☆ 4.7 Review

MXene-Based Porous Monoliths

NANOMATERIALS (2022)

Related references

Note: Only part of the references are listed.

Article Engineering, Environmental

Wearable and high-performance piezoresistive sensor based on nanofiber/sodium alginate synergistically enhanced MXene composite aerogel

Zhen Qin et al.

Summary: This paper reports a lightweight cellulose acetate nanofiber/sodium alginate-enhanced MXene composite aerogel with excellent mechanical performance and high compressive strength. The sensor fabricated using a liquid nitrogen-assisted unidirectional-freezing strategy exhibits ultra-high sensitivity and stable output, with the ability to withstand multiple compression cycles within a wide pressure range.

CHEMICAL ENGINEERING JOURNAL (2023)

Add to Collection

Article Chemistry, Multidisciplinary

3D Printed Template-Assisted Assembly of Additive-Free Ti3C2Tx MXene Microlattices with Customized Structures toward High Areal Capacitance

Chuang Yang et al.

Summary: A 3D printed template-assisted method is used to fabricate additive-free 3D architected MXene aerogels with controllable structures and high performance. The MXene ink with a wide range of concentrations allows for the production of MXene aerogels with high structural freedom and fine feature size.

ACS NANO (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Tailoring the Microstructure of Lamellar Ti3C2Tx MXene Aerogel by Compressive Straining

Shelley D. Rawson et al.

Summary: Aerogels are attracting attention due to their lightweight and high porosity, and this study has developed a method to quantitatively analyze the microstructural evolution of lamellar aerogels. The study shows that the sheets rotate towards a flat orientation and narrow in spacing during compression, except for sheets close to the loading direction. These findings provide insights for optimizing the freeze-casting process.

ACS NANO (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Integrated Water and Thermal Managements in Bioinspired Hierarchical MXene Aerogels for Highly Efficient Solar-Powered Water Evaporation

Hongming Zhang et al.

Summary: This study reports an integrated design of solar absorbers for efficient water desalination. The design combines spectrally modified Ti3C2Tx nanosheets with polyvinyl alcohol to create a composite aerogel with a feather-like microstructure, providing excellent thermal insulation. The functional features of the material enable high energy efficiency and evaporation rate, making it suitable for solar-powered water desalination.

ADVANCED FUNCTIONAL MATERIALS (2022)

Add to Collection

Review Chemistry, Multidisciplinary

MXenes for Energy Harvesting

Yizhou Wang et al.

Summary: This article presents a perspective on using MXenes for energy harvesting from various sources in the environment. It systematically introduces the characteristics of MXenes for energy capturing and summarizes the preparation strategies of MXenes and their derived nanostructures tailored toward such applications. The harvesting mechanism of different energy sources is discussed, and recent progress in MXene-based nanostructures for energy harvesting is introduced. The existing challenges and future directions of MXene-based nanostructure for energy harvesting are also presented.

ADVANCED MATERIALS (2022)

Add to Collection

Review Chemistry, Multidisciplinary

Dimensional Design and Core-Shell Engineering of Nanomaterials for Electromagnetic Wave Absorption

Zhengchen Wu et al.

Summary: Electromagnetic wave absorption materials with core-shell structures can enhance performance through interfacial polarization, conduction networks, magnetic coupling, and magnetic-dielectric synergy. This review outlines the recent advances in low-dimensional core-shell electromagnetic wave absorption materials and discusses notable examples. Key information regarding dimensional design, structural engineering, performance, and structure-function relationship is comprehensively summarized.

ADVANCED MATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

3D Printed MXene Aerogels with Truly 3D Macrostructure and Highly Engineered Microstructure for Enhanced Electrical and Electrochemical Performance

Halil Tetik et al.

Summary: Combining unidirectional freeze casting with inkjet-based 3D printing, macroscopic porous aerogels with vertically aligned Ti3C2Tx sheets were fabricated, demonstrating excellent electromechanical performance and electrical conductivity. By adding an inkjet-printed MXene current collector layer with horizontally aligned MXene sheets and vertical MXene sheets as electrodes, the electrochemical performance of the cells showed thickness-independent capacitive behavior.

ADVANCED MATERIALS (2022)

Add to Collection

Article Engineering, Environmental

Construction of 3D MXene/Silver nanowires aerogels reinforced polymer composites for extraordinary electromagnetic interference shielding and thermal conductivity

Houbao Liu et al.

Summary: Novel multifunctional materials with anti-electromagnetic interference (EMI) and effective thermal management are designed by combining one-dimensional silver nanowires (AgNWs) and two-dimensional MXene into three-dimensional aerogels for epoxy nanocomposites. The resulting MXene/AgNWs/Epoxy nanocomposites show high electrical conductivity and exceptional EMI shielding effectiveness, as well as improved thermal conductivity, making them suitable for applications in electronic devices.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Review Chemistry, Multidisciplinary

Recent Trends in Synthesis and Applications of Porous MXene Assemblies: A Topical Review

Zhenyu Chen et al.

Summary: MXene has high conductivity and hydrophilicity, but low surface area utilization. Assembling 2D MXene into 3D structures can effectively address this issue. Incorporating MXene with other nanomaterials during assembly process can tailor the properties of MXene assemblies to enhance their performance.

CHEMICAL RECORD (2022)

Add to Collection

Review Physics, Applied

Recent advances in 3D porous MXenes: structures, properties and applications

Qiuyang Yan et al.

Summary: In this review, recent studies on porous MXenes are discussed, including their synthesis, structure, properties, and applications. The possible correlation between structure and properties is elaborated through a comprehensive comparison of typical porous MXene examples. Finally, the challenges and perspectives for advancing the study and applications of porous MXenes are presented.

JOURNAL OF PHYSICS D-APPLIED PHYSICS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

MXene-Based Aerogel Anchored with Antimony Single Atoms and Quantum Dots for High-Performance Potassium-Ion Batteries

Xin Guo et al.

Summary: This study reports the use of Ti3C2Tx MXene-based aerogels modified with antimony single atoms for high-performance potassium-ion batteries. The atomically dispersed antimony can modify the electronic structure of the composite material, improve charge transfer kinetics, and enhance potassium storage capability. Additionally, the MXene-based aerogel with surface functional groups and defects provides excellent anchoring sites for antimony and improves structural stability and electron transfer efficiency. This research is of great importance for enhancing battery performance.

NANO LETTERS (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Room-Temperature Assembled MXene-Based Aerogels for High Mass-Loading Sodium-Ion Storage

Fei Song et al.

Summary: This study reports on the low-temperature assembly of MXene nanosheets into robust three-dimensional aerogels. By using suitable cross-linking agents, graphene oxide-assisted assembly of Ti3C2Tx MXene aerogel with high Ti3C2Tx content and robustness was achieved. Further modification allowed for the use of this aerogel as a freestanding anode for sodium-ion storage, demonstrating promising electrochemical performances.

NANO-MICRO LETTERS (2022)

Add to Collection

Article Chemistry, Physical

Ultralight, highly compressible, thermally stable MXene/aramid nanofiber anisotropic aerogels for electromagnetic interference shielding

Yiqian Du et al.

Summary: Researchers are focusing on improving the applicability of transition-metal carbon/nitride (MXene) shielding devices through integration with nanomaterials and polymers. By constructing an ultralight, conductive aerogel with strong interfacial interaction between MXene nanosheets and aramid nanofibers, the device shows excellent compressibility, superelasticity, and electromagnetic interference (EMI) shielding performance. Additionally, the aerogel has consistent thermal stability and flame retardant properties, making it suitable for various extreme conditions.

JOURNAL OF MATERIALS CHEMISTRY A (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Design of Vertically Aligned Two-Dimensional Heterostructures of Rigid Ti3C2TX MXene and Pliable Vanadium Pentoxide for Efficient Lithium Ion Storage

Henghan Dai et al.

Summary: This study successfully constructed a self-supported thick electrode using an ice crystallization-induced strategy, which utilizes vertically aligned two-dimensional heterostructures (V-MXene/V2O5) to enhance electron/ion transport speed within the electrode and provides mechanical stability with the MXene scaffold. The optimized electrodes showed promising performance and cycling stability.

ACS NANO (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Highly Sensitive Temperature-Pressure Bimodal Aerogel with Stimulus Discriminability for Human Physiological Monitoring

Jinhua Wu et al.

Summary: This article introduces a multimodal sensor with high sensitivity, accurate sensing resolution, and stimuli discriminability. The sensor is fabricated using MXene and semicrystalline polymer to assemble shrinkable nanochannel structures, enabling distinguishable temperature and pressure sensing. Experimental results demonstrate that the sensor exhibits high accuracy and sensitivity within the human physiological temperature range.

NANO LETTERS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Xylem-Inspired Polyimide/MXene Aerogels with Radial Lamellar Architectures for Highly Sensitive Strain Detection and Efficient Solar Steam Generation

Lei Pu et al.

Summary: A radially architectured polyimide/MXene composite aerogel with reversible compressibility, developed by combining the interfacial enhancing strategy and radial ice-templating method, exhibits excellent mechanical strength, electrical conductivity, and water transporting capability, making it suitable for accurate human motion monitoring and efficient photothermal evaporation.

NANO LETTERS (2022)

Add to Collection

Article Multidisciplinary Sciences

Pushing detectability and sensitivity for subtle force to new limits with shrinkable nanochannel structured aerogel

Xinlei Shi et al.

Summary: This study proposes a strategy for fabricating a soft polysiloxane crosslinked MXene aerogel with multilevel nanochannels, which exhibits an ultralow Young's modulus, numerous variable conductive pathways, and mechanical robustness. The aerogel can detect extremely subtle pressure signals, deliver a high pressure sensitivity, and exhibit extraordinary sensing robustness. These properties enable the aerogel to be used for monitoring internal jugular venous pulses, detecting mosquito impacts, and mapping static pressure.

NATURE COMMUNICATIONS (2022)

Add to Collection

Article Chemistry, Physical

Vertically Aligned MXene Nanosheet Arrays for High-Rate Lithium Metal Anodes

Qian Chen et al.

Summary: In this study, vertically aligned Ti3C2Tx MXene nanosheet arrays were used to regulate Li metal nucleation and deposition, resulting in high Coulombic efficiencies and stability.

ADVANCED ENERGY MATERIALS (2022)

Add to Collection

Review Chemistry, Multidisciplinary

MXene chemistry, electrochemistry and energy storage applications

Xinliang Li et al.

Summary: The diverse and tunable surface and bulk chemistry of MXenes have valuable and distinctive properties that can be utilized in various components of energy storage devices such as electrodes, electrolytes, and separators. They enhance stability and performance through ion storage, transfer regulation, steric hindrance, and electrocatalytic functions.

NATURE REVIEWS CHEMISTRY (2022)

Add to Collection

Article Chemistry, Multidisciplinary

3D-Printed Sodiophilic V2CTx/rGO-CNT MXene Microgrid Aerogel for Stable Na Metal Anode with High Areal Capacity

Zixuan Wang et al.

Summary: In this study, an artificial three-dimensional hierarchical porous sodiophilic V2CTx/rGO-CNT microgrid aerogel electrode was fabricated by direct-ink writing 3D printing technology for sodium metal anode, effectively solving the sodium dendrite problem. The electrode exhibits superior cycling life and Coulombic efficiency, and can operate at high capacity and stability. Furthermore, this work offers an approach for fabricating advanced Na metal anodes via 3D printing.

ACS NANO (2022)

Add to Collection

Article Chemistry, Physical

Oxidation stability enhanced MXene-based porous materials derived from water-in-ionic liquid Pickering emulsions for wearable piezoresistive sensor and oil/water separation applications

Qi Fan et al.

Summary: By constructing water-in-ionic liquid Pickering emulsion, oxidation stability enhanced porous materials based on Ti3C2-MXene have been fabricated, which can be used for wearable piezoresistive sensors.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2022)

Add to Collection

Review Chemistry, Multidisciplinary

A Review on MXene Synthesis, Stability, and Photocatalytic Applications

G. Murali et al.

Summary: Photocatalytic water splitting, CO2 reduction, and pollutant degradation are promising strategies for addressing environmental and energy crises. The use of expensive noble-metal cocatalysts is necessary to enhance photocatalytic performance, but the development of efficient, inexpensive, and noble-metal-free cocatalysts is desirable. MXenes have shown great potential as alternatives to noble-metal cocatalysts, with their 2D morphology, metallic electrical conductivity, hydrophilic surface, and high specific surface area. This review focuses on the synthesis, stability, and application of MXenes-based photocatalysts for H2 evolution, CO2 reduction, and pollutant degradation, and discusses the challenges and future directions for enhancing their photocatalytic performance.

ACS NANO (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Biomimetic Porous MXene Sediment-Based Hydrogel for High-Performance and Multifunctional Electromagnetic Interference Shielding

Yunfei Yang et al.

Summary: This study develops a high-performance biomimetic hydrogel through a simple method. By integrating ordered porous structure, highly conductive material, and water, the hydrogel exhibits excellent electromagnetic interference shielding effectiveness. The addition of silver nanowires further enhances the shielding performance. The hydrogel also demonstrates the capability for human motion detection and smart coding.

ACS NANO (2022)

Add to Collection

Review Chemistry, Multidisciplinary

Recent Trends in Synthesis and Applications of Porous MXene Assemblies: A Topical Review

Zhenyu Chen et al.

Summary: Assembling MXene with other nanomaterials into 3D structures can enhance performance and enable a wide range of applications in energy, sensing, electromagnetic interference shielding, water purification, and photocatalysis.

CHEMICAL RECORD (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Assessment of Occlusal Force and Local Gas Release Using Degradable Bacterial Cellulose/Ti3C2Tx MXene Bioaerogel for Oral Healthcare

Xiujuan Jin et al.

Summary: The newly developed bacterial cellulose/Ti3C2Tx MXene bioaerogel combines mechanical properties and functional groups for detecting occlusal force and early diagnosis of periodontal diseases, showing promise for oral health and disease diagnosis.

ACS NANO (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Lightweight, Superelastic, and Hydrophobic Polyimide Nanofiber /MXene Composite Aerogel for Wearable Piezoresistive Sensor and Oil/Water Separation Applications

Hu Liu et al.

Summary: The article describes a conductive polyimide nanofiber/MXene composite aerogel with features such as ultralow density, temperature tolerance, superior compressibility, and fatigue resistance, suitable for applications in piezoresistive sensors and oil/water separation.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Energy & Fuels

Paraffin/Ti3C2Tx Mxene@Gelatin Aerogels Composite Phase-Change Materials with High Solar-Thermal Conversion Efficiency and Enhanced Thermal Conductivity for Thermal Energy Storage

Xianjie Liu et al.

Summary: The novel paraffin/Ti3C2Tx@gelatin (PA/T@G) composite phase-change materials show high load rates and large melting enthalpies, with improved thermal conductivity and solar-thermal conversion efficiency, making them a promising material for solar-thermal energy storage applications.

ENERGY & FUELS (2021)

Add to Collection

Article Engineering, Environmental

Wood-inspired superelastic MXene aerogels with superior photothermal conversion and durable superhydrophobicity for clean-up of super-viscous crude oil

Chenyang Cai et al.

Summary: This study introduces a novel wood-inspired MXene aerogel material with excellent superhydrophobicity, mechanical superelasticity, and efficient photothermal conversion ability.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Engineering, Environmental

Superhydrophobic MXene@carboxylated carbon nanotubes/carboxymethyl chitosan aerogel for piezoresistive pressure sensor

Zhipeng Yang et al.

Summary: This study introduces a superhydrophobic MXene-coated C-CNTs/CCS aerogel for piezoresistive pressure sensors, exhibiting superior performance characteristics and wide application prospects.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Chemistry, Multidisciplinary

3D-Printed Zn-Ion Hybrid Capacitor Enabled by Universal Divalent Cation-Gelated Additive-Free Ti3C2 MXene Ink

Zhaodi Fan et al.

Summary: A high-capacitance and long-life ZIC is demonstrated by 3D printing Ti3C2 MXene cathode, with excellent areal capacitance and rate capability. The dual-ion storage mechanism of the 3D-printed MXene cathode synergizes pseudocapacitive behavior of H+ and electrical double-layer capacitive behavior of Zn2+, outperforming state-of-the-art ZICs in terms of energy/power density and lifespan.

ACS NANO (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Three-Dimensional MOFs@MXene Aerogel Composite Derived MXene Threaded Hollow Carbon Confined CoS Nanoparticles toward Advanced Alkali-Ion Batteries

Long Yao et al.

Summary: This study presents a novel aerogel structure of MOFs@MXene to prevent aggregation of MXene nanosheets and enhance conductivity, as well as a (CoS NP@NHC)@MXene composite with excellent electrochemistry properties for use in lithium-ion, sodium-ion, and potassium-ion batteries. The hybrid system shows outstanding cycle stability, high capacities, and enhanced charge transfer kinetics, suggesting potential for practical electrochemical energy storage devices.

ACS NANO (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Ti3C2TX MXene for Sensing Applications: Recent Progress, Design Principles, and Future Perspectives

Yangyang Pei et al.

Summary: With the rapid development of electronic and information technologies, sensors are becoming increasingly important in daily life, with MXene emerging as a promising 2D material with great potential in the field of sensors.

ACS NANO (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Superelastic Ti3C2Tx MXene-Based Hybrid Aerogels for Compression-Resilient Devices

Degang Jiang et al.

Summary: Superelastic MXene/reduced graphene oxide aerogels with excellent properties have been fabricated, showing potential applications in wearable electronics and piezoresistive sensors. The aerogel exhibits reversible compressive strain and high electrical conductivity, maintaining stable structural integrity.

ACS NANO (2021)

Add to Collection

Article Chemistry, Physical

Facile construction of 2D MXene (Ti3C2Tx) based aerogels with effective fire-resistance and electromagnetic interference shielding performance

Yan Zhang et al.

Summary: A facile method to fabricate cellulose nanofiber (CNF)/ammonium polyphosphate (APP)/Ti3C2Tx composite aerogels was demonstrated, showing excellent fire-resistance and high-performance EMI shielding effectiveness. The composite aerogel with high electrical conductivity and multiple reflections from the porous structure is a competitive product for high-performance EMI shielding material.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Superelastic, Ultralight, and Conductive Ti3C2Tx MXene/Acidified Carbon Nanotube Anisotropic Aerogels for Electromagnetic Interference Shielding

Zhiming Deng et al.

Summary: The study demonstrates a method to fabricate conductive lightweight aerogels with superelasticity and high thermal insulation by mimicking the plant Parthenocissus tricuspidata. These aerogels show high efficiency in EMI shielding applications and exhibit good thermal insulation performance. By controlling the composition ratio, the density and EMI shielding effectiveness of the aerogels can be adjusted accordingly.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Flexible, Ultralight, and Mechanically Robust Waterborne Polyurethane/Ti3C2Tx MXene/Nickel Ferrite Hybrid Aerogels for High-Performance Electromagnetic Interference Shielding

Yu Wang et al.

Summary: This study fabricates a novel waterborne polyurethane/MXene/nickel ferrite hybrid aerogel with remarkable lightweight and mechanical properties, as well as high-efficiency EMI shielding performance. The hybrid aerogels exhibit high X-band EMI shielding effectiveness of 64.7 dB and specific SE values ranging from 1694 to 3124 dB.cm(3)/g, making them promising for long-term and effective EMI shielding in various application environments.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Healable, Degradable, and Conductive MXene Nanocomposite Hydrogel for Multifunctional Epidermal Sensors

Xiaobin Li et al.

Summary: The proposed multifunctional epidermal sensor is based on highly stretchable, self-healing, degradable, and biocompatible nanocomposite hydrogel, which has a fast response time and sensitive detection capability for electrophysiological signals, as well as environmentally friendly degradation properties.

ACS NANO (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Multifunctional Magnetic Ti3C2Tx MXene/Graphene Aerogel with Superior Electromagnetic Wave Absorption Performance

Luyang Liang et al.

Summary: The study successfully developed a three-dimensional dielectric/magnetic aerogel with superior absorption performance, broad absorption bandwidth, and excellent electromagnetic wave absorbing capabilities, demonstrating potential for stable and durable electromagnetic applications.

ACS NANO (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Modified MAX Phase Synthesis for Environmentally Stable and Highly Conductive Ti3C2 MXene

Tyler S. Mathis et al.

Summary: By including excess aluminum during the synthesis of the Ti3AlC2 MAX phase precursor, improved Al-Ti3C2 nanosheets with enhanced crystallinity and carbon stoichiometry are produced, leading to higher resistance to oxidation and increased electronic conductivity. The shelf life of aqueous suspensions of stoichiometric single-to few-layer Al-Ti3C2 flakes made from the modified precursor is extended to over ten months, compared to 1 to 2 weeks for previously published Ti3C2. Additionally, the improved Al-Ti3C2 exhibits oxidation initiation at temperatures 100-150 degrees C higher than conventional Ti3C2, demonstrating potential for widespread use of this material.

ACS NANO (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Lamellar MXene Composite Aerogels with Sandwiched Carbon Nanotubes Enable Stable Lithium-Sulfur Batteries with a High Sulfur Loading

Bin Zhang et al.

Summary: In this study, a lamellar aerogel composed of Ti3C2Tx MXene/carbon nanotube sandwiches was prepared to improve the cycling stability of high sulfur loading batteries. The unique parallel-aligned structure of the material effectively suppresses lithium polysulfide shuttling and enhances the confinement ability of LiPS, resulting in high capacity and superior cycling stability.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Adjustable electrochemical properties of solid-solution MXenes

Likui Wang et al.

Summary: MXenes are promising pseudocapacitive materials with high specific capacitance. This study synthesized two sets of niobium-based solid-solution MXenes and investigated the relationship between their electrochemical properties and the ratio of transition metals in the structure, finding that higher niobium content can improve cycling stability. This research shows that the electrochemical properties of MXenes can be controlled by adjusting the ratio of transition metals in the MXene structure.

NANO ENERGY (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Recent Advances in 3D Printing of Structured Materials for Adsorption and Catalysis Applications

Shane Lawson et al.

Summary: Porous solids as adsorbents and catalysts are essential in industrial processes, and structuring them is crucial for scaling up. Additive manufacturing, such as 3D printing, is a valuable tool for shaping porous materials and fabricating scalable configurations, addressing issues with traditional setups.

CHEMICAL REVIEWS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

High-Entropy 2D Carbide MXenes: TiVNbMoC3 and TiVCrMoC3

Srinivasa Kartik Nemani et al.

Summary: A study reports the synthesis of multi-principal-element high-entropy M4C3Tx MXenes, including two new high-entropy MXenes and their precursor MAX phases. The research utilized various characterization techniques to determine the structure and distribution of four transition metals in high-entropy MAX and MXene phases, along with first-principles calculations for formation energies. Experimental results show that using three transition metals instead of four can lead to the formation of two different MAX phases under similar synthesis conditions, highlighting the significance of configurational entropy in stabilizing high-entropy MAX phases.

ACS NANO (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Solar-Powered Sustainable Water Production: State-of-the-Art Technologies for SunlightEnergy-Water Nexus

Zhengtong Li et al.

Summary: This article provides a comprehensive overview of solar-powered technologies for alternative water utilization, including STID, STMD, SED, and ST-AWH. It discusses strategies for improving the evaporation rate of STID systems, as well as the fundamental principles and research hotspots of STMD and SED technologies. Additionally, it covers technology design, materials evolution, and device assembly of ST-AWH and other solar-powered technologies.

ACS NANO (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Advances in the Synthesis of 2D MXenes

Yi Wei et al.

Summary: MXenes, versatile materials with adjustable structures and rich surface chemistry, have been recognized as potential 2D materials for various applications. Recent research has focused on synthetic routes, etching methods, and delamination strategies for large-scale preparation and stable storage. Antioxidation strategies for MXenes have also been summarized for future developments and practical applications.

ADVANCED MATERIALS (2021)

Add to Collection

Article Polymer Science

Poly(vinyl alcohol)/MXene biomimetic aerogels with tunable mechanical properties and electromagnetic interference shielding performance controlled by pore structure

Zhenyou Guo et al.

Summary: This study explores the influence of morphology parameters on the performance of bio-inspired aerogels with transition metal carbides. It was found that increasing the pore channel size/wall thickness can enhance the EMI shielding ability but decrease the compressible strength. This is attributed to the saturation of pores-induced multiple reflections and scattering, making wall thickness the decisive factor.

POLYMER (2021)

Add to Collection

Editorial Material Materials Science, Ceramics

A decade of discovery: A review of MXenes, the family of 2D transition metal carbides and nitrides

Yury Gogotsi

AMERICAN CERAMIC SOCIETY BULLETIN (2021)

Add to Collection

Article Chemistry, Analytical

Flexible MXene/rGO/CuO hybrid aerogels for high performance acetone sensing at room temperature

Miao Liu et al.

Summary: In this study, a high-performance room temperature gas-sensing material was successfully developed by utilizing MXene and reduced graphene oxide as building blocks. The resulting 3D aerogel shows excellent acetone-sensing performance at room temperature, with fast response and recovery times, as well as good reproducibility and selectivity. This strategy of composite 3D graphene/MXene architectures with metal oxide semiconductors provides a new pathway for future development of room temperature gas sensors.

SENSORS AND ACTUATORS B-CHEMICAL (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Carbon Materials for Solar Water Evaporation and Desalination

Weixin Guan et al.

Summary: Carbon-based materials play a crucial role in solar-assisted seawater desalination, offering high solar absorption and cost-effectiveness for interfacial solar vapor generation. This review summarizes the recent research progress on carbon-based materials in this field, highlighting their design principles and strategies for designing antisalt-fouling desalination systems. Challenges and opportunities for carbon-based materials in solar evaporation technology are also discussed.

SMALL (2021)

Add to Collection

Article Chemistry, Physical

Porous MXene monoliths with locally laminated structure for enhanced pseudo-capacitance and fast sodium-ion storage

Juan Zhao et al.

Summary: This study presents the fabrication of porous MXene monoliths with locally laminated structure through alkali-assisted self-assembly, which enhances the capacity and rate performance for sodium-ion storage. The balance of laminated and porous structures in MXene monoliths is crucial for providing sufficient storage sites and ion transport pathways simultaneously.

NANO ENERGY (2021)

Add to Collection

Article Chemistry, Multidisciplinary

A Multi-Scale Structural Engineering Strategy for High-Performance MXene Hydrogel Supercapacitor Electrode

Xianwu Huang et al.

Summary: A multi-scale structural engineering strategy is proposed to fabricate high-performance MXene hydrogel supercapacitor electrodes. The electrode has a three-dimensional open macrostructure and sufficient electrolyte and H+-intercalated microstructure, providing abundant active sites for ion storage.

ADVANCED SCIENCE (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Ultralight and Hyperelastic Nanofiber-Reinforced MXene-Graphene Aerogel for High-Performance Piezoresistive Sensor

Fengxiao Niu et al.

Summary: The novel piezoresistive sensor shows excellent performance with high sensitivity, fast response time, and low detection limit. It can maintain stable signal output even after a large number of compression cycles and efficiently detect human body activities in real time. With its potential applications in future flexible wearable electronic devices, the sensor is expected to have significant impact in the field.

ADVANCED MATERIALS TECHNOLOGIES (2021)

Add to Collection

Article Chemistry, Physical

A 3D-printed integrated MXene-based evaporator with a vertical array structure for salt-resistant solar desalination

Yi Yang et al.

Summary: The novel 3D integrated evaporator, utilizing different materials, achieves dual advantages of high photo-to-heat conversion efficiency and rapid desalination, with high light absorption rate and effective thermal confinement, improving thermal efficiency and desalination performance.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Add to Collection

Article Chemistry, Multidisciplinary

A Prussian blue-doped RGO/MXene composite aerogel with peroxidase-like activity for real-time monitoring of H2O2 secretion from living cells

Peng Zhao et al.

Summary: A novel 3D composite aerogel was developed for real-time monitoring of H2O2 secretion from living cells, demonstrating superior electrocatalytic performance and potential for pathological diagnosis through distinguishing cancer cell lines from normal cell lines.

CHEMICAL COMMUNICATIONS (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Ti3C2Tx MXene: from dispersions to multifunctional architectures for diverse applications

Ken Aldren S. Usman et al.

Summary: This review provides a comprehensive analysis of diverse solution-based processing methodologies for MXene-architecture fabrication and evaluates the processing challenges affecting material properties and device performance. Opportunities arising from these challenges are discussed to provide avenues for new designs in high performance applications.

MATERIALS HORIZONS (2021)

Add to Collection

Review Multidisciplinary Sciences

The world of two-dimensional carbides and nitrides (MXenes)

Armin Vahid Mohammadi et al.

Summary: MXenes, a family of two-dimensional materials, have diverse properties and wide-ranging applications in areas such as optics, catalysis, sensing, and medicine. Future research directions will focus on deepening the fundamental understanding of MXenes properties and exploring their potential for hybridization with other 2D materials.

SCIENCE (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Solution Plasma-Synthesized Black TiO2 Nanoparticles for Solar-Thermal Water Evaporation

Shilei Zhu et al.

Summary: Black TiO2 nanoparticles (b-TiO2) with superior solar-thermal water evaporation performance were prepared using a one-step solution plasma process (SPP). Radicals generated during SPP played a critical role in b-TiO2 formation, with a two-step mechanism proposed for its synthesis. The understanding gained from this study may inspire strategies for more efficient solar energy harvesting in solar-thermal conversion applications.

ACS APPLIED NANO MATERIALS (2021)

Add to Collection

Review Chemistry, Physical

Ti3C2Tx MXene for electrode materials of supercapacitors

Rui Ma et al.

Summary: Ti3C2Tx MXene has shown great potential as a supercapacitor electrode material due to its unique physicochemical properties. The recent advances in Ti3C2Tx-based supercapacitor electrodes, including fabrication methods, electrode structures, working mechanisms, electrochemical performance, and applications, are comprehensively reviewed and discussed, along with the challenges and future prospects outlined.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Printed aerogels: chemistry, processing, and applications

Junzong Feng et al.

Summary: Aerogels, as a lightweight and porous nanomaterial, have attracted interest in both academia and industry. However, their modest mechanical durability poses challenges, which bottom-up additive manufacturing technology has the potential to address. This technology has led to the emergence of a new interdisciplinary research area combining aerogel and printing technology, pushing the boundaries of structure and performance while broadening their application scope.

CHEMICAL SOCIETY REVIEWS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Robust and easily retrievable Pd/Ti3C2Tx⊂graphene hydrogels for efficient catalytic hydrogenation of nitroaromatic compounds

Xiuqiang Xie et al.

CHINESE CHEMICAL LETTERS (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Porous MXenes: Synthesis, structures, and applications

Fanxing Bu et al.

NANO TODAY (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Synthesis of Mo4VAlC4 MAX Phase and Two-Dimensional Mo4VC4 MXene with Five Atomic Layers of Transition Metals

Grayson Deysher et al.

ACS NANO (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Highly Stable 3D Ti3C2Tx MXene-Based Foam Architectures toward High-Performance Terahertz Radiation Shielding

Zehui Lin et al.

ACS NANO (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Scalable Synthesis of Ti3C2Tx MXene

Christopher E. Shuck et al.

ADVANCED ENGINEERING MATERIALS (2020)

Add to Collection

Article Engineering, Environmental

A lightweight and conductive MXene/graphene hybrid foam for superior electromagnetic interference shielding

Zhimin Fan et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection

Article Engineering, Environmental

Compressible, durable and conductive polydimethylsiloxane-coated MXene foams for high-performance electromagnetic interference shielding

Xinyu Wu et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection

Article Chemistry, Physical

3D-Printed Stretchable Micro-Supercapacitor with Remarkable Areal Performance

Xiran Li et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Review Construction & Building Technology

Recent progress in electromagnetic wave absorption building materials

Shuai Xie et al.

JOURNAL OF BUILDING ENGINEERING (2020)

Add to Collection

Review Chemistry, Multidisciplinary

2D MXenes for Electromagnetic Shielding: A Review

Aamir Iqbal et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Electrical and Elastic Properties of Individual Single-Layer Nb4C3Tx MXene Flakes

Alexey Lipatov et al.

ADVANCED ELECTRONIC MATERIALS (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Hollow MXene Sphere/Reduced Graphene Aerogel Composites for Piezoresistive Sensor with Ultra-High Sensitivity

Meng Zhu et al.

ADVANCED ELECTRONIC MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

The Assembly of MXenes from 2D to 3D

Zhitan Wu et al.

ADVANCED SCIENCE (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Anisotropic Electromagnetic Absorption of Aligned Ti3C2Tx MXene/Gelatin Nanocomposite Aerogels

Minglong Yang et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Pristine Titanium Carbide MXene Hydrogel Matrix

Hongwu Chen et al.

ACS NANO (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Highly Compressible, Thermally Stable, Light-Weight, and Robust Aramid Nanofibers/Ti3AlC2 MXene Composite Aerogel for Sensitive Pressure Sensor

Lin Wang et al.

ACS NANO (2020)

Add to Collection

Review Chemistry, Multidisciplinary

3D MXene Architectures for Efficient Energy Storage and Conversion

Ke Li et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection

Article Engineering, Multidisciplinary

Highly sensitive, robust and anisotropic MXene aerogels for efficient broadband microwave absorption

Yang Dai et al.

COMPOSITES PART B-ENGINEERING (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Nanocellulose-MXene Biomimetic Aerogels with Orientation-Tunable Electromagnetic Interference Shielding Performance

Zhihui Zeng et al.

ADVANCED SCIENCE (2020)

Add to Collection

Article Chemistry, Physical

Facile synthesis 3D porous MXene Ti3C2Tx@RGO composite aerogel with excellent dielectric loss and electromagnetic wave absorption

Linbo Wang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Add to Collection

Article Multidisciplinary Sciences

3D Shapeable, Superior Electrically Conductive Cellulose Nanofibers/Ti3C2Tx MXene Aerogels/Epoxy Nanocomposites for Promising EMI Shielding

Lei Wang et al.

RESEARCH (2020)

Add to Collection

Article Chemistry, Multidisciplinary

A MXene-Based Hierarchical Design Enabling Highly Efficient and Stable Solar-Water Desalination with Good Salt Resistance

Xiangqian Fan et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

3D macroscopic graphene oxide/MXene architectures for multifunctional water purification

Xin Ming et al.

CARBON (2020)

Add to Collection

Article Engineering, Environmental

Integrated NiCo2-LDHs@MXene/rGO aerogel: Componential and structural engineering towards enhanced performance stability of hybrid supercapacitor

Jinlong Zheng et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection

Review Engineering, Chemical

New hydrogel materials for improving solar water evaporation, desalination and wastewater treatment: A review

Swellam W. Sharshir et al.

DESALINATION (2020)

Add to Collection

Article Nanoscience & Nanotechnology

3D Printing of NiCoP/Ti3C2 MXene Architectures for Energy Storage Devices with High Areal and Volumetric Energy Density

Lianghao Yu et al.

NANO-MICRO LETTERS (2020)

Add to Collection

Article Chemistry, Physical

MXenes: New Horizons in Catalysis

Angel Morales-Garcia et al.

ACS CATALYSIS (2020)

Add to Collection

Review Chemistry, Physical

Integrated multifunctional macrostructures for electromagnetic wave absorption and shielding

Gehuan Wang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Add to Collection

Article Chemistry, Inorganic & Nuclear

An MXene-based aerogel with cobalt nanoparticles as an efficient sulfur host for room-temperature Na-S batteries

Qiuju Yang et al.

INORGANIC CHEMISTRY FRONTIERS (2020)

Add to Collection

Review Chemistry, Multidisciplinary

MXene hydrogels: fundamentals and applications

Yi-Zhou Zhang et al.

CHEMICAL SOCIETY REVIEWS (2020)

Add to Collection

Article Chemistry, Physical

Compressible AgNWs/Ti3C2TxMXene aerogel-based highly sensitive piezoresistive pressure sensor as versatile electronic skins

Lili Bi et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Materials for electromagnetic interference shielding

D. D. L. Chung

MATERIALS CHEMISTRY AND PHYSICS (2020)

Add to Collection

Article Chemistry, Physical

Fabrication of novel MXene (Ti3C2)/polyacrylamide nanocomposite hydrogels with enhanced mechanical and drug release properties

Peng Zhang et al.

SOFT MATTER (2020)

Add to Collection

Article Chemistry, Physical

Synthesis and electrochemical properties of 2D molybdenum vanadium carbides - solid solution MXenes

David Pinto et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Janus MXene nanosheets for macroscopic assemblies

Sai Zhao et al.

MATERIALS CHEMISTRY FRONTIERS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

All-weather-available, continuous steam generation based on the synergistic photo-thermal and electro-thermal conversion by MXene-based aerogels

Xing Zhao et al.

MATERIALS HORIZONS (2020)

Add to Collection

Article Chemistry, Physical

MXene Tunable Lamellae Architectures for Supercapacitor Electrodes

Vildan Bayram et al.

ACS APPLIED ENERGY MATERIALS (2020)

Add to Collection

Review Materials Science, Multidisciplinary

MXene-based 3D porous macrostructures for electrochemical energy storage

G. Tontini et al.

JOURNAL OF PHYSICS-MATERIALS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Nanoindentation of monolayer Tin+1CnTx MXenes via atomistic simulations: The role of composition and defects on strength

Gabriel Plummer et al.

COMPUTATIONAL MATERIALS SCIENCE (2019)

Add to Collection

Article Chemistry, Multidisciplinary

2D Early Transition Metal Carbides (MXenes) for Catalysis

Zhe Li et al.

SMALL (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Anisotropic MXene Aerogels with a Mechanically Tunable Ratio of Electromagnetic Wave Reflection to Absorption

Meikang Han et al.

ADVANCED OPTICAL MATERIALS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

3D Macroscopic Architectures from Self-Assembled MXene Hydrogels

Tongxin Shang et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Conductive MXene Nanocomposite Organohydrogel for Flexible, Healable, Low-Temperature Tolerant Strain Sensors

Hui Liao et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

3D Printing of Freestanding MXene Architectures for Current-Collector-Free Supercapacitors

Wenji Yang et al.

ADVANCED MATERIALS (2019)

Add to Collection

Article Multidisciplinary Sciences

Reconfigurable ferromagnetic liquid droplets

Xubo Liu et al.

SCIENCE (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Fast Gelation of Ti3C2Tx MXene Initiated by Metal Ions

Yaqian Deng et al.

ADVANCED MATERIALS (2019)

Add to Collection

Review Engineering, Multidisciplinary

On controlling aerogel microstructure by freeze casting

Wang Liao et al.

COMPOSITES PART B-ENGINEERING (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Ultralight and Mechanically Robust Ti3C2Tx Hybrid Aerogel Reinforced by Carbon Nanotubes for Electromagnetic Interference Shielding

Pradeep Sambyal et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Sculpting Liquids with Two-Dimensional Materials: The Assembly of Ti3C2Tx MXene Sheets at Liquid Liquid Interfaces

Jeffrey D. Cain et al.

ACS NANO (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Vertically Aligned Janus MXene-Based Aerogels for Solar Desalination with High Efficiency and Salt Resistance

Qi Zhang et al.

ACS NANO (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Self-Assembly of MXene-Surfactants at Liquid-Liquid Interfaces: From Structured Liquids to 3D Aerogels

Shaowei Shi et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Ti3C2Tx-Based Three-Dimensional Hydrogel by a Graphene Oxide-Assisted Self-Convergence Process for Enhanced Photoredox Catalysis

Yan Chen et al.

ACS NANO (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Highly Compressible and Hydrophobic Anisotropic Aerogels for Selective Oil/Organic Solvent Absorption

Xuexia Zhang et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2019)

Add to Collection

Review Materials Science, Multidisciplinary

Intrinsic and extrinsic control of freeze casting

Isaac Nelson et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)

Add to Collection

Article Chemistry, Physical

Rational design of free-standing 3D porous MXene/rGO hybrid aerogels as polysulfide reservoirs for high-energy lithium-sulfur batteries

Jianjun Song et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Near-infrared light-responsive hydrogels via peroxide-decorated MXene-initiated polymerization

Na Tao et al.

CHEMICAL SCIENCE (2019)

Add to Collection

Article Chemistry, Multidisciplinary

3D Synergistical MXene/Reduced Graphene Oxide Aerogel for a Piezoresistive Sensor

Yanan Ma et al.

ACS NANO (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Freeze-Casting Produces a Graphene Oxide Aerogel with a Radial and Centrosymmetric Structure

Chunhui Wang et al.

ACS NANO (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Rheological Characteristics of 2D Titanium Carbide (MXene) Dispersions: A Guide for Processing MXenes

Bilen Akuzum et al.

ACS NANO (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Graphene-Based Standalone Solar Energy Converter for Water Desalination and Purification

Yang Yang et al.

ACS NANO (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Liquid Letters

Shaowei Shi et al.

ADVANCED MATERIALS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Reconfigurable Printed Liquids

Joe Forth et al.

ADVANCED MATERIALS (2018)

Add to Collection

Review Chemistry, Multidisciplinary

3D Graphene Composites for Efficient Electrochemical Energy Storage

Fanxing Bu et al.

ADVANCED MATERIALS INTERFACES (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Superior structural, elastic and electronic properties of 2D titanium nitride MXenes over carbide MXenes: a comprehensive first principles study

Ning Zhang et al.

2D MATERIALS (2018)

Add to Collection

Article Multidisciplinary Sciences

MXenes stretch hydrogel sensor performance to new limits

Yi-Zhou Zhang et al.

SCIENCE ADVANCES (2018)

Add to Collection

Article Multidisciplinary Sciences

Elastic properties of 2D Ti3C2Tx MXene monolayers and bilayers

Alexey Lipatov et al.

SCIENCE ADVANCES (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Two-Dimensional MXene (Ti3C2)-Integrated Cellulose Hydrogels: Toward Smart Three-Dimensional Network Nanoplatforms Exhibiting Light-Induced Swelling and Bimodal Photothermal/Chemotherapy Anticancer Activity

Chenyan Xing et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Ultralight MXene-Coated, Interconnected SiCnws Three-Dimensional Lamellar Foams for Efficient Microwave Absorption in the X-Band

Xinliang Li et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Add to Collection

Review Chemistry, Multidisciplinary

Nanoparticle Assembly at Liquid-Liquid Interfaces: From the Nanoscale to Mesoscale

Shaowei Shi et al.

ADVANCED MATERIALS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

MXene Aerogel Scaffolds for High-Rate Lithium Metal Anodes

Xinyue Zhang et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Adaptive Structured Pickering Emulsions and Porous Materials Based on Cellulose Nanocrystal Surfactants

Yanan Li et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2018)

Add to Collection

Article Chemistry, Multidisciplinary

3D assembly of Ti3C2-MXene directed by water/oil interfaces

Renji Bian et al.

NANOSCALE (2018)

Add to Collection

Article Multidisciplinary Sciences

Thickness - independent capacitance of vertically aligned liquid-crystalline MXenes

Yu Xia et al.

NATURE (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Highly Electrically Conductive Three-Dimensional Ti3C2TX MXene/Reduced Graphene Oxide Hybrid Aerogels with Excellent Electromagnetic Interference Shielding Performances

Sai Zhao et al.

ACS NANO (2018)

Add to Collection

Review Chemistry, Multidisciplinary

Electronic and Optical Properties of 2D Transition Metal Carbides and Nitrides (MXenes)

Kanit Hantanasirisakul et al.

ADVANCED MATERIALS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Multifunctional, Superelastic, and Lightweight MXene/Polyimide Aerogels

Ji Liu et al.

SMALL (2018)

Add to Collection

Article Chemistry, Multidisciplinary

3D Ti3C2Tx aerogels with enhanced surface area for high performance supercapacitors

Xinyu Wang et al.

NANOSCALE (2018)

Add to Collection

Article Chemistry, Physical

Porous Cryo-Dried MXene for Efficient Capacitive Deionization

Weizhai Bao et al.

JOULE (2018)

Add to Collection

Article Multidisciplinary Sciences

Two-dimensional Mo1.33C MXene with divacancy ordering prepared from parent 3D laminate with in-plane chemical ordering

Quanzheng Tao et al.

NATURE COMMUNICATIONS (2017)

Add to Collection

Review Materials Science, Multidisciplinary

Electronic properties and applications of MXenes: a theoretical review

Mohammad Khazaei et al.

JOURNAL OF MATERIALS CHEMISTRY C (2017)

Add to Collection

Article Energy & Fuels

Ultra-high-rate pseudocapacitive energy storage in two-dimensional transition metal carbides

Maria R. Lukatskaya et al.

NATURE ENERGY (2017)

Add to Collection

Review Nanoscience & Nanotechnology

2D metal carbides and nitrides (MXenes) for energy storage

Babak Anasori et al.

NATURE REVIEWS MATERIALS (2017)

Add to Collection

Article Multidisciplinary Sciences

Prediction and synthesis of a family of atomic laminate phases with Kagome-like and in-plane chemical ordering

Martin Dahlqvist et al.

SCIENCE ADVANCES (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Hydrophobic, Flexible, and Lightweight MXene Foams for High-Performance Electromagnetic-Interference Shielding

Ji Liu et al.

ADVANCED MATERIALS (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Hollow MXene Spheres and 3D Macroporous MXene Frameworks for Na-Ion Storage

Meng-Qiang Zhao et al.

ADVANCED MATERIALS (2017)

Add to Collection

Article Chemistry, Physical

Oxidation Stability of Colloidal Two-Dimensional Titanium Carbides (MXenes)

Chuanfang John Zhang et al.

CHEMISTRY OF MATERIALS (2017)

Add to Collection

Article Chemistry, Multidisciplinary

High-Throughput Survey of Ordering Configurations in MXene Alloys Across Compositions and Temperatures

Teck Leong Tan et al.

ACS NANO (2017)

Add to Collection

Article Chemistry, Multidisciplinary

MXene Ti3C2: An Effective 2D Light-to-Heat Conversion Material

Renyuan Li et al.

ACS NANO (2017)

Add to Collection

Article Chemistry, Physical

Self-assembly of nanomaterials at fluid interfaces

Anju Toor et al.

EUROPEAN PHYSICAL JOURNAL E (2016)

Add to Collection

Article Multidisciplinary Sciences

Electromagnetic interference shielding with 2D transition metal carbides (MXenes)

Faisal Shahzad et al.

SCIENCE (2016)

Add to Collection

Article Chemistry, Physical

MXene as a novel intercalation-type pseudocapacitive cathode and anode for capacitive deionization

Pattarachai Srimuk et al.

JOURNAL OF MATERIALS CHEMISTRY A (2016)

Add to Collection

Article Nanoscience & Nanotechnology

Effect of Synthesis on Quality, Electronic Properties and Environmental Stability of Individual Monolayer Ti3C2 MXene Flakes

Alexey Lipatov et al.

ADVANCED ELECTRONIC MATERIALS (2016)

Add to Collection

Article Materials Science, Ceramics

Two-Dimensional Nb-Based M4C3 Solid Solutions (MXenes)

Jian Yang et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Two-Dimensional, Ordered, Double Transition Metals Carbides (MXenes)

Babak Anasori et al.

ACS NANO (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Broadband and Tunable High-Performance Microwave Absorption of an Ultralight and Highly Compressible Graphene Foam

Yi Zhang et al.

ADVANCED MATERIALS (2015)

Add to Collection

Review Chemistry, Multidisciplinary

Graphene-based membranes

Gongping Liu et al.

CHEMICAL SOCIETY REVIEWS (2015)

Add to Collection

Article Nanoscience & Nanotechnology

Molecular dynamic study of the mechanical properties of two-dimensional titanium carbides Tin+1Cn (MXenes)

Vadym N. Borysiuk et al.

NANOTECHNOLOGY (2015)

Add to Collection

Review Chemistry, Multidisciplinary

Self-Assembly of Graphene Oxide at Interfaces

Jiao-Jing Shao et al.

ADVANCED MATERIALS (2014)

Add to Collection

Review Chemistry, Multidisciplinary

Graphene-based macroscopic assemblies and architectures: an emerging material system

Huai-Ping Cong et al.

CHEMICAL SOCIETY REVIEWS (2014)

Add to Collection

Article Multidisciplinary Sciences

Stabilizing Liquid Drops in Nonequilibrium Shapes by the Interfacial Jamming of Nanoparticles

Mengmeng Cui et al.

SCIENCE (2013)

Add to Collection

Article Chemistry, Multidisciplinary

Two-Dimensional Transition Metal Carbides

Michael Naguib et al.

ACS NANO (2012)

Add to Collection

Article Chemistry, Multidisciplinary

Two-Dimensional Nanocrystals Produced by Exfoliation of Ti3AlC2

Michael Naguib et al.

ADVANCED MATERIALS (2011)

Add to Collection

Review Chemistry, Multidisciplinary

Synthesis of Nano/Microstructures at Fluid Interfaces

Zhongwei Niu et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2010)

Add to Collection

Article Multidisciplinary Sciences

Biomaterials by freeze casting

Ulrike G. K. Wegst et al.

PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES (2010)

Add to Collection

Review Multidisciplinary Sciences

Science and technology for water purification in the coming decades

Mark A. Shannon et al.

NATURE (2008)

Add to Collection

Article Chemistry, Multidisciplinary

Aligned porous structures by directional freezing

Haifei Zhang et al.

ADVANCED MATERIALS (2007)

Add to Collection

Article Materials Science, Multidisciplinary

Ice-templated porous alumina structures

Sylvain Deville et al.

ACTA MATERIALIA (2007)

Add to Collection

Article Multidisciplinary Sciences

Nanoparticle assembly and transport at liquid-liquid interfaces

Y Lin et al.

SCIENCE (2003)

Add to Collection

Review Chemistry, Multidisciplinary

Chemistry of aerogels and their applications

AC Pierre et al.

CHEMICAL REVIEWS (2002)

Add to Collection

Review Chemistry, Physical

Electromagnetic interference shielding effectiveness of carbon materials

DDL Chung

CARBON (2001)

Add to Collection

© Peeref 2019-2024. All rights reserved.