☆ 4.6 Review

3D Printing as a Disruptive Technology for the Circular Economy of Plastic Components of End-of-Life Vehicles: A Systematic Review

SUSTAINABILITY (2022)

Related references

Note: Only part of the references are listed.

Article Environmental Sciences

Prioritizing requirements for implementing blockchain technology in construction supply chain based on circular economy: Fuzzy Ordinal Priority Approach

M. Sadeghi et al.

Summary: The synergy between blockchain technology and circular economy can achieve sustainable development in terms of economy, environment, and society. Prioritized requirements for implementing blockchain in the construction supply chain were determined using the Fuzzy Ordinal Priority Approach (Fuzzy OPA). The results emphasize the importance of developing circular economy attributes, considering intra-organizational factors, and meeting technological requirements and collaboration infrastructure.

INTERNATIONAL JOURNAL OF ENVIRONMENTAL SCIENCE AND TECHNOLOGY (2023)

Add to Collection

Article Business

Circular economy practices and industry 4.0 technologies: A strategic move of automobile industry

Zhang Yu et al.

Summary: This study examines the impact of Industry 4.0 on circular economy practices and supply chain capability on firm performance. The results show that circular economy practices have a positive impact on economic and operational performance, and Industry 4.0 can improve business operations. Additionally, supply chain capability is positively related to operational performance, which, in turn, can enhance economic health.

BUSINESS STRATEGY AND THE ENVIRONMENT (2022)

Add to Collection

Review Business

Linking circular economy and digitalisation technologies: A systematic literature review of past achievements and future promises

Chetna Chauhan et al.

Summary: In recent years, there has been a significant increase in academic research in the fields of circular economy and digital technologies, with digital technologies such as IoT and AI playing crucial roles in implementing circular economy. Studies have shown that the digitalization-driven transition towards circular economy faces various barriers, including policy-related issues, lack of predictability, psychological issues, and information vulnerability.

TECHNOLOGICAL FORECASTING AND SOCIAL CHANGE (2022)

Add to Collection

Article Green & Sustainable Science & Technology

Leveraging Blockchain and Smart Contract Technologies to Overcome Circular Economy Implementation Challenges

Nallapaneni Manoj Kumar et al.

Summary: Adopting a circular economy has become a popular approach for promoting sustainable development, but there are many challenges to its implementation. Information and Communication Technologies (ICT) have been proposed as solutions, but their practicality in the context of circular economy is questioned. This paper reviews the challenges and investigates the limitations of ICT solutions. Blockchain and smart contract technologies show promise but also have limitations. The study highlights the potential of a circular economy blockchain for improving trust and transparency in supply chains and governance.

SUSTAINABILITY (2022)

Add to Collection

Article Construction & Building Technology

Applications of Industry 4.0 digital technologies towards a construction circular economy: gap analysis and conceptual framework

Faris Elghaish et al.

Summary: This paper investigates the emerging relationship between Industry 4.0 digital technologies and the construction industry's transition into a circular economy system. It develops a conceptual framework to integrate IoT, blockchain, and AI into asset operation, aiming to guide future practical research applications.

CONSTRUCTION INNOVATION-ENGLAND (2022)

Add to Collection

Article Construction & Building Technology

Disruptive technologies for a circular building industry

Foteini Setaki et al.

Summary: This paper focuses on the intersection of the circular economy, the building industry, and disruptive technological innovations. It analyzes how disruptive, often digital, technologies can enable a circular economy in the building industry, particularly in the construction and demolition phases.

BUILDING AND ENVIRONMENT (2022)

Add to Collection

Article Environmental Sciences

Leveraging blockchain concepts as watermarkers of plastics for sustainable waste management in progressing circular economy

Kesaven Bhubalan et al.

Summary: Blockchain-integrated waste management and circular economy can support green principles by providing transparency, reliability, and automation. Redesigning plastics with molecular tagging can ensure infinite plastic loop and closed-loop recycling. Government policies and corporate involvement are crucial for promoting circular plastic economy, but a systematic approach is needed to address blockchain technology and plastic redesigning.

ENVIRONMENTAL RESEARCH (2022)

Add to Collection

Review Automation & Control Systems

Fused deposition modelling approach using 3D printing and recycled industrial materials for a sustainable environment: a review

Nithar Ranjan Madhu et al.

Summary: According to research findings, up to 90% of household items may be made of plastic, but only a small portion of plastic waste is currently recycled. Plastic recycling is a major concern for environmentalists and waste management professionals, requiring innovative processing methods. 3D printing, as a rapidly expanding industry, offers a solution by using recyclable plastics for production, aiming to reduce pollution and plastic supply.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2022)

Add to Collection

Article Green & Sustainable Science & Technology

Technological Revolution and Circular Economy Practices: A Mechanism of Green Economy

Syed Abdul Rehman Khan et al.

Summary: Industry 4.0 technologies significantly enhance circular economy practices, circular economy practices are positively related to environmental and operational performance, and improved economic and operational performance boost organizational performance.

SUSTAINABILITY (2022)

Add to Collection

Article Green & Sustainable Science & Technology

Circular economy framework for automobiles: Closing energy and material loops

Laura C. Aguilar Esteva et al.

Summary: Corporations, including automotive manufacturers, are increasingly exploring extended circular economy strategies to enhance sustainability. A comprehensive circular economy framework for the automotive industry is currently lacking, but research shows that electric vehicles use higher proportions of renewable energy and recycled materials, which can significantly reduce environmental impacts.

JOURNAL OF INDUSTRIAL ECOLOGY (2021)

Add to Collection

Article Environmental Sciences

Life cycle environmental impacts of chemical recycling via pyrolysis of mixed plastic waste in comparison with mechanical recycling and energy recovery

Harish Jeswani et al.

Summary: The study compares the environmental impacts of chemical recycling through pyrolysis with other plastics waste management options and virgin plastics production. Results indicate that pyrolysis has lower climate change impact and life cycle energy use, but higher other impacts compared to mechanical recycling, energy recovery, and virgin plastics production.

SCIENCE OF THE TOTAL ENVIRONMENT (2021)

Add to Collection

Article Polymer Science

Optimization of Process Parameters for Fabricating Polylactic Acid Filaments Using Design of Experiments Approach

Chil-Chyuan Kuo et al.

Summary: This study investigated the feasibility of recycling PLA waste plastic and re-extruding it into new PLA filaments. It was found that it was possible to fabricate PLA filament using recycled PLA waste plastic at a production cost that is only 60% of the commercially available PLA filament. The tensile strength of the developed PLA filament is approximately 1.1 times that of the commercially available PLA filament, and the optimal process parameters for fabricating PLA filament were determined through a design of experiments approach.

POLYMERS (2021)

Add to Collection

Review Green & Sustainable Science & Technology

A Systematic Literature Review on Additive Manufacturing in the Context of Circular Economy

Stavros Ponis et al.

Summary: Additive Manufacturing is considered one of the most promising and disruptive technologies of the Industry 4.0 era, with the potential to transform traditional manufacturing paradigms and promote sustainable and circular business models. This paper aims to contribute to the scientific field at the intersection of AM and Circular Economy by classifying existing research, proposing typologies, and identifying research gaps and areas for future studies.

SUSTAINABILITY (2021)

Add to Collection

Article Engineering, Environmental

Closed loop supply chain network for local and distributed plastic recycling for 3D printing: a MILP-based optimization approach

Pavlo Santander et al.

RESOURCES CONSERVATION AND RECYCLING (2020)

Add to Collection

Review Green & Sustainable Science & Technology

Plastic recycling in additive manufacturing: A systematic literature review and opportunities for the circular economy

Fabio A. Cruz Sanchez et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Add to Collection

Article Engineering, Environmental

3D printing goes greener: Study of the properties of post-consumer recycled polymers for the manufacturing of engineering components

Ana C. Pinho et al.

WASTE MANAGEMENT (2020)

Add to Collection

Article Business

Recycling of end-of-life vehicles: Assessing trends and performances in Europe

Idiano D'Adamo et al.

TECHNOLOGICAL FORECASTING AND SOCIAL CHANGE (2020)

Add to Collection

Article Engineering, Civil

Optimizing Transportation Network of Recovering End-of-Life Vehicles by Compromising Program in Polymorphic Uncertain Environment

Jing Zhang et al.

JOURNAL OF ADVANCED TRANSPORTATION (2019)

Add to Collection

Article Chemistry, Physical

Mechanical Properties and Applications of Recycled Polycarbonate Particle Material Extrusion-Based Additive Manufacturing

Matthew J. Reich et al.

MATERIALS (2019)

Add to Collection

Article Green & Sustainable Science & Technology

Exploring the potential of additive manufacturing for product design in a circular economy

Marita Sauerwein et al.

JOURNAL OF CLEANER PRODUCTION (2019)

Add to Collection

Article Engineering, Mechanical

Secondary use of ABS co-polymer recyclates for the manufacture of structural elements using the FFF technology

Piotr Czyzewski et al.

RAPID PROTOTYPING JOURNAL (2018)

Add to Collection

Article Business

Circular Economy, 3D Printing, and the Biosphere Rules

Gregory Unruh

CALIFORNIA MANAGEMENT REVIEW (2018)

Add to Collection

Article Business

Disruptive Technology as an Enabler of the Circular Economy: WHAT POTENTIAL DOES 3D PRINTING HOLD?

Alysia Garmulewicz et al.

CALIFORNIA MANAGEMENT REVIEW (2018)

Add to Collection

Article Chemistry, Physical

Developments of electric cars and fuel cell hydrogen electric cars

Tabbi Wilberforce et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)

Add to Collection

Article Green & Sustainable Science & Technology

Recycling and remanufacturing of 3D printed continuous carbon fiber reinforced PLA composites

Xiaoyong Tian et al.

JOURNAL OF CLEANER PRODUCTION (2017)

Add to Collection

Review Green & Sustainable Science & Technology

The Circular Economy A new sustainability paradigm?

Martin Geissdoerfer et al.

JOURNAL OF CLEANER PRODUCTION (2017)

Add to Collection

Proceedings Paper Automation & Control Systems

The role of additive manufacturing in the era of Industry 4.0

Ugur M. Dilberoglu et al.

27TH INTERNATIONAL CONFERENCE ON FLEXIBLE AUTOMATION AND INTELLIGENT MANUFACTURING, FAIM2017 (2017)

Add to Collection

Review Green & Sustainable Science & Technology

Towards circular economy implementation: a comprehensive review in context of manufacturing industry

Michael Lieder et al.

JOURNAL OF CLEANER PRODUCTION (2016)

Add to Collection

Editorial Material Multidisciplinary Sciences

Circular economy

Walter R. Stahel

NATURE (2016)

Add to Collection

Article Engineering, Mechanical

Biomimetic additive manufactured polymer composites for improved impact resistance

Grace X. Gu et al.

EXTREME MECHANICS LETTERS (2016)

Add to Collection

Article Law

3D Printing, Intellectual Property and Innovation Policy

Stefan Bechtold

IIC-INTERNATIONAL REVIEW OF INTELLECTUAL PROPERTY AND COMPETITION LAW (2016)

Add to Collection

Article Green & Sustainable Science & Technology

Life cycle analysis of distributed recycling of post-consumer high density polyethylene for 3-D printing filament

M. A. Kreiger et al.

JOURNAL OF CLEANER PRODUCTION (2014)

Add to Collection

Article Materials Science, Multidisciplinary

Materials challenges and opportunities for enhancing the sustainability of automobiles

Gregory A. Keoleian et al.

MRS BULLETIN (2012)

Add to Collection

Review Polymer Science

Processing technologies for poly(lactic acid)

L-T Lim et al.

PROGRESS IN POLYMER SCIENCE (2008)

Add to Collection

Article Social Issues

Urbanization in developing countries: Current trends, future projections, and key challenges for sustainability

Barney Cohen

TECHNOLOGY IN SOCIETY (2006)

Add to Collection

Article Materials Science, Multidisciplinary

End-of-life vehicle recycling in the European Union

N Kanari et al.

JOM-JOURNAL OF THE MINERALS METALS & MATERIALS SOCIETY (2003)

Add to Collection

© Peeref 2019-2024. All rights reserved.