4.5 Article

Biomechanical Regenerative Braking Energy Harvester: A Systematic Analysis

Related references

Note: Only part of the references are listed.
Article Engineering, Biomedical

Early evaluation of a powered transfemoral prosthesis with force-modulated impedance control and energy regeneration

Holly Warner et al.

Summary: The study aims to develop a novel active prosthesis integrating impedance controller design with energy regeneration. The controller achieves simplification of tuning parameters and injection of negative damping, showing good adaptability to changes in walking speed.

MEDICAL ENGINEERING & PHYSICS (2022)

Article Automation & Control Systems

Generating Electricity During Locomotion Modes Dominated by Negative Work via a Knee Energy-Harvesting Exoskeleton

Xinyu Wu et al.

Summary: This study developed a knee energy-harvesting exoskeleton that can generate electricity from human motion during level walking, downhill walking, and stair descent without sensors. The bi-directional knee motion is transformed into the unidirectional rotation of the generator through proper gear train. The exoskeleton can generate substantial and sustainable electricity with little extra effort.

IEEE-ASME TRANSACTIONS ON MECHATRONICS (2022)

Article Robotics

Sample-efficient gear-ratio optimization for biomechanical energy harvester

Taisuke Kobayashi et al.

Summary: This paper focuses on a framework for data-driven optimization of gear ratio in a CVT-equipped biomechanical energy harvester, which employs multi-task Bayesian optimization to reuse optimization results of similar tasks. The proposed framework can achieve the optimal gear ratio for each task around 50% faster than random search, taking only around 20 minutes. Experimental results also suggest that optimization can be accelerated by exploiting similarities with previously optimized tasks.

INTERNATIONAL JOURNAL OF INTELLIGENT ROBOTICS AND APPLICATIONS (2022)

Article Thermodynamics

Harvesting the negative work of an active exoskeleton robot to extend its operating duration

Limin Ren et al.

Summary: This research proposes a working mode for exoskeleton robots to harvest negative energy for extended operation, and introduces an energy harvesting module that is efficient and reliable in reducing battery consumption and improving power density.

ENERGY CONVERSION AND MANAGEMENT (2021)

Article Multidisciplinary Sciences

High-performance wearable thermoelectric generator with self-healing, recycling, and Lego-like reconfiguring capabilities

Wei Ren et al.

Summary: The wearable TEG achieves high open-circuit voltage and flexibility, and greatly improves performance through integrating wavelength-selective metamaterial film, paving the way for the next generation of energy-harvesting devices.

SCIENCE ADVANCES (2021)

Article Chemistry, Physical

A flexible spring-shaped architecture with optimized thermal design for wearable thermoelectric energy harvesting

Haicai Lv et al.

Summary: A novel three-dimensional spring-like thermoelectric device (S-TED) is proposed, which inherits excellent flexibility, compressibility, and the ability to utilize waste heat under vertical temperature gradient. Compared to conventional TEDs, this device is optimized in contact enhancement, thermal insulation design, and heat dissipation efficiency, achieving high output power.

NANO ENERGY (2021)

Article Multidisciplinary Sciences

Removing energy with an exoskeleton reduces the metabolic cost of walking

Michael Shepertycky et al.

Summary: Evolutionary pressures have shaped human walking patterns to be highly energy-efficient, posing challenges for exoskeletons to reduce metabolic costs. However, some exoskeletons have successfully reduced metabolic expenditure by strategically removing kinetic energy during the gait cycle and converting it into electrical power. Timing and magnitude of energy removal are critical factors for effective metabolic cost reduction, as demonstrated through comparison of different loading profiles.

SCIENCE (2021)

Article Instruments & Instrumentation

A lightweight wearable biomechanical energy harvester

Mingyi Liu et al.

Summary: This paper presents a lightweight device that generates electricity by harvesting energy from the negative muscle work of the human ankle, without interfering with natural motion. The device engages and disengages using a simple but effective passive mechanism design and can produce electric power during the terminal stance phase.

SMART MATERIALS AND STRUCTURES (2021)

Article Instruments & Instrumentation

Knee energy harvester with variable transmission to reduce the effect on the walking gait

Hugo Hung-Tin Chan et al.

Summary: A lightweight human knee energy harvester has been developed to capture energy from knee motion, employing a variable radius drum-cable mechanism to reduce its impact on gait. Experimental results show minimal changes in users' walking gait when using the harvester, with no statistically significant difference in metabolic cost compared to normal walking.

SMART MATERIALS AND STRUCTURES (2021)

Article Engineering, Biomedical

Simulation of Stand-to-Sit Biomechanics for Robotic Exoskeletons and Prostheses With Energy Regeneration

Brokoslaw Laschowski et al.

Summary: Robotic exoskeletons and prostheses have been mainly studied for level-ground walking, but this research focused on the biomechanical energy available for electrical regeneration during stand-to-sit movements. The hip absorbed the largest peak negative mechanical power during these movements, followed by the knee and ankle joints. With assumed regenerative actuator efficiencies, similar amounts of electrical energy could be regenerated while sitting down compared to walking.

IEEE TRANSACTIONS ON MEDICAL ROBOTICS AND BIONICS (2021)

Article Instruments & Instrumentation

Scavenging vibrational energy with a novel bistable electromagnetic energy harvester

Bo Yan et al.

SMART MATERIALS AND STRUCTURES (2020)

Article Chemistry, Multidisciplinary

Stretchable Nanolayered Thermoelectric Energy Harvester on Complex and Dynamic Surfaces

Yang Yang et al.

NANO LETTERS (2020)

Article Automation & Control Systems

Quasi-Direct Drive Actuation for a Lightweight Hip Exoskeleton With High Backdrivability and High Bandwidth

Shuangyue Yu et al.

IEEE-ASME TRANSACTIONS ON MECHATRONICS (2020)

Article Chemistry, Physical

Wearable triboelectric nanogenerators for biomechanical energy harvesting

Yongjiu Zou et al.

NANO ENERGY (2020)

Review Chemistry, Physical

Wearable self-powered biosensors

Russell C. Reid et al.

CURRENT OPINION IN ELECTROCHEMISTRY (2020)

Article Engineering, Mechanical

Knee-braced energy harvester: Reclaim energy and assist walking

Longhan Xie et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2019)

Review Green & Sustainable Science & Technology

A Review of Human-Powered Energy Harvesting for Smart Electronics: Recent Progress and Challenges

Salman Khalid et al.

INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY (2019)

Article Thermodynamics

A lightweight biomechanical energy harvester with high power density and low metabolic cost

Jun Fan et al.

ENERGY CONVERSION AND MANAGEMENT (2019)

Article Automation & Control Systems

An Unpowered Flexible Lower Limb Exoskeleton: Walking Assisting and Energy Harvesting

Longhan Xie et al.

IEEE-ASME TRANSACTIONS ON MECHATRONICS (2019)

Article Instruments & Instrumentation

A smart harvester for capturing energy from human ankle dorsiflexion with reduced user effort

Mingjing Cai et al.

SMART MATERIALS AND STRUCTURES (2019)

Article Biophysics

Muscle Function and Coordination of Stair Ascent

Nicole G. Harper et al.

JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME (2018)

Article Biochemical Research Methods

OpenSim: Simulating musculoskeletal dynamics and neuromuscular control to study human and animal movement

Ajay Seth et al.

PLOS COMPUTATIONAL BIOLOGY (2018)

Review Robotics

An Overview on Principles for Energy Efficient Robot Locomotion

Navvab Kashiri et al.

FRONTIERS IN ROBOTICS AND AI (2018)

Review Energy & Fuels

Wearable Biomechanical Energy Harvesting Technologies

Young-Man Choi et al.

ENERGIES (2017)

Article Instruments & Instrumentation

A knee-mounted biomechanical energy harvester with enhanced efficiency and safety

Chao Chen et al.

SMART MATERIALS AND STRUCTURES (2017)

Article Physics, Applied

An energy harvesting bracelet

Zhiyi Wu et al.

APPLIED PHYSICS LETTERS (2017)

Article Engineering, Biomedical

Myoelectric Control for Adaptable Biomechanical Energy Harvesting

Jessica C. Selinger et al.

IEEE TRANSACTIONS ON NEURAL SYSTEMS AND REHABILITATION ENGINEERING (2016)

Article Biophysics

The functional roles of muscles during sloped walking

Nathaniel T. Pickle et al.

JOURNAL OF BIOMECHANICS (2016)

Article Engineering, Biomedical

Lower Limb-Driven Energy Harvester: Modeling, Design, and Performance Evaluation

Jean-Paul Martin et al.

JOURNAL OF MEDICAL DEVICES-TRANSACTIONS OF THE ASME (2016)

Article Engineering, Electrical & Electronic

Digitally Controlled Energy Harvesting Power Management System

Andrew Jordan Dickson et al.

IEEE JOURNAL OF EMERGING AND SELECTED TOPICS IN POWER ELECTRONICS (2016)

Article Engineering, Electrical & Electronic

Biomechanical Energy Harvesting System With Optimal Cost-of-Harvesting Tracking Algorithm

Alon Cervera et al.

IEEE JOURNAL OF EMERGING AND SELECTED TOPICS IN POWER ELECTRONICS (2016)

Article Automation & Control Systems

Design Principles for Energy-Efficient Legged Locomotion and Implementation on the MIT Cheetah Robot

Sangok Seok et al.

IEEE-ASME TRANSACTIONS ON MECHATRONICS (2015)

Article Biophysics

Is My Model Good Enough? Best Practices for Verification and Validation of Musculoskeletal Models and Simulations of Movement

Jennifer L. Hicks et al.

JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME (2015)

Article Multidisciplinary Sciences

Reducing the energy cost of human walking using an unpowered exoskeleton

Steven H. Collins et al.

NATURE (2015)

Article Engineering, Industrial

Metabolic rate of carrying added mass: A function of walking speed, carried mass and mass location

Eliran Schertzer et al.

APPLIED ERGONOMICS (2014)

Review Computer Science, Information Systems

A Vision of IoT: Applications, Challenges, and Opportunities With China Perspective

Shanzhi Chen et al.

IEEE INTERNET OF THINGS JOURNAL (2014)

Article Neurosciences

The effects of grade and speed on leg muscle activations during walking

Jason R. Franz et al.

GAIT & POSTURE (2012)

Article Engineering, Biomedical

Biomechanical energy harvesting from human motion: theory, state of the art, design guidelines, and future directions

Raziel Riemer et al.

JOURNAL OF NEUROENGINEERING AND REHABILITATION (2011)

Article Multidisciplinary Sciences

Recycling Energy to Restore Impaired Ankle Function during Human Walking

Steven H. Collins et al.

PLOS ONE (2010)

Article Engineering, Biomedical

An Active Foot-Ankle Prosthesis With Biomechanical Energy Regeneration

Joseph K. Hitt et al.

JOURNAL OF MEDICAL DEVICES-TRANSACTIONS OF THE ASME (2010)

Review Ergonomics

A Review of Technology of Personal Heating Garments

Faming Wang et al.

INTERNATIONAL JOURNAL OF OCCUPATIONAL SAFETY AND ERGONOMICS (2010)

Article Automation & Control Systems

Preliminary Evaluations of a Self-Contained Anthropomorphic Transfemoral Prosthesis

Frank Sup et al.

IEEE-ASME TRANSACTIONS ON MECHATRONICS (2009)

Article Engineering, Biomedical

Development of a biomechanical energy harvester

Qingguo Li et al.

JOURNAL OF NEUROENGINEERING AND REHABILITATION (2009)