☆ 4.7 Article

Effect of Fiber Wrapping on Bending Behavior of Reinforced Concrete Filled Pultruded GFRP Composite Hybrid Beams

POLYMERS (2022)

Related references

Note: Only part of the references are listed.

Article Mechanics

Behaviors of FRP confined rectangular concrete-filled thin-walled steel tubular stub columns using high-strength materials under axial load

Yansheng Du et al.

Summary: This study investigated the axial compressive behavior of FRP confined concrete-filled thin-walled steel tube columns, showing that the confinement of FRP can delay local buckling of steel tubes and increase the restraint strength of core concrete. The design approach, considering the effects of local buckling and FRP confinement, was verified with experimental results and deemed practical for use.

COMPOSITE STRUCTURES (2022)

Add to Collection

Article Mechanics

Effect of load distribution on the behaviour of RC beams strengthened in flexure with near-surface mounted (NSM) FRP

S. S. Zhang et al.

Summary: This study investigates the effect of load distribution on the behavior of NSM FRP-strengthened RC beams, finding that load uniformity significantly impacts beam behavior, with the degree of this effect varying with the bond length of NSM FRP.

COMPOSITE STRUCTURES (2022)

Add to Collection

Article Mechanics

Flexural strengthening of fire-damaged GFRP-reinforced concrete beams using CFRP sheet: Experimental and analytical study

Hamed Jafarzadeh et al.

Summary: This study examined the flexural response of heated beams and found that the use of CFRP sheets improved their flexural capacity. The increase in exposure temperature had a more notable effect on the strengthening performance.

COMPOSITE STRUCTURES (2022)

Add to Collection

Article Mechanics

Dynamic splitting behaviour of ultra-high-performance concrete confined with carbon-fibre-reinforced polymer

Liang Huang et al.

Summary: Fibre-reinforced polymer (FRP) wrapping is effective in enhancing the compressive properties of concrete, but its dynamic splitting performance on ultra-high-performance concrete (UHPC) has not been explored. This study investigates the impact resistance of carbon FRP (CFRP)-confined UHPC under splitting loads and finds that CFRP confinement reduces the strain-rate sensitivity of UHPC. A new model is proposed to predict the splitting tensile strength of CFRP-confined UHPC under impact loading.

COMPOSITE STRUCTURES (2022)

Add to Collection

Article Mechanics

Behavior of square pultruded GFRP tube filled with seawater and sea sand concrete beam

Xiaoyong Zhang et al.

Summary: This study investigates the behavior of square GFRP tube beams filled with seawater and sea sand concrete under four-point bending test. The results show that GFRP tube thickness and sea sand replacement ratio have significant effects on the ultimate capacity and flexural rigidity, while the strengthening core concrete also influences the failure process significantly.

COMPOSITE STRUCTURES (2022)

Add to Collection

Article Polymer Science

Effects of the Pre-Consolidated Materials Manufacturing Method on the Mechanical Properties of Pultruded Thermoplastic Composites

Alexander Vedernikov et al.

Summary: The choice of manufacturing process, raw materials, and process parameters has a significant impact on the quality of pre-consolidated tapes used in thermoplastic pultrusion. This study compared commercially available tapes to inhouse-made tapes, and found that the inhouse-made tapes produced pultruded composites with higher mechanical properties. Differences in the manufacturing methods of pre-consolidated tapes resulted in variations in glass fiber impregnation and mechanical properties.

POLYMERS (2022)

Add to Collection

Article Engineering, Civil

Shear strengthening of reinforced concrete T-beams with anchored and non-anchored CFRP fabrics

Sakir Yazman et al.

Summary: This study investigated the strengthening of shear deficient T-beams with different CFRP configurations. Results showed that the contribution of EBR to shear capacity is significant and depended on anchorage angle and strengthening type. Among all methods, full wrapping CFRP and partial CFRP with a 45-degree anchorage type yielded the most effective results in enhancing shear capacity and stiffness while improving ductility significantly.

STRUCTURES (2022)

Add to Collection

Article Construction & Building Technology

Punching shear strength and deformation for FRP-reinforced concrete slabs without shear reinforcements

A. Deifalla

Summary: This study aims to develop a mechanical model based on the physical punching shear behavior of FRP-reinforced concrete slabs. An extensive experimental database was collected with 189 FRP-reinforced concrete slabs from 37 different studies. A new mechanical model was developed and proposed based on the critical shear crack theory (CSCT) to accurately predict the strength and rotation of FRP-reinforced concrete slabs under punching shear.

CASE STUDIES IN CONSTRUCTION MATERIALS (2022)

Add to Collection

Article Engineering, Civil

Behavior of CFRP-strengthened RC beams with circular web openings in shear zones: Numerical study

Yasin Onuralp Ozkilic et al.

Summary: This study investigates the behavior of reinforced concrete beams with circular openings and the effects of strengthening them with CFRP. Various parameters such as the opening/beam height ratio, concrete compressive strength, stirrup spacing, and CFRP application type were considered in the analysis. The study identifies important parameters that affect the performance of the beams and provides recommendations for CFRP strengthening based on different conditions.

STRUCTURES (2022)

Add to Collection

Article Materials Science, Composites

On-site evaluation of a modified pultrusion process: Fibre spreading and resin injection-based impregnation

M. S. Irfan et al.

Summary: The research focused on demonstrating a modified pultrusion technique at an industrial site using a commercial production machine. By replacing the conventional resin bath with a custom-designed compact impregnation unit, the modified technique was shown to significantly reduce waste resin volume while improving production efficiency.

JOURNAL OF COMPOSITE MATERIALS (2021)

Add to Collection

Article Engineering, Multidisciplinary

Experimental study on shear strengthening of RC beams with basalt FRP strips using different wrapping methods

Ali Saribiyik et al.

Summary: This paper presents experimental and analytical studies on the shear strengthening of reinforced concrete (RC) beams using basalt fiber reinforced polymer (BFRP) composites. The results show that the shear capacity of RC beams strengthened with BFRP composites increased between 43% and 100%, with fully wrapped sheets and fully wrapped strips configurations proving to be the most effective. An appropriate prediction model has been determined for shear strengthening configurations.

ENGINEERING SCIENCE AND TECHNOLOGY-AN INTERNATIONAL JOURNAL-JESTECH (2021)

Add to Collection

Article Engineering, Civil

Experimental and Numerical Investigation of Load Bearing Capacity of Thinned End Precast Purlin Beams and Solution Proposals

Ceyhun Aksoylu et al.

Summary: The construction sector in Turkey started using concrete prefabrication in the late 1960s, especially in industrial buildings. The main disadvantage of prefabricated structures is the damages that occur, especially in the region of hinged connection, particularly after prolonged snowfall. This study conducted numerical and experimental examinations on the behavior of thinned end purlins under vertical loading, providing a foundation for new parametric studies.

TEKNIK DERGI (2021)

Add to Collection

Article Mechanics

Effects of pulling speed on structural performance of L-shaped pultruded profiles

Alexander Vedernikov et al.

Summary: This study analyzed the influence of pulling speed on the structural characteristics of pultruded glass fiber/epoxy-vinyl resin composite profiles. The results showed that an increase in pulling speed led to an increase in spring-in angle, affecting the mechanical properties of the profiles. Profiles produced at different pulling speeds exhibited differences in cracking and mechanical characteristics.

COMPOSITE STRUCTURES (2021)

Add to Collection

Article Engineering, Manufacturing

Shape memory behavior of unidirectional pultruded laminate

Roman Korotkov et al.

Summary: This study investigates the shape memory behavior of epoxy-based pultruded flat laminates reinforced with unidirectional glass fibers, showing the shape fixity and shape recovery ratios for different fiber orientations. The study also analyzed the performance of pultruded composite materials and laid the foundation for further studies on the simulation and optimization of pultrusion processes.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2021)

Add to Collection

Article Engineering, Civil

Experimental, analytical and numerical investigation of pultruded GFRP composite beams infilled with hybrid FRP reinforced concrete

Lokman Gemi et al.

Summary: This paper presents experimental, analytical, and numerical analyses on the behavior of pultruded GFRP composite beams infilled with hybrid fiber reinforced concrete under four-point loading. The study found that the pultruded profile and composite wrapping significantly improved the performance of the beams, with hybrid reinforcements being recommended for all cases. Detailed damage analyses were also provided.

ENGINEERING STRUCTURES (2021)

Add to Collection

Review Polymer Science

Thermoplastic Pultrusion: A Review

Kirill Minchenkov et al.

Summary: This overview examines the use of thermoplastic composites in pultrusion processes in order to analyze the existing gap between thermoset and thermoplastic pultrusions and promote the development of the latter. By investigating the processes, raw materials, and applications of thermoplastic pultrusion, this study aims to identify current issues and propose future research directions for thermoplastic pultrusion.

POLYMERS (2021)

Add to Collection

Article Mechanics

Full moment-deflection response and bond stiffness reduction of RC elements strengthened with prestressed FRP materials

Justas Slaitas et al.

Summary: This paper proposes a contact stiffness reduction factor and a calculation model for predicting the full bending moment-deflection response. The study includes situations where the RC member was strengthened under external load action and prestressing force was applied to the FRP material.

COMPOSITE STRUCTURES (2021)

Add to Collection

Article Construction & Building Technology

Numerical investigation of the parameters influencing the behavior of dapped end prefabricated concrete purlins with and without CFRP strengthening

Yasin Onuralp Ozkilic et al.

Summary: This study conducted a series of numerical modeling using the finite element program ABAQUS to investigate the shear damages of prefabricated concrete purlins (PCPs). The effects of various parameters on the shear capacity of PCPs were studied, and it was found that the most significant parameter is the orientation of carbon fiber reinforced polymers (CFRP).

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Article Construction & Building Technology

Experimental and numerical investigations of steel fiber reinforced concrete dapped-end purlins

Yasin Onuralp Ozkilic et al.

Summary: Dapped-end beams are prone to shear damages under vertical loads, especially if precautions for thinned ends are not considered during design, leading to sudden failures under snow loads. The use of SFRC can significantly increase energy dissipation and shear capacities of beams without changing the geometry and reinforcement, with improvements of approximately 2.58 and 1.53 times, respectively.

JOURNAL OF BUILDING ENGINEERING (2021)

Add to Collection

Article Polymer Science

Modeling Spring-In of L-Shaped Structural Profiles Pultruded at Different Pulling Speeds

Alexander Vedernikov et al.

Summary: This study successfully predicted spring-in phenomena in pultruded composite profiles through a numerical model, finding that increasing pulling speeds lead to higher levels of spring-in. The validated model demonstrated the possibility of maintaining the same level of spring-in at increased pulling speeds by using a post-die cooling tool or reducing the chemical shrinkage of the resin.

POLYMERS (2021)

Add to Collection

Article Mechanics

Modeling of cracking during pultrusion of large-size profiles

Alexander Safonov et al.

COMPOSITE STRUCTURES (2020)

Add to Collection

Article Mechanics

Experimental and Theoretical Investigation on Flexure Performance of Pultruded GFRP Composite Beams with Damage Analyses

Emrah Madenci et al.

COMPOSITE STRUCTURES (2020)

Add to Collection

Article Engineering, Civil

RC frame structures retrofitted by FRP-wrapping: A model for columns under axial loading and cyclic bending

Barbara Ferracuti et al.

ENGINEERING STRUCTURES (2020)

Add to Collection

Article Mechanics

An experimental approach for shear strengthening of RC beams using a proposed technique by embedded through-section FRP sheets

E. Moradi et al.

COMPOSITE STRUCTURES (2020)

Add to Collection

Review Materials Science, Composites

Pultruded materials and structures: A review

Alexander Vedernikov et al.

JOURNAL OF COMPOSITE MATERIALS (2020)

Add to Collection

Article Mechanics

Buckling and free vibration analyses of pultruded GFRP laminated composites: Experimental, numerical and analytical investigations

Emrah Madenci et al.

COMPOSITE STRUCTURES (2020)

Add to Collection

Article Mechanics

Mechanical property evolution and service life prediction of pultruded carbon/glass hybrid rod exposed in harsh oil -well condition

Chenggao Li et al.

COMPOSITE STRUCTURES (2020)

Add to Collection

Review Mechanics

State-of-the-art review of anchored FRP shear-strengthened RC beams: A study of influencing factors

Ahmed Godat et al.

COMPOSITE STRUCTURES (2020)

Add to Collection

Article Mechanics

Flexural behavior of timber beams strengthened with pultruded glass fiber reinforced polymer profiles

Mohammad Shekarchi et al.

COMPOSITE STRUCTURES (2020)

Add to Collection

Article Construction & Building Technology

Durability of pultruded GFRP tubes subjected to seawater sea sand concrete and seawater environments

Milad Bazli et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Add to Collection

Article Construction & Building Technology

Innovative compound-type anchorage system for a large-diameter pultruded carbon/glass hybrid rod for bridge cable

Chenggao Li et al.

MATERIALS AND STRUCTURES (2020)

Add to Collection

Article Mechanics

Experimental analysis of reinforced concrete shear deficient beams with circular web openings strengthened by CFRP composite

Ceyhun Aksoylu et al.

COMPOSITE STRUCTURES (2020)

Add to Collection

Article Thermodynamics

Kinetic parameter estimation and simulation of pultrusion process of an epoxy-glass fiber system

Rita de Cassia Costa Dias et al.

THERMOCHIMICA ACTA (2020)

Add to Collection

Article Engineering, Civil

Nonuniform CFRP Wrapping to Prevent Sudden Failure of FRP Confined Square RC Columns

Anh Duc Mai et al.

JOURNAL OF COMPOSITES FOR CONSTRUCTION (2020)

Add to Collection

Article Mechanics

Web crippling behavior of pultruded GFRP channel sections under transverse bearing load

Chao Wu et al.

COMPOSITE STRUCTURES (2019)

Add to Collection

Article Mechanics

Flexural behavior of basalt fiber-reinforced concrete slab strips reinforced with BFRP and GFRP bars

Karim Attia et al.

COMPOSITE STRUCTURES (2019)

Add to Collection

Article Engineering, Multidisciplinary

The static and dynamic analyses of warping included composite exact conical helix by mixed FEM

Umit N. Aribas et al.

COMPOSITES PART B-ENGINEERING (2019)

Add to Collection

Review Mechanics

Delamination formation, evaluation and suppression during drilling of composite laminates: A review

Daxi Geng et al.

COMPOSITE STRUCTURES (2019)

Add to Collection

Article Mechanics

Effect of thermal cycles on mechanical response of pultruded glass fiber reinforced polymer profiles of different geometries

Armin Jafari et al.

COMPOSITE STRUCTURES (2019)

Add to Collection

Article Mechanics

An improved wrapping scheme of axially loaded fiber-reinforced polymer confined concrete columns

Siqi Lin et al.

COMPOSITE STRUCTURES (2019)

Add to Collection

Article Engineering, Civil

Experimental Study on the Flexural Behaviour of a Novel Concrete Filled Hybrid Beams Reinforced with GFRP and Steel Bars

Ferhat Aydin

KSCE JOURNAL OF CIVIL ENGINEERING (2019)

Add to Collection

Article Mechanics

Experimental investigation of shear capacity and damage analysis of thinned end prefabricated concrete purlins strengthened by CFRP composite

Lokman Gemi et al.

COMPOSITE STRUCTURES (2019)

Add to Collection

Article Mechanics

Experimental and numerical investigation on dynamic properties of thin-walled GFRP buckled columns

G. Boscato et al.

COMPOSITE STRUCTURES (2018)

Add to Collection

Article Mechanics

Experimental study on compressive behavior and failure analysis of composite concrete confined by glass/epoxy ± 55° filament wound pipes

Lokman Gemi et al.

COMPOSITE STRUCTURES (2018)

Add to Collection

Article Mechanics

Flexural moduli and end connection stiffnesses of symmetrically loaded GFRP beams for limit state serviceability design analysis

G. J. Turvey et al.

COMPOSITE STRUCTURES (2018)

Add to Collection

Article Engineering, Multidisciplinary

Experimental fatigue behavior of pultruded glass fibre reinforced polymer composite materials

Priscilla Rocha Vieira et al.

COMPOSITES PART B-ENGINEERING (2018)

Add to Collection

Article Mechanics

Influence of fibre orientation on pultruded GFRP material properties

Shaohua Zhang et al.

COMPOSITE STRUCTURES (2018)

Add to Collection

Article Materials Science, Characterization & Testing

Influence of immersion in water under hydraulic pressure on the interfacial shear strength of a unidirectional carbon/glass hybrid rod

Chenggao Li et al.

POLYMER TESTING (2018)

Add to Collection

Article Materials Science, Composites

Experimental study and numerical simulation on bond between FFRP and CFRC components

Libo Yan et al.

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2017)

Add to Collection

Article Engineering, Mechanical

Static analysis of laminated composite beams based on higher-order shear deformation theory by using mixed-type finite element method

Atilla Ozutok et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2017)

Add to Collection

Article Engineering, Civil

Progressive Damage Analysis of Web Crippling of GFRP Pultruded I-Sections

Francisco Nunes et al.

JOURNAL OF COMPOSITES FOR CONSTRUCTION (2017)

Add to Collection

Article Mechanics

Development of a novel prestressing anchor for CFRP plates: Experimental investigations

Faizul M. Mohee et al.

COMPOSITE STRUCTURES (2017)

Add to Collection

Article Mechanics

Impact behaviour of pultruded GFRP composites under low-velocity impact loading

Zongjun Li et al.

COMPOSITE STRUCTURES (2017)

Add to Collection

Article Mechanics

In process monitoring of cutting temperature during the drilling of FRP laminate

L. Sorrentino et al.

COMPOSITE STRUCTURES (2017)

Add to Collection

Article Construction & Building Technology

Plain concrete cylinders and beams externally strengthened with natural flax fabric reinforced epoxy composites

Libo Yan

MATERIALS AND STRUCTURES (2016)

Add to Collection

Article Construction & Building Technology

Compressive behavior of concrete confined by CFRP and transverse spiral reinforcement. Part A: experimental study

Peng Yin et al.

MATERIALS AND STRUCTURES (2016)

Add to Collection

Article Mechanics

Development of insulated FRP-confined Precast Concrete Sandwich panel with side and top confining plates and dry bond

Thomas G. Norris et al.

COMPOSITE STRUCTURES (2016)

Add to Collection

Article Engineering, Multidisciplinary

Numerical modelling of flax short fibre reinforced and flax fibre fabric reinforced polymer composites

Janis Sliseris et al.

COMPOSITES PART B-ENGINEERING (2016)

Add to Collection

Article Engineering, Civil

Flexural strengthening of RC Beams with low-strength concrete using GFRP and CFRP

Ali Saribiyik et al.

STRUCTURAL ENGINEERING AND MECHANICS (2016)

Add to Collection

Article Construction & Building Technology

Geopolymer concrete-filled pultruded composite beams - Concrete mix design and application

Wahid Ferdous et al.

CEMENT & CONCRETE COMPOSITES (2015)

Add to Collection

Article Mechanics

Web-crippling of GFRP pultruded profiles. Part 2: Numerical analysis and design

Lourenco Almeida Fernandes et al.

COMPOSITE STRUCTURES (2015)

Add to Collection

Article Materials Science, Composites

Free vibration analysis of angle-ply laminate composite beams by mixed finite element formulation using the Gateaux differential

Atilla Ozutok et al.

SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS (2014)

Add to Collection

Article Construction & Building Technology

Investigation of flexural behaviors of hybrid beams formed with GFRP box section and concrete

Ferhat Aydin et al.

CONSTRUCTION AND BUILDING MATERIALS (2013)

Add to Collection

Article Engineering, Civil

FREE VIBRATION ANALYSIS OF CROSS-PLY LAMINATED COMPOSITE BEAMS BY MIXED FINITE ELEMENT FORMULATION

Atilla Ozutok et al.

INTERNATIONAL JOURNAL OF STRUCTURAL STABILITY AND DYNAMICS (2013)

Add to Collection

Article Engineering, Civil

Shear Strengthening of RC Beams with EB FRP: Influencing Factors and Conceptual Debonding Model

Amir Mofidi et al.

JOURNAL OF COMPOSITES FOR CONSTRUCTION (2011)

Add to Collection

Article Mechanics

The effect of CFRP and CFRP/concrete interface models when modelling retrofitted RC beams with FEM

Yasmeen Taleb Obaidat et al.

COMPOSITE STRUCTURES (2010)

Add to Collection

Article Materials Science, Multidisciplinary

Progressive fatigue failure behavior of glass/epoxy (±75)2 filament-wound pipes under pure internal pressure

Lokman Gemi et al.

MATERIALS & DESIGN (2009)

Add to Collection

Article Engineering, Multidisciplinary

Mechanical property variability in FRP laminates and its effect on failure prediction

D. J. Lekou et al.

COMPOSITES PART B-ENGINEERING (2008)

Add to Collection

Article Engineering, Civil

Mechanisms of shear resistance of concrete beams strengthened in shear with externally bonded FRP

Abdelhak Bousselham et al.

JOURNAL OF COMPOSITES FOR CONSTRUCTION (2008)

Add to Collection

Article Mechanics

Flexural stiffness characterization of fiber reinforced plastic (FRP) pultruded beams

Almir Barros da S. Santos Neto et al.

COMPOSITE STRUCTURES (2007)

Add to Collection

Article Engineering, Biomedical

Anodized titanium and stainless steel in contact with CFRP: An electrochemical approach considering galvanic corrosion

Yves Mueller et al.

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2007)

Add to Collection

Article Polymer Science

Degradation of polyurethanes in sea water

M Rutkowska et al.

POLYMER DEGRADATION AND STABILITY (2002)

Add to Collection

Article Engineering, Civil

Local buckling curves for the design of FRP profiles

M Pecce et al.

THIN-WALLED STRUCTURES (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.