A laser-scribed wearable strain sensing system powered by an integrated rechargeable thin-film zinc-air battery for a long-time continuous healthcare monitoring

Wearable sensors with long cruising times without the need for an external wire-connected power supply are urgently required for a continuous physiological signal monitoring. Herein, we report the design and fabrication of a wearable all-in-one sensing system that integrates a sensitive strain sensor and a rechargeable zinc-air battery on the same laser-induced graphene (LIG) platform. The sensing electrode of the strain sensor, the catalytic air electrode of the zinc-air battery and the interconnection lines between the two are simultaneously fabricated through the same laser-scribing process on polyimide (PI) followed by pattern transfer to a flexible and stretchable polydimethylsiloxane (PDMS) substrate. In the sensor, the conductive porous LIG exhibits a high gauge factor (similar to 2710.95), a wide detection range (similar to 40%), and a well cyclic loading-unloading stability (>20,000 cycles). In the zinc-air battery, Co3O4 nanoparticles are in-situ laser-sintered on LIG to form an excellent electrode/electrolyte/air three-phased interfacing structure for a high catalytic performance, and a moisturized tetraethyl ammonium hydroxide (TEAOH)-KOH/polyvinyl alcohol (PVA) gel electrolyte tightly binds the Co3O4/LIG air electrode and zinc foil electrode together into an integrate thin-film energy device, which provides a high open-circuit voltage (similar to 1.39 V) and a high specific capacity (712 mAh g(-1) at 0.2 mA cm(-2)). For a proof-of-concept, an intelligent wristband based on the sensing system was fabricated and worn on the wearer's wrist for a long-time continuous pulse monitoring of up to 10 h. The health state of the wearer can be depicted upon the acquired pulse waveforms. The developed LIG-based sensing system with a high internal powering capability will be promising in wearable sensing applications.

Automated summary

In this study, a wearable all-in-one sensing system that integrates a sensitive strain sensor and a rechargeable zinc-air battery was designed and fabricated. The system demonstrated high gauge factor and internal powering capability, and showed potential for continuous pulse monitoring.