☆ 4.7 Article

Increase the Surface PANI Occupancy of Electrospun PMMA/PANI Fibers: Effect of the Electrospinning Parameters on Surface Segregation

POLYMERS (2022)

Related references

Note: Only part of the references are listed.

Article Chemistry, Multidisciplinary

Highly Crosslinked Conductive Polymer Nanofibrous Films for High-Rate Solid-State Supercapacitors and Electromagnetic Interference Shielding

Haoran Lai et al.

Summary: With their low cost and unique physicochemical properties, conductive polymer-based film electrodes have gained attention in flexible electronic devices. However, their limited intrinsic conductivity hinders their use in high-rate supercapacitors and high electromagnetic interference (EMI) shielding. This study explores the rational design of film nanostructures to address this issue. The use of specially treated PEDOT:PSS coated PAN nanofibrous films as current collectors, along with highly crosslinked conductive nanofibrous films (HCC-NFs) based on polyaniline (PANI) or polypyrrole (PPy), results in PANI@PPNF and PPy@PPNF electrodes. PANI@PPNF electrodes exhibit a specific capacitance of 156 mF cm(-2) and retain 41% capacity (64 mF cm(-2)) even at 20 mA cm(-2). Additionally, PANI@PPNFs demonstrate excellent rate performance and cycle stability, as well as high EMI shielding performance. This conductive polymer-based HCC-NF structure provides a promising platform for designing multi-functional flexible electronic devices.

ADVANCED MATERIALS INTERFACES (2022)

Add to Collection

Article Polymer Science

Pilot-Scale Electrospinning of PLA Using Biobased Dyes as Multifunctional Additives

Naveen Kumar Balakrishnan et al.

Summary: Fibers with diameters in the lower micrometer range have unique properties suitable for textile and biomedical applications. This study explored the use of biobased dyes as additives to improve the spinnability of polylactic acid (PLA) in melt electrospinning. The addition of dyes resulted in narrower fibers and antibacterial activity, providing the basis for environmentally friendly pilot-scale manufacturing of microfibers.

POLYMERS (2022)

Add to Collection

Article Chemistry, Analytical

Enhanced NH3 sensing performance of polyaniline via a facile morphology modification strategy

Xiaohui Duan et al.

Summary: By using an in-situ polymerization method, PANI/halloysite nanotubes (PANI/HNTs) composite was prepared and exhibited better NH3 gas sensing performance compared to pure PANI material due to the unique hollow structure and larger specific surface area of HNTs.

SENSORS AND ACTUATORS B-CHEMICAL (2022)

Add to Collection

Review Polymer Science

Electrospun PVDF Nanofibers for Piezoelectric Applications: A Review of the Influence of Electrospinning Parameters on the β Phase and Crystallinity Enhancement

Zhongchen He et al.

Summary: PVDF as a piezoelectric polymer shows excellent properties and has various forms of applications, especially in the field of nanofibers. Electrospinning is an efficient technique for producing PVDF nanofibers with high beta phase fraction and crystallinity.

POLYMERS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Coloration and Chromatic Sensing Behavior of Electrospun Cellulose Fibers with Curcumin

Minhee Kim et al.

Summary: The effective method of coloration and chromatic sensing of electrospun cellulose fabrics using curcumin as a natural colorant was demonstrated. The high surface area and rough surface morphology of the fibers led to better coloration compared to cotton fibers. The cellulose fibers showed higher and quicker responsiveness to toxic gases due to trapping of dye molecules during deacetylation process.

NANOMATERIALS (2021)

Add to Collection

Article Engineering, Chemical

Fluorine-free and hydrophobic/oleophilic PMMA/PDMS electrospun nanofibrous membranes for gravity-driven removal of water from oil-rich emulsions

Yi-Ting Tsai et al.

Summary: This study investigated the use of highly porous nanofibrous membranes prepared through electrospinning of PMMA/PDMS for gravity-driven separation of oil-rich emulsions. The composite membranes showed high separation efficiency for various oil-rich emulsions, making them a promising material for effective and fast gravity-driven filtration.

SEPARATION AND PURIFICATION TECHNOLOGY (2021)

Add to Collection

Article Materials Science, Characterization & Testing

Effect of electrospinning parameters on the mechanical and morphological characteristics of small diameter PCL tissue engineered blood vessel scaffolds having distinct micro and nano fibre populations - A DOE approach

R. A. O'Connor et al.

Summary: The electrospun tubular poly (epsilon-caprolactone) (PCL) scaffolds have shown promise in tissue engineered blood vessel research. Mechanical properties can be varied by adjusting processing conditions, with rotating collector system speed playing a key role. Fiber orientation and diameter also influence scaffold attributes.

POLYMER TESTING (2021)

Add to Collection

Review Materials Science, Multidisciplinary

Electrospun Nanofibers: Materials, Synthesis Parameters, and Their Role in Sensing Applications

Saraswathi Kailasa et al.

Summary: Electrospinning has gained increasing attention in the scientific research community, industries, and various applications over the past decade. This review paper provides an overview of electrospinning, its history, factors affecting electrospun nanofibers, and their applications in sensing, biomedical fields, water treatment, energy harvesting, and storage. Additionally, challenges, opportunities, and future directions for electrospun nanofibers are discussed.

MACROMOLECULAR MATERIALS AND ENGINEERING (2021)

Add to Collection

Article Chemistry, Analytical

Electrospun PAN/PANI fiber film with abundant active sites for ultrasensitive trimethylamine detection

Chen Qu et al.

Summary: Trimethylamine (TMA) is a malodorous substance that can cause odor nuisance to residents even at low concentrations. This study designed PAN/PANI fibers with abundant active sites by increasing the saturation difference between PAN and PANI in the precursor solution, resulting in a sensor with ultrahigh sensitivity and excellent repeatability to TMA. Scanning electron microscopy (SEM), Fourier transform infrared (FTIR), and Raman spectroscopy were used to analyze the effects of increasing PANI content on the fiber morphology and the proportion of PANI molecules on the fiber surface. The results showed that increasing saturation difference is an effective method for improving the sensing performance of electrospun conductive polymer fibers.

SENSORS AND ACTUATORS B-CHEMICAL (2021)

Add to Collection

Article Polymer Science

Effect of Relative Humidity on the Electrospinning Performance of Regenerated Silk Solution

Bo Kyung Park et al.

Summary: The study found that as the relative humidity increased, the electrospinning rate of silk solution and the fiber diameter of the silk web decreased, leading to the formation of beads. FTIR results showed that the electrospun silk web was partially beta-sheet crystallized, and the relative humidity did not affect the molecular conformation of silk.

POLYMERS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Effects of Electrospinning Parameters on the Microstructure of PVP/TiO2 Nanofibers

Wan-Tae Kim et al.

Summary: TiO2 has excellent properties and is widely used in various fields. This study utilized electrospinning to fabricate PVP/TiO2 nanofibers, where the diameters of the nanofibers were controlled by adjusting different parameters for improving performance.

NANOMATERIALS (2021)

Add to Collection

Article Spectroscopy

Raman spectroscopy of poly (methyl methacrylate) under laser shock and static compression

S. Chaurasia et al.

JOURNAL OF RAMAN SPECTROSCOPY (2020)

Add to Collection

Article Engineering, Chemical

Targeted morphology of copper oxide based electrospun nanofibers

Faisal H. Alshafei et al.

CHEMICAL ENGINEERING SCIENCE (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Electrospinning of Cyclodextrin Nanofibers: The Effect of Process Parameters

Fuat Topuz et al.

JOURNAL OF NANOMATERIALS (2020)

Add to Collection

Review Chemistry, Physical

The impact of relative humidity on electrospun polymer fibers: From structural changes to fiber morphology

Piotr K. Szewczyk et al.

ADVANCES IN COLLOID AND INTERFACE SCIENCE (2020)

Add to Collection

Article Materials Science, Textiles

Highly Sensitive and Reliable Electrospun Polyaniline Nanofiber Based Biosensor as a Robust Platform for COX-2 Enzyme Detections

Ramazan Asmatulu et al.

FIBERS AND POLYMERS (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Approach to Obtain Electrospun Hydrophilic Fibers and Prevent Fiber Necking

Thorsten Fischer et al.

MACROMOLECULAR MATERIALS AND ENGINEERING (2019)

Add to Collection

Article Chemistry, Physical

Role of confinement, molecular connectivity and flexibility in entropic driven surface segregation of polymer-colloid mixtures

Spand Bharat Mehta et al.

SOFT MATTER (2019)

Add to Collection

Review Materials Science, Multidisciplinary

Molecular Interactions in Electrospinning: From Polymer Mixtures to Supramolecular Assemblies

Elena Ewaldz et al.

ACS APPLIED POLYMER MATERIALS (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Heparin-Eluting Electrospun Nanofiber Yarns for Antithrombotic Vascular Sutures

Sooneon Bae et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Add to Collection

Article Polymer Science

Effect of electrospinning processing variables on polyacrylonitrile nanoyarns

Ariana S. Levitt et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2018)

Add to Collection

Article Chemistry, Physical

Green electrospun and crosslinked poly(vinyl alcohol)/poly(acrylic acid) composite membranes for antibacterial effective air filtration

Miaomiao Zhu et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2018)

Add to Collection

Review Polymer Science

Polymer-based composites by electrospinning: Preparation & functionalization with nanocarbons

Jeremy Kong Yoong Lee et al.

PROGRESS IN POLYMER SCIENCE (2018)

Add to Collection

Article Chemistry, Physical

Determining electrospun morphology from the properties of protein-polymer solutions

Hao Zhang et al.

SOFT MATTER (2018)

Add to Collection

Article Chemistry, Physical

Porous PAN micro/nanofiber separators for enhanced lithium-ion battery performance

Niloufar Sabetzadeh et al.

SOLID STATE IONICS (2018)

Add to Collection

Article Chemistry, Physical

Preparation and characterization of nanofibers of polyvinyl alcohol/polyaniline-montmorillonite clay

Dafenes B. R. dos S. Silva et al.

JOURNAL OF MOLECULAR LIQUIDS (2018)

Add to Collection

Article Materials Science, Paper & Wood

Use of electrospinning to directly fabricate three-dimensional nanofiber stacks of cellulose acetate under high relative humidity condition

Miao Cheng et al.

CELLULOSE (2017)

Add to Collection

Article Polymer Science

Surface properties evolution in electrospun polymer blends by segregation of hydrophilic or amphiphilic molecules

Rafael S. Kurusu et al.

EUROPEAN POLYMER JOURNAL (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Influence of Solution Properties and Process Parameters on the Formation and Morphology of YSZ and NiO Ceramic Nanofibers by Electrospinning

Gerard Cadafalch Gazquez et al.

NANOMATERIALS (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Novel Methods of Producing Low-Reflectance Coatings Utilizing Synergistic Effects of Polymer Phase Separation

Spencer L. Giles et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

Add to Collection

Article Chemistry, Physical

Recent trends in electrospinning of polymer nanofibers and their applications in ultra thin layer chromatography

Abdul Moheman et al.

ADVANCES IN COLLOID AND INTERFACE SCIENCE (2016)

Add to Collection

Article Chemistry, Analytical

Highly sensitive NH3 gas sensors based on novel polypyrrole-coated SnO2 nanosheet nanocomposites

Yang Li et al.

SENSORS AND ACTUATORS B-CHEMICAL (2016)

Add to Collection

Article Engineering, Biomedical

DiameterJ: A validated open source nanofiber diameter measurement tool

Nathan A. Hotaling et al.

BIOMATERIALS (2015)

Add to Collection

Article Chemistry, Analytical

Composition-dependent sensing mechanism of electrospun conductive polymer composite nanofibers

Karen Low et al.

SENSORS AND ACTUATORS B-CHEMICAL (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Effect of electrospinning parameters and polymer concentrations on mechanical-to-electrical energy conversion of randomly-oriented electrospun poly(vinylidene fluoride) nanofiber mats

Hao Shao et al.

RSC ADVANCES (2015)

Add to Collection

Article Polymer Science

On the electrospinning of PVDF: influence of the experimental conditions on the nanofiber properties

Erika Simona Cozza et al.

POLYMER INTERNATIONAL (2013)

Add to Collection

Article Chemistry, Physical

Comparison of surface segregation and anticoagulant property in block copolymer blended evaporation and phase inversion membranes

Fen Ran et al.

SURFACE AND INTERFACE ANALYSIS (2012)

Add to Collection

Article Spectroscopy

Evidences of the evolution from solid solution to surface segregation in Ni-doped SnO2 nanoparticles using Raman spectroscopy

F. H. Aragon et al.

JOURNAL OF RAMAN SPECTROSCOPY (2011)

Add to Collection

Article Electrochemistry

Spectroelectrochemistry of two-layered composites of polyaniline and poly (o-aminophenol)

Anwar-ul-Haq Ali Shah et al.

ELECTROCHIMICA ACTA (2008)

Add to Collection

Article Materials Science, Ceramics

Drying kinetics and segregation in a two-component anti-adherent coating studied by photoluminescence and Raman spectroscopies

R. Rodriguez et al.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2008)

Add to Collection

© Peeref 2019-2024. All rights reserved.