, and design strategies for various porous adsorbents. The future challenges and directions in this emerging field are also discussed.

INORGANIC CHEMISTRY FRONTIERS (2021)

Add to Collection

Article Thermodynamics

PROSPECT OF AEROGELS AS DESICCANT MATERIALS: POSSIBILITIES AND CHALLENGES

Nilofar Asim et al.

Summary: Aerogels, with highly porous nanostructures containing 90%-99% air, are considered attractive for various applications. The potential use of agricultural and industrial wastes for aerogel preparation adds to their appeal. Despite their high potential as desiccants, research on aerogels in this context is limited.

JOURNAL OF POROUS MEDIA (2021)

Add to Collection

Article Chemistry, Physical

Improving atmospheric water production yield: Enabling multiple water harvesting cycles with nano sorbent

Renyuan Li et al.

NANO ENERGY (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Highly Efficient Clean Water Production from Contaminated Air with a Wide Humidity Range

Houze Yao et al.

ADVANCED MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Efficient Solar-Driven Water Harvesting from Arid Air with Metal-Organic Frameworks Modified by Hygroscopic Salt

Jiaxing Xu et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Thermo-Responsive MOF/Polymer Composites for Temperature-Mediated Water Capture and Release

Avishek Karmakar et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Water and Metal-Organic Frameworks: From Interaction toward Utilization

Xinlei Liu et al.

CHEMICAL REVIEWS (2020)

Add to Collection

Review Nanoscience & Nanotechnology

Materials for solar-powered water evaporation

Fei Zhao et al.

NATURE REVIEWS MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

A Moisture-Hungry Copper Complex Harvesting Air Moisture for Potable Water and Autonomous Urban Agriculture

Jiachen Yang et al.

ADVANCED MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Tillandsia-Inspired Hygroscopic Photothermal Organogels for Efficient Atmospheric Water Harvesting

Feng Ni et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Hydrogels and Hydrogel-Derived Materials for Energy and Water Sustainability

Youhong Guo et al.

CHEMICAL REVIEWS (2020)

Add to Collection

Article Multidisciplinary Sciences

Tip-induced flipping of droplets on Janus pillars: From local reconfiguration to global transport

Shile Feng et al.

SCIENCE ADVANCES (2020)

Add to Collection

Article Green & Sustainable Science & Technology

Photovoltaic panel cooling by atmospheric water sorption-evaporation cycle

Renyuan Li et al.

NATURE SUSTAINABILITY (2020)

Add to Collection

Article Green & Sustainable Science & Technology

A sunlight-responsive metal-organic framework system for sustainable water desalination

Ranwen Ou et al.

NATURE SUSTAINABILITY (2020)

Add to Collection

Article Chemistry, Applied

Adsorption isotherm and kinetics of water vapors on novel superporous hydrogel composites

Hemant Mittal et al.

MICROPOROUS AND MESOPOROUS MATERIALS (2020)

Add to Collection

Article Energy & Fuels

Simple preparation of external-shape and internal-channel size adjustable porous hydrogels by fermentation for efficient solar interfacial evaporation

Xuechen Liang et al.

SOLAR ENERGY (2020)

Add to Collection

Article Chemistry, Physical

Plasmonic wooden flower for highly efficient solar vapor generation

Si Chen et al.

NANO ENERGY (2020)

Add to Collection

Article Multidisciplinary Sciences

Autonomous atmospheric water seeping MOF matrix

G. Yilmaz et al.

SCIENCE ADVANCES (2020)

Add to Collection

Article Multidisciplinary Sciences

Capillary condensation under atomic-scale confinement

Qian Yang et al.

NATURE (2020)

Add to Collection

Article Chemistry, Physical

Simultaneous generation of atmospheric water and electricity using a hygroscopic aerogel with fast sorption kinetics

Kaijie Yang et al.

NANO ENERGY (2020)

Add to Collection

Editorial Material Chemistry, Physical

Digestion of Ambient Humidity for Energy Generation

Yaoxin Zhang et al.

JOULE (2020)

Add to Collection

Article Chemistry, Physical

An all-day solar-driven vapor generator via photothermal and Joule-heating effects

Yang Guo et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Super Moisture Absorbent Gels for Sustainable Agriculture via Atmospheric Water Irrigation

Xingyi Zhou et al.

ACS MATERIALS LETTERS (2020)

Add to Collection

Article Chemistry, Physical

Energy Harvesting from Atmospheric Humidity by a Hydrogel-Integrated Ferroelectric-Semiconductor System

Lin Yang et al.

JOULE (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Super Atmospheric Water Harvesting Hydrogel with Alginate Chains Modified with Binary Salts

Akram Entezari et al.

ACS MATERIALS LETTERS (2020)

Add to Collection

Article Chemistry, Physical

Over 10 kg m-2 h-1 Evaporation Rate Enabled by a 3D Interconnected Porous Carbon Foam

Jinlei Li et al.

JOULE (2020)

Add to Collection

Article Chemistry, Physical

Hollow spherical SiO2 micro-container encapsulation of LiCl for high-performance simultaneous heat reallocation and seawater desalination

Kaijie Yang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Langmuir's Theory of Adsorption: A Centennial Review

Hans Swenson et al.

LANGMUIR (2019)

Add to Collection

Review Chemistry, Multidisciplinary

Adsorption-Based Atmospheric Water Harvesting: Impact of Material and Component Properties on System-Level Performance

Alina LaPotin et al.

ACCOUNTS OF CHEMICAL RESEARCH (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Superelastic Graphene Nanocomposite for High Cycle-Stability Water Capture-Release under Sunlight

Bo Chen et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Synergistic Energy Nanoconfinement and Water Activation in Hydrogels for Efficient Solar Water Desalination

Youhong Guo et al.

ACS NANO (2019)

Add to Collection

Review Chemistry, Multidisciplinary

Harnessing Solar-Driven Photothermal Effect toward the Water-Energy Nexus

Chao Zhang et al.

ADVANCED SCIENCE (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Recyclable Polydopamine-Functionalized Sponge for High-Efficiency Clean Water Generation with Dual-Purpose Solar Evaporation and Contaminant Adsorption

Yue Zhang et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection

Review Engineering, Chemical

Biomass and Industrial Wastes as Resource Materials for Aerogel Preparation: Opportunities, Challenges, and Research Directions

Nilofar Asim et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Photochemically Induced Water Harvesting in Metal-Organic Framework

Bong Lim Suh et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Rapid Cycling and Exceptional Yield in a Metal-Organic Framework Water Harvester

Nikita Hanikel et al.

ACS CENTRAL SCIENCE (2019)

Add to Collection

Review Chemistry, Multidisciplinary

Hydrogels as an Emerging Material Platform for Solar Water Purification

Xingyi Zhou et al.

ACCOUNTS OF CHEMICAL RESEARCH (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Solar Energy Triggered Clean Water Harvesting from Humid Air Existing above Sea Surface Enabled by a Hydrogel with Ultrahigh Hygroscopicity

Dilip Krishna Nandakumar et al.

ADVANCED MATERIALS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Super Moisture-Absorbent Gels for All-Weather Atmospheric Water Harvesting

Fei Zhao et al.

ADVANCED MATERIALS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Switchable Wettability of Thermoresponsive Core-Shell Nanofibers for Water Capture and Release

Soyoung Kim et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2019)

Add to Collection

Article Engineering, Environmental

Harvesting Water from Air: Using Anhydrous Salt with Sunlight

Renyuan Li et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2018)

Add to Collection

Article Multidisciplinary Sciences

Adsorption-based atmospheric water harvesting device for arid climates

Hyunho Kim et al.

NATURE COMMUNICATIONS (2018)

Add to Collection

Article Multidisciplinary Sciences

Thermo-responsive gels that absorb moisture and ooze water

Kazuya Matsumoto et al.

NATURE COMMUNICATIONS (2018)

Add to Collection

Article Multidisciplinary Sciences

Hydrophilic directional slippery rough surfaces for water harvesting

Xianming Dai et al.

SCIENCE ADVANCES (2018)

Add to Collection

Article Engineering, Environmental

Hybrid Hydrogel with High Water Vapor Harvesting Capacity for Deployable Solar-Driven Atmospheric Water Generator

Renyuan Li et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2018)

Add to Collection

Article Multidisciplinary Sciences

Emerging trends in global freshwater availability

M. Rodell et al.

NATURE (2018)

Add to Collection

Article Energy & Fuels

A robust large-pore zirconium carboxylate metal-organic framework for energy-efficient water-sorption-driven refrigeration

Sujing Wang et al.

NATURE ENERGY (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Water harvesting from air with a hygroscopic salt in a hydrogel-derived matrix

Paul A. Kallenberger et al.

COMMUNICATIONS CHEMISTRY (2018)

Add to Collection

Review Chemistry, Physical

Progress and Expectation of Atmospheric Water Harvesting

Yaodong Tu et al.

JOULE (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Imbibition Triggered by Capillary Condensation in Nanopores

Olivier Vincent et al.

LANGMUIR (2017)

Add to Collection

Article Multidisciplinary Sciences

Water harvesting from air with metal-organic frameworks powered by natural sunlight

Hyunho Kim et al.

SCIENCE (2017)

Add to Collection

Article Chemistry, Physical

Carbon nanoparticles of Chinese ink-wrapped natural loofah sponge: a low-cost three-dimensional electrode for high-performance microbial energy harvesting

Lihua Zhou et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

Add to Collection

Article Energy & Fuels

Steam generation under one sun enabled by a floating structure with thermal concentration

George Ni et al.

NATURE ENERGY (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Physisorption of gases, with special reference to the evaluation of surface area and pore size distribution (IUPAC Technical Report)

Matthias Thommes et al.

PURE AND APPLIED CHEMISTRY (2015)

Add to Collection

Article Chemistry, Physical

S/O-Functionalities on Modified Carbon Materials Governing Adsorption of Water Vapor

Jing Xiao et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2013)

Add to Collection

Article Chemistry, Physical

Water Adsorption-Desorption Behavior of Two-Dimensional Hexagonal Mesoporous Silica around Freezing Point

Kyohei Yamashita et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2013)

Add to Collection

Article Nanoscience & Nanotechnology

Dynamic Moisture Sorption Characteristics of Xerogels from Water-Swellable Oligo(oxyethylene) Lignin Derivatives

Lars Passauer et al.

ACS APPLIED MATERIALS & INTERFACES (2012)

Add to Collection

Review Multidisciplinary Sciences

The Future of Seawater Desalination: Energy, Technology, and the Environment

Menachem Elimelech et al.

SCIENCE (2011)

Add to Collection

Review Chemistry, Physical

Water adsorption and the wetting of metal surfaces

A. Hodgson et al.

SURFACE SCIENCE REPORTS (2009)

Add to Collection

Article Chemistry, Analytical

Pore size optimisation of humidity sensor - a probabilistic approach

G Banerjee et al.

SENSORS AND ACTUATORS B-CHEMICAL (2002)

Add to Collection

© Peeref 2019-2024. All rights reserved.