☆ 4.5 Article

A DFT Characterization of Structural, Mechanical, and Thermodynamic Properties of Ag9In4 Binary Intermetallic Compound

METALS (2022)

Related references

Note: Only part of the references are listed.

Article Materials Science, Multidisciplinary

Intermetallic compound formation and growth behavior at the interface between indium and Au/Ni(V) metallization

Li-Chi Huang et al.

Summary: This study investigates the liquid/solid and solid/solid reactions between pure indium and Au/Ni(V) surface finish, revealing the formation of (Ni,Au)28In72 and Ni-V-In intermetallic compounds at temperatures of 220-260 degrees C and 100-150 degrees C, respectively. The growth kinetics of these compounds show the transformation of Ni(V) to Ni-V-In and the acceleration of reactions in the liquid/solid phase.

MATERIALS CHARACTERIZATION (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Crystal Chemistry and Electronic Properties of the Al-Rich Compounds, Al2Cu, ω-Al7Cu2Fe and θ-Al13Fe4 with Cu Solution

Changming Fang et al.

Summary: In this study, the Cu solution behavior in the Al-Cu-Fe system was investigated using first-principles density functional theory (DFT). It was found that Cu prefers to dissolve in Al-7 at ambient conditions, forming a ternary theta-Al76Cu2Fe24 alloy. At high temperatures, Cu can dissolve in both Al-7 and Al-9, forming theta-Al76Cu2Fe24. The stability and properties of the Al-rich compounds were also studied. The importance of applying the Hubbard U correction to the standard DFT functionals for Cu-containing metallic materials was demonstrated. This study helps characterize intermetallic compounds in Cu-containing Al alloys and control Fe-containing intermetallic compounds in the solidification of Al-based alloys.

METALS (2022)

Add to Collection

Article Engineering, Electrical & Electronic

Interfacial reactions between pure indium solder and Au/Ni metallization

Li-Chi Huang et al.

Summary: Thermal interface material (TIM) is receiving significant attention due to the increasing demand for efficient heat dissipation in high-performance microelectronic packages. This study investigates the interfacial reactions between indium and Au/Ni in the solid-liquid interdiffusion (SLID) and thermal aging processes. The results provide important insights for the reliability assessment of TIM joints.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

First-Principles Study on the Elastic Mechanical Properties and Anisotropies of Gold-Copper Intermetallic Compounds

Jian Wang et al.

Summary: In this study, first-principles calculations were used to investigate the lattice constants, elastic constants, and mechanical properties of gold-copper intermetallic compounds. The anisotropy of Young's modulus, shear modulus, and Poisson's ratio in different crystal planes was confirmed. The results showed that AuCu3 had the highest anisotropy among the compounds.

METALS (2022)

Add to Collection

Article Chemistry, Physical

Non-metallic carbon-based catalysts for acetylene hydrochlorination: The effect of graphitization degree of carbonaceous material

Qi Tang et al.

Summary: The graphitization degree of activated carbon fiber (ACF) affects its catalytic performance, but the relationship is not monotonic. The interface between the graphite layer and the support acts as the catalytic active site, and the difference in the degree of exposure of the active interface results in the difference in catalytic activity.

CATALYSIS COMMUNICATIONS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Anisotropic Elastic and Thermal Properties of M2InX (M = Ti, Zr and X = C, N) Phases: A First-Principles Calculation

Bo Li et al.

Summary: First-principles calculations were used to estimate the anisotropic elastic and thermal properties of Ti(2)lnX (X = C, N) and Zr(2)lnX (X = C, N) M(2)AX phases. The findings showed that these materials are brittle and exhibit different elasticity and anisotropy. The Debye temperature, sound velocity, and thermal conductivity were also determined.

METALS (2022)

Add to Collection

Editorial Material Materials Science, Multidisciplinary

Emerging Interconnection Technology and Pb-Free Solder Materials for Advanced Microelectronic Packaging

Byungmin Ahn

METALS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

First-Principles Calculations of Thermal and Electrical Transport Properties of bcc and fcc Dilute Fe-X (X = Al, Co, Cr, Mn, Mo, Nb, Ni, Ti, V, and W) Binary Alloys

Yang Lin et al.

Summary: The study investigates the impact of alloying elements on the thermal conductivity of ultra-high-strength steels and predicts their contributions to electronic and lattice thermal conductivity. This research provides theoretical guidance for the design of ultra-high-strength steels with high thermal conductivity.

METALS (2021)

Add to Collection

Article Engineering, Electrical & Electronic

Opportunities, Challenges, and Potential Solutions in the Application of Fast-Switching SiC Power Devices and Converters

Xibo Yuan et al.

Summary: SiC devices offer opportunities for efficiency and power density improvement in power electronics, but also present design challenges. This article presents potential solutions to address application challenges and fully exploit the benefits of SiC devices while mitigating their negative effects.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2021)

Add to Collection

Article Engineering, Electrical & Electronic

Interfacial Reactions of Sn-3.0Ag-0.5Cu Solder with Sputter Cu-Ti Alloy Film UBM

Yupeng Wang et al.

Summary: The systematic investigation on the influence of Ti additive in a SAC/Cu-Ti soldered joint reveals the formation of needle-like IMC and the inhibition of Cu3Sn growth and Kirkendall voids. The segregation of Ti at grain boundaries forms a titanium-rich layer, acting as a diffusion barrier and enhancing the shear strength of the joint. These results confirm that Cu-Ti UBM contributes to the improvement of welding reliability.

JOURNAL OF ELECTRONIC MATERIALS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Anisotropies in Elasticity, Sound Velocity, and Minimum Thermal Conductivity of Low Borides VxBy Compounds

Jing Yu et al.

Summary: Anisotropies in the elasticity, sound velocity, and minimum thermal conductivity of low borides VB, V5B6, V3B4, and V2B3 were discussed using first-principles calculations. The results showed that with increased B content, the degree of anisotropy of the bulk modulus increases while those of the shear modulus and Young's modulus decrease.

METALS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Evaluation of Shear Properties of Indium Solder Alloys for Cryogenic Applications

Madhuri Deshpande et al.

Summary: Different indium solder alloys were developed and characterized for their shear properties, with the Cu/In-3Ag/Cu joint showing the highest shear strength under cryogenic temperature conditions.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2021)

Add to Collection

Article Chemistry, Physical

Theoretical and Experimental Investigation of Warpage Evolution of Flip Chip Package on Packaging during Fabrication

Hsien-Chie Cheng et al.

Summary: This study investigates the warpage behavior of a flip chip package-on-package assembly during fabrication process using a process simulation framework integrating thermal and mechanical finite element analysis. The study proposes a novel effective approach to estimate the effective orthotropic elastic properties of the coreless substrate and core interposer. The results of the study show good agreement with traditional methods and are validated using in-line measurement data.

MATERIALS (2021)

Add to Collection

Article Engineering, Electrical & Electronic

Nanomechanical Responses of an Intermetallic Compound Layer in Transient Liquid Phase Bonding Using Indium

Jenn-Ming Song et al.

JOURNAL OF ELECTRONIC MATERIALS (2020)

Add to Collection

Article Engineering, Manufacturing

Viscoelastic Warpage Modeling of Fan-Out Wafer-Level Packaging During Wafer-Level Mold Cure Process

Hsien-Chie Cheng et al.

IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY (2020)

Add to Collection

Article Engineering, Electrical & Electronic

The structural stability and optical properties of NiPt nanomaterial from first-principles investigations

Yong Pan

MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING (2020)

Add to Collection

Review Engineering, Multidisciplinary

A critical review on performance, microstructure and corrosion resistance of Pb-free solders

M. A. Fazal et al.

MEASUREMENT (2019)

Add to Collection

Article Materials Science, Multidisciplinary

N-, B-, P-, Al-, As-, and Ga-graphdiyne/graphyne lattices: first-principles investigation of mechanical, optical and electronic properties

Bohayra Mortazavi et al.

JOURNAL OF MATERIALS CHEMISTRY C (2019)

Add to Collection

Article Chemistry, Multidisciplinary

First-Principles Study on the Structural and Electronic Properties of Monolayer MoS2 with S-Vacancy under Uniaxial Tensile Strain

Weidong Wang et al.

NANOMATERIALS (2018)

Add to Collection

Article Engineering, Manufacturing

Board-Level Drop Impact Reliability of Silicon Interposer-Based 2.5-D IC Integration

Hsien-Chie Cheng et al.

IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY (2016)

Add to Collection

Article Engineering, Electrical & Electronic

Liquidus Projection and Isothermal Section of the Ag-In-Zn Ternary System

Jui-Shen Chang et al.

JOURNAL OF ELECTRONIC MATERIALS (2015)

Add to Collection

Article Engineering, Electrical & Electronic

Geometry effect on mechanical performance and fracture behavior of micro-scale ball grid array structure Cu/Sn-3.0Ag-0.5Cu/Cu solder joints

H. B. Qin et al.

MICROELECTRONICS RELIABILITY (2015)

Add to Collection

Article Engineering, Electrical & Electronic

Drop Impact Reliability Analysis of 3-D Chip-on-Chip Packaging: Numerical Modeling and Experimental Validation

Hsien-Chie Cheng et al.

IEEE TRANSACTIONS ON DEVICE AND MATERIALS RELIABILITY (2014)

Add to Collection

Article Mechanics

CHAIN LENGTH EFFECT ON SURFACE STRESS OF ALKANETHIOLATES ADSORBED ONTO √3x√3R30° AU(111) SURFACE: A VAN DER WAALS DENSITY FUNCTIONAL STUDY

Y. -C. Shih et al.

JOURNAL OF MECHANICS (2014)

Add to Collection

Article Materials Science, Multidisciplinary

Electronic and bonding analysis of hardness in pyrite-type transition-metal pernitrides

Z. T. Y. Liu et al.

PHYSICAL REVIEW B (2014)

Add to Collection

Article Engineering, Manufacturing

Thermal Cycling Reliability Study of Ag-In Joints Between Si Chips and Cu Substrates Made by Fluxless Processes

Yuan-Yun Wu et al.

IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY (2014)

Add to Collection

Article Materials Science, Multidisciplinary

Microscopic theory of hardness and design of novel superhard crystals

Yongjun Tian et al.

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2012)

Add to Collection

Article Materials Science, Multidisciplinary

Physical properties of thermoelectric zinc antimonide using first-principles calculations

Philippe Jund et al.

PHYSICAL REVIEW B (2012)

Add to Collection

Article Chemistry, Physical

Modeling hardness of polycrystalline materials and bulk metallic glasses

Xing-Qiu Chen et al.

INTERMETALLICS (2011)

Add to Collection

Article Materials Science, Multidisciplinary

Electronic structure of Ag5Zn8, Ag9In4 and Mn3In gamma-brasses studied by FLAPW band calculations

M. Inukai et al.

PHILOSOPHICAL MAGAZINE (2011)

Add to Collection

Article Engineering, Manufacturing

Fluxless Bonding of Bismuth Telluride Chips to Alumina Using Ag-In System for High Temperature Thermoelectric Devices

Wen P. Lin et al.

IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY (2011)

Add to Collection

Article Computer Science, Interdisciplinary Applications

ElAM: A computer program for the analysis and representation of anisotropic elastic properties

Arnaud Marmier et al.

COMPUTER PHYSICS COMMUNICATIONS (2010)

Add to Collection

Article Engineering, Manufacturing

Silver Microstructure Control for Fluxless Bonding Success Using Ag-In System

Pin J. Wang et al.

IEEE TRANSACTIONS ON COMPONENTS AND PACKAGING TECHNOLOGIES (2010)

Add to Collection

Article Materials Science, Multidisciplinary

A Review on Die Attach Materials for SiC-Based High-Temperature Power Devices

Hui Shun Chin et al.

METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2010)

Add to Collection

Article Physics, Multidisciplinary

Universal elastic anisotropy index

Shivakumar I. Ranganathan et al.

PHYSICAL REVIEW LETTERS (2008)

Add to Collection

Article Physics, Condensed Matter

First-principles simulation: ideas, illustrations and the CASTEP code

MD Segall et al.

JOURNAL OF PHYSICS-CONDENSED MATTER (2002)

Add to Collection

Review Physics, Multidisciplinary

Phonons and related crystal properties from density-functional perturbation theory

S Baroni et al.

REVIEWS OF MODERN PHYSICS (2001)

Add to Collection

© Peeref 2019-2024. All rights reserved.