Related references
Note: Only part of the references are listed.Influence of ECAP processing temperature and number of passes on hardness and microstructure of Al-6063
Akash Gupta et al.
ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES (2022)
Effect of Y content and equal channel angular pressing on the microstructure, texture and mechanical property of extruded Mg-Y alloys
W. Yang et al.
JOURNAL OF MAGNESIUM AND ALLOYS (2022)
Nanomaterials by severe plastic deformation: review of historical developments and recent advances
Kaveh Edalati et al.
MATERIALS RESEARCH LETTERS (2022)
Effect of severe plastic deformation process on microstructure and mechanical properties of AlSi/SiC composite
Wojciech Maziarz et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)
Microstructure and mechanical properties of 7005 aluminum alloy processed by one-pass equal channel reciprocating extrusion
Ju-fu Jiang et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2021)
Effect of Equal-channel angular pressing on mechanical Properties: An overview
Akash Gupta et al.
MATERIALS TODAY-PROCEEDINGS (2021)
ECAP of titanium alloy by sever plastic deformation: A review
Mallikarjun B. Koujalagi et al.
MATERIALS TODAY-PROCEEDINGS (2021)
Influence of ECAP processing on mechanical and wear properties of brass alloy
Hussein Naser Radhi et al.
MATERIALS TODAY-PROCEEDINGS (2021)
Effect of ECAP temperature on the microstructure, texture evolution and mechanical properties of pure magnesium
Prakash C. Gautam et al.
MATERIALS TODAY-PROCEEDINGS (2021)
A new severe plastic deformation method: thin-walled open channel angular pressing (TWO-CAP)
Mehmet Sahbaz et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)
Impact of ECAP on wear performance of Al-Mn magnesium alloy
K. R. Gopi et al.
MATERIALS RESEARCH EXPRESS (2020)
Effects of hot forming cold die quenching and inter-pass solution treatment on the evolution of microstructure and mechanical properties of AA2024 aluminum alloy after equal channel angular pressing
A. Baghbani Barenji et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Application of linear friction welding for joining ultrafine grained aluminium
Marta Orlowska et al.
JOURNAL OF MANUFACTURING PROCESSES (2020)
Comparisons of microstructure homogeneity, texture and mechanical properties of AZ80 magnesium alloy fabricated by annular channel angular extrusion and backward extrusion
Xi Zhao et al.
JOURNAL OF MAGNESIUM AND ALLOYS (2020)
The impact of severe plastic deformations obtained by hydrostatic extrusion on the machinability of ultrafine-grained AA5083 alloy
Jacek Skiba et al.
JOURNAL OF MANUFACTURING PROCESSES (2020)
Twin parallel channel angular extrusion as a development of ECAE in parallel channels
M. Abdi et al.
SN APPLIED SCIENCES (2020)
The Effect of ECAP Temperature on the Microstructure and Properties of a Rolled Rare Earth Magnesium Alloy
Yun Tan et al.
MATERIALS (2019)
Inducing heterogeneity in an austenitic stainless steel by equal channel angular sheet extrusion (ECASE)
Jairo Alberto Munoz et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)
High Pressure Tube Twisting for Producing Ultra Fine Grained Materials: A Review
Laszlo S. Toth et al.
MATERIALS TRANSACTIONS (2019)
Influence of Grain Refinement by ECAP on Mechanical and Erosion Corrosion Properties of AISI 4130 Steel: Experimental and Prediction Approach
Osama M. Irfan et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2019)
Development of a High Strength Mg-9Li Alloy via Multi-Pass ECAP and Post-Rolling
Edwin Eyram Klu et al.
METALS (2019)
Influence of equal channel angular extrusion on the tensile behavior of Aluminum 6063 alloy
O. P. Abioye et al.
2ND INTERNATIONAL CONFERENCE ON SUSTAINABLE MATERIALS PROCESSING AND MANUFACTURING (SMPM 2019) (2019)
Strengthening of AA5052 aluminum alloy by equal channel angular pressing followed by softening at room temperature
M. Howeyze et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Experimental and theoretical analysis of microstructural evolution and deformation behaviors of CuW composites during equal channel angular pressing
Wenge Chen et al.
MATERIALS & DESIGN (2018)
Mechanical Properties and Microstructure Evolution of Mg-6 wt % Zn Alloy during Equal-Channel Angular Pressing
Jingli Yan et al.
METALS (2018)
Severe Plastic Deformation - A Review
R. N. Harsha et al.
MATERIALS TODAY-PROCEEDINGS (2018)
Cyclic extrusion compression angular pressing (CECAP) as a novel severe plastic deformation method for producing bulk ultrafine grained metals
Mahnaz Ensafi et al.
MATERIALS LETTERS (2017)
Spiral equal channel angular extrusion (Sp-ECAE) as a modified ECAE process
Abbas Fadaei et al.
MATERIALS & DESIGN (2017)
Effect of Equal Channel Angular Pressing Process on the Hardness and Microstructure of Copper and Al-6082 Alloy: A Preliminary Investigation
N. V. Ramesh Maganti et al.
MATERIALS TODAY-PROCEEDINGS (2017)
Sub-structure and mechanical properties of twist channel angular pressed aluminium
Radim Kocich et al.
MATERIALS CHARACTERIZATION (2016)
High Pressure Torsion Extrusion as a new severe plastic deformation process
Yu. Ivanisenko et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Effect of ECAP temperature on microstructure and mechanical properties of Al-Zn-Mg-Cu alloy
M. H. Shaeri et al.
PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2016)
Effect of ECAP temperature on microstructure and mechanical properties of Al-Zn-Mg-Cu alloy
M. H. Shaeri et al.
PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2016)
Severe plastic deformation of tubular AA 6061 via equal channel angular pressing
D. M. Jafarlou et al.
MATERIALS & DESIGN (2016)
Expansion equal channel angular extrusion, as a novel severe plastic deformation technique
S. Sepahi-Boroujeni et al.
JOURNAL OF MATERIALS SCIENCE (2015)
Combination of sever plastic deformation and precipitation hardening processes affecting the mechanical properties in Al-Mg-Si alloy
Bahman Mirzakhani et al.
MATERIALS & DESIGN (2015)
Evolution of mechanical properties of LAE442 magnesium alloy processed by extrusion and ECAP
Peter Minarik et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2015)
Mechanical properties and machinability of 6061 aluminum alloy produced by equal-channel angular pressing
Yashar Bayat Asl et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2015)
An investigation on work hardening of Al-1%Mg processed by Equal Channel Angular Pressing
R. Haghayeghi et al.
MATERIALS LETTERS (2014)
Twist channel multi-angular pressing (TCMAP) as a new SPD process: Numerical and experimental study
Radim Kocich et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Novel molding technique for ECAP process and effects on hardness of AA7075
H. Kaya et al.
MECHANIKA (2014)
Refinement of tungsten microstructure upon severe plastic deformation
A. V. Ganeev et al.
PHYSICS OF METALS AND METALLOGRAPHY (2014)
A planar twist channel angular extrusion (PTCAE) as a novel severe plastic deformation method based on equal channel angular extrusion (ECAE) method
Mahmoud Shamsborhan et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2014)
Effect of Processing Routes on AZ31 Alloy Processed By Severe Plastic Deformation
Muralidhar Avvari et al.
INTERNATIONAL CONFERENCE ON ADVANCES IN MANUFACTURING AND MATERIALS ENGINEERING (ICAMME 2014) (2014)
A Modification on ECAP Process by Incorporating Twist Channel
Hosein Bisadi et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2013)
Artificial Neural Network Modeling of ECAP Process
F. Djavanroodi et al.
MATERIALS AND MANUFACTURING PROCESSES (2013)
Evolution of the microstructure and mechanical properties of AZ61 alloy processed by half channel angular extrusion (HCAE), a novel severe plastic deformation process
Kyungjin Kim et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Evolution of Strength and Homogeneity in a Magnesium AZ31 Alloy Processed by High-Pressure Torsion at Different Temperatures
Yi Huang et al.
ADVANCED ENGINEERING MATERIALS (2012)
Effects of extrusion and equal channel angular pressing on the microstructure, tensile and fatigue behaviour of the wrought magnesium alloy AZ80
F. Fereshteh-Saniee et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2012)
Forming of Tubular Commercial Purity Aluminum by ECAP
James Valder et al.
MATERIALS AND MANUFACTURING PROCESSES (2012)
Production of Ti-6Al-4V billet through compaction of blended elemental powders by equal-channel angular pressing
Christian Haase et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Consolidation of commercial pure aluminum powder by torsional-equal channel angular pressing (T-ECAP) at room temperature
Behtash Mani et al.
POWDER TECHNOLOGY (2012)
Improvement of fatigue strength of a Mg-Zn-Zr alloy by integrated extrusion and equal-channel angular pressing
Alexei Vinogradov et al.
SCRIPTA MATERIALIA (2012)
Principles of severe plastic deformation using tube high-pressure shearing
Jing Tao Wang et al.
SCRIPTA MATERIALIA (2012)
Severe Plastic Deformation Techniques for Bulk Ultrafine-grained Materials
Wang Chengpeng et al.
RARE METAL MATERIALS AND ENGINEERING (2012)
Structure and mechanical properties of commercial purity titanium processed by ECAP at room temperature
Yue Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
A modification on ECAP process by incorporating torsional deformation
Behtash Mani et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Study of friction stir processing (FSP) and high pressure torsion (HPT) and their effect on mechanical properties
K. Hans Raj et al.
11TH INTERNATIONAL CONFERENCE ON THE MECHANICAL BEHAVIOR OF MATERIALS (ICM11) (2011)
Avoiding cracks and inhomogeneities in billets processed by ECAP
Paulo R. Cetlin et al.
JOURNAL OF MATERIALS SCIENCE (2010)
Textural evaluation of copper produced by equal channel angular pressing with routes A and B30
Farideh Salimyanfard et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Fatigue design factors for ECAPed materials
F. Djavanroodi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
The processing of pure titanium through multiple passes of ECAP at room temperature
Xicheng Zhao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Effect of Preheating Temperature on ECAP Formability of AC4CH Aluminum Casting Alloy
Yoshihiro Nakayama et al.
MATERIALS TRANSACTIONS (2010)
Equal channel angular pressing-forward extrusion (ECAP-FE) consolidation of Al particles
M. H. Paydar et al.
MATERIALS & DESIGN (2009)
Development of the equal-channel angular hydroextrusion
Victor Spuskanyuk et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2008)
Effect of Sc and Zr additions on the microstructure and fatigue properties of AA6106 produced by equal-channel-angular-pressing
P. Cavaliere et al.
MATERIALS CHARACTERIZATION (2008)
Consolidation of Al particles through forward extrusion-equal channel angular pressing (FE-ECAP)
M. H. Paydar et al.
MATERIALS LETTERS (2008)
Processing of ultrafine-grained materials using severe plastic deformation: potential for achieving exceptional properties
T. G. Langdon
REVISTA DE METALURGIA (2008)
Microstructure and properties of pure titanium processed by equal-channel angular pressing at room temperature
Xicheng Zhao et al.
SCRIPTA MATERIALIA (2008)
Deformation temperature and postdeformation annealing effects on severely deformed TiNi alloy by equal channel angular extrusion
Zhenhua Li et al.
JOURNAL OF UNIVERSITY OF SCIENCE AND TECHNOLOGY BEIJING (2007)
The processing of difficult-to-work alloys by ECAP with an emphasis on magnesium alloys
Roberto B. Figueiredo et al.
ACTA MATERIALIA (2007)
Fatigue strength of ultrafine-grained pure Ti after severe plastic deformation
WJ Kim et al.
SCRIPTA MATERIALIA (2006)
Back pressure equal channel angular consolidation of pure Al particles
K Xia et al.
SCRIPTA MATERIALIA (2005)
Compaction of amorphous aluminum alloy powder by direct extrusion and equal channel angular extrusion
ON Senkov et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
Tensile deformation characteristics of a nano-structured 5083 Al alloy
SY Chang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2005)
Severe plastic deformation as a processing tool for developing superplastic metals
C Xu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2004)
Strain hardening, strain rate sensitivity, and ductility of nanostructured metals
YM Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
Strength enhancement and deformation behavior of gold after equal-channel angular pressing
T Suzuki et al.
MATERIALS TRANSACTIONS (2004)
Consolidation of amorphous copper based powder by equal channel angular extrusion
J Robertson et al.
JOURNAL OF NON-CRYSTALLINE SOLIDS (2003)
Improvement of mechanical properties for Al alloys using equal-channel angular pressing
Z Horita et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2001)
Formation of fine cementite precipitates by static annealing of equal-channel angular pressed low-carbon steels
DH Shin et al.
ACTA MATERIALIA (2001)
Plastic deformation analysis of metals during equal channel angular pressing
HS Kim et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2001)
Influence of ECAP routes on the microstructure and properties of pure Ti
VV Stolyarov et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2001)
Share Paper
