Related references
Note: Only part of the references are listed.Mechanical characterization of boron carbide single crystals
Arezoo Zare et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2022)
Nanocrystalline Cubic Silicon Carbide: A Route to Superhardness
Rongxin Sun et al.
SMALL (2022)
Synthesis of boron carbide from its elements up to 13 GPa
Amrita Chakraborti et al.
JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS (2021)
Stress-induced amorphization triggers deformation in the lithospheric mantle
Vahid Samae et al.
NATURE (2021)
Dislocation-mediated shear amorphization in boron carbide
Kolan Madhav Reddy et al.
SCIENCE ADVANCES (2021)
Transition between Hall-Petch and inverse Hall-Petch behavior in nanocrystalline silicon carbide
Saeed Zare Chavoshi et al.
PHYSICAL REVIEW MATERIALS (2021)
Amorphization-governed elasto-plastic deformation under nanoindentation in cubic (3C) silicon carbide
Liang Zhao et al.
CERAMICS INTERNATIONAL (2020)
Grain size dependence of hardness in nanocrystalline silicon carbide
Chenglong Pan et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)
Synthesis of boron carbide from its elements at high pressures and high temperatures
A. Chakraborti et al.
SOLID STATE SCIENCES (2020)
Design and strategy for next-generation silicon carbide composites for nuclear energy
Takaaki Koyanagi et al.
JOURNAL OF NUCLEAR MATERIALS (2020)
Shear driven formation of nano-diamonds at sub-gigapascals and 300 K
Yang Gao et al.
CARBON (2019)
Characterization of hardness, elastic modulus and fracture toughness of RB-SiC ceramics at elevated temperature by Vickers test
Xiaoshuang Rao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Graphite interface mediated grain-boundary sliding leads to enhanced mechanical properties of nanocrystalline silicon carbide
Kolan Madhav Reddy et al.
MATERIALIA (2019)
Below the Hall-Petch Limit in Nanocrystalline Ceramics
Heonjune Ryou et al.
ACS NANO (2018)
Ultrafine-grained boron carbide ceramics fabricated via ultrafast sintering assisted by high-energy ball milling
Xiaorong Zhang et al.
CERAMICS INTERNATIONAL (2018)
Microstructure and mechanical properties of fine-grained boron carbide ceramics fabricated by high-pressure hot pressing combined with high-energy ball milling
Xiaorong Zhang et al.
CERAMICS INTERNATIONAL (2018)
Enhanced properties of pure alumina ceramics by oscillatory pressure sintering
Yao Han et al.
CERAMICS INTERNATIONAL (2018)
Preparation, microstructure and toughening mechanism of superhard ultrafine-grained boron carbide ceramics with outstanding fracture toughness
Xiaorong Zhang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Shock-induced amorphization in silicon carbide
S. Zhao et al.
ACTA MATERIALIA (2018)
Grain Boundary Sliding and Amorphization are Responsible for the Reverse Hall-Petch Relation in Superhard Nanocrystalline Boron Carbide
Dezhou Guo et al.
PHYSICAL REVIEW LETTERS (2018)
Effects of pressure on densification behaviour, microstructures and mechanical properties of boron carbide ceramics fabricated by hot pressing
Xiaorong Zhang et al.
CERAMICS INTERNATIONAL (2017)
Mechanical behaviour at high temperature of spark plasma sintered boron carbide ceramics
R. Belon et al.
CERAMICS INTERNATIONAL (2017)
Two-dimensional grain boundary sliding and mantle dislocation accommodation in ODS ferritic steel
Hiroshi Masuda et al.
ACTA MATERIALIA (2016)
Microstructural Characterization of a Commercial Hot-Pressed Boron Carbide Armor Plate
Kelvin Y. Xie et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2016)
Enhancing the spark-plasma sinterability of B4C nanopowders via room-temperature methylation induced purification
Bibi Malmal Moshtaghioun et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2016)
Grain size dependence of hardness and fracture toughness in pure near fully-dense boron carbide ceramics
Bibi Malmal Moshtaghioun et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2016)
Densification of B4C nanopowder with nanograin retention by spark-plasma sintering
Bibi Malmal Moshtaghioun et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2015)
The rate-dependent fracture toughness of silicon carbide- and boron carbide-based ceramics
John Pittari et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2015)
Mechanical characterization of fine grained silicon carbide consolidated using polymer pyrolysis and spark plasma sintering
Arif Rahman et al.
CERAMICS INTERNATIONAL (2014)
Densification behavior and related phenomena of spark plasma sintered boron carbide
Xiaoguang Li et al.
CERAMICS INTERNATIONAL (2014)
Additive-free superhard B4C with ultrafine-grained dense microstructures
B. Malmal Moshtaghioun et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2014)
Atomistic Explanation of Shear-Induced Amorphous Band Formation in Boron Carbide
Qi An et al.
PHYSICAL REVIEW LETTERS (2014)
Effect of spark plasma sintering parameters on microstructure and room-temperature hardness and toughness of fine-grained boron carbide (B4C)
Bibi Malmal Moshtaghioun et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2013)
Advances in silicon carbide science and technology at the micro- and nanoscales
Roya Maboudian et al.
JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A (2013)
Anisotropy of single-crystal 3C-SiC during nanometric cutting
Saurav Goel et al.
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2013)
Ultrahard nanotwinned cubic boron nitride
Yongjun Tian et al.
NATURE (2013)
Superplastic nanocrystalline ceramics at room temperature and high strain rates
J. Y. Zhang et al.
SCRIPTA MATERIALIA (2013)
Atomic structure of amorphous shear bands in boron carbide
K. Madhav Reddy et al.
NATURE COMMUNICATIONS (2013)
Creation of Nanostuctures by Extreme Conditions: High-Pressure Synthesis of Ultrahard Nanocrystalline Cubic Boron Nitride
Vladimir L. Solozhenko et al.
ADVANCED MATERIALS (2012)
Enhanced mechanical properties of nanocrystalline boron carbide by nanoporosity and interface phases
K. Madhav Reddy et al.
NATURE COMMUNICATIONS (2012)
The conflicts between strength and toughness
Robert O. Ritchie
NATURE MATERIALS (2011)
The Phase Behavior of Interfaces
Martin P. Harmer
SCIENCE (2011)
Synthesis and consolidation of boron carbide: a review
A. K. Suri et al.
INTERNATIONAL MATERIALS REVIEWS (2010)
Static and dynamic mechanical properties of boron carbide processed by spark plasma sintering
S. Hayun et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2009)
Sintering Behavior and Mechanical Property of B4C Ceramics Fabricated by Spark Plasma Sintering
Kyoung Hun Kim et al.
JOURNAL OF THE KOREAN CERAMIC SOCIETY (2008)
Theory of shear banding in metallic glasses and molecular dynamics calculations
Futoshi Shimizu et al.
MATERIALS TRANSACTIONS (2007)
Dynamic indentation response of fine-grained boron carbide
Dipankar Ghosh et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2007)
Interaction potential for silicon carbide: A molecular dynamics study of elastic constants and vibrational density of states for crystalline and amorphous silicon carbide
Priya Vashishta et al.
JOURNAL OF APPLIED PHYSICS (2007)
Mechanical properties of nanocrystalline materials
MA Meyers et al.
PROGRESS IN MATERIALS SCIENCE (2006)
Fracture strength of silicon carbide microspecimens
WN Sharpe et al.
JOURNAL OF MICROELECTROMECHANICAL SYSTEMS (2005)
A crossover in the mechanical response of nanocrystalline ceramics
I Szlufarska et al.
SCIENCE (2005)
Density- and hardness-optimized pressureless sintered and post-hot isostatic pressed B4C
NT Cho et al.
JOURNAL OF MATERIALS RESEARCH (2005)
Grain-size dependence of the relationship between intergranular and intragranular deformation of nanocrystalline Al by molecular dynamics simulations
T Shimokawa et al.
PHYSICAL REVIEW B (2005)
Superhard nanocrystalline silicon carbide films
F Liao et al.
APPLIED PHYSICS LETTERS (2005)
Analytical potential for atomistic simulations of silicon, carbon, and silicon carbide
P Erhart et al.
PHYSICAL REVIEW B (2005)
Atomistic processes during nanoindentation of amorphous silicon carbide
I Szlufarska et al.
APPLIED PHYSICS LETTERS (2005)
Dynamic behavior of boron carbide
TJ Vogler et al.
JOURNAL OF APPLIED PHYSICS (2004)
Dynamic strength and fragmentation of hot-pressed silicon carbide under uniaxial compression
H Wang et al.
ACTA MATERIALIA (2004)
Structural damage in boron carbide under contact loading
D Ge et al.
ACTA MATERIALIA (2004)
Grain boundary-mediated plasticity in nanocrystalline nickel
ZW Shan et al.
SCIENCE (2004)
Nanoindentation-induced amorphization in silicon carbide
I Szlufarska et al.
APPLIED PHYSICS LETTERS (2004)
Evaluation of machining performance of STAVAX with PCBN tools
WYH Liew et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2004)
Synthesis and characterization of boron carbide nanoparticles
S Chen et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2004)
Diffusion in nanocrystalline metals and alloys -: A status report
R Würschum et al.
ADVANCED ENGINEERING MATERIALS (2003)
Shock-induced localized amorphization in boron carbide
MW Chen et al.
SCIENCE (2003)
Microstructure and mechanical properties of boron carbide thin films
ZH Han et al.
MATERIALS LETTERS (2002)
Nanoindentation and Raman spectroscopy studies of boron carbide single crystals
V Domnich et al.
APPLIED PHYSICS LETTERS (2002)
Ultrananocrystalline diamond thin films for MEMS and moving mechanical assembly devices
AR Krauss et al.
DIAMOND AND RELATED MATERIALS (2001)
Dynamic compressive strength of silicon carbide under uniaxial compression
S Sarva et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2001)
Damage evolution in dynamic deformation of silicon carbide
CJ Shih et al.
ACTA MATERIALIA (2000)