☆ 4.7 Article

Compressive Behavior of Pultruded GFRP Boxes with Concentric Openings Strengthened by Different Composite Wrappings

POLYMERS (2022)

Related references

Note: Only part of the references are listed.

Review Construction & Building Technology

A review on the behaviour of reinforced concrete beams with fibre-reinforced polymer-strengthened web openings

Xuefei Nie et al.

Summary: This article reviews existing research on the creation of web openings in reinforced concrete beams and the use of fibre-reinforced polymer strengthening systems. Various factors affecting the structural performance of beams were thoroughly analyzed, and directions for future research were suggested based on existing studies.

ADVANCES IN STRUCTURAL ENGINEERING (2022)

Add to Collection

Article Engineering, Civil

Shear strengthening of reinforced concrete T-beams with anchored and non-anchored CFRP fabrics

Sakir Yazman et al.

Summary: This study investigated the strengthening of shear deficient T-beams with different CFRP configurations. Results showed that the contribution of EBR to shear capacity is significant and depended on anchorage angle and strengthening type. Among all methods, full wrapping CFRP and partial CFRP with a 45-degree anchorage type yielded the most effective results in enhancing shear capacity and stiffness while improving ductility significantly.

STRUCTURES (2022)

Add to Collection

Article Engineering, Civil

Behavior of CFRP-strengthened RC beams with circular web openings in shear zones: Numerical study

Yasin Onuralp Ozkilic et al.

Summary: This study investigates the behavior of reinforced concrete beams with circular openings and the effects of strengthening them with CFRP. Various parameters such as the opening/beam height ratio, concrete compressive strength, stirrup spacing, and CFRP application type were considered in the analysis. The study identifies important parameters that affect the performance of the beams and provides recommendations for CFRP strengthening based on different conditions.

STRUCTURES (2022)

Add to Collection

Article Chemistry, Applied

Investigation of Electrophoretic Deposition of PANI Nano fibers as a Manufacturing Technology for corrosion protection

Mohammed Fuseini et al.

Summary: This study describes the electrophoretic deposition process of polyaniline film using three models and analyzes its effects on film properties. The results show a linear deposition growth law and a transition in deposition mechanism from linear mode to parabolic.

PROGRESS IN ORGANIC COATINGS (2022)

Add to Collection

Article Polymer Science

Effect of Fiber Wrapping on Bending Behavior of Reinforced Concrete Filled Pultruded GFRP Composite Hybrid Beams

Lokman Gemi et al.

Summary: This paper presents experimental studies on the effect of FRP composite wrapping on the flexure performance of RC filled pultruded GFRP profile hybrid beams with damage analysis. The results show that the use of GFRP and CFRP composites for wrapping can significantly improve the structural performance of the beams, including maximum load-carrying capacity, initial stiffness, and ductility.

POLYMERS (2022)

Add to Collection

Article Mechanics

Effects of high pulling speeds on mechanical properties and morphology of pultruded GFRP composite flat laminates

Alexander Vedernikov et al.

Summary: By analyzing the relationship between pulling speed, morphology, and mechanical properties of pultruded glass fiber/vinyl ester resin composites, this study demonstrates the possibility of high-speed pultrusion for large cross-section profiles suitable for structural application. The results show that higher pulling speeds lead to the presence of bubbles, voids, and cracks, but significantly increase the output without compromising mechanical performance.

COMPOSITE STRUCTURES (2022)

Add to Collection

Article Construction & Building Technology

Strength compensation of deep beams with large web openings using carbon fiber-reinforced polymer sheets

Abbas A. Allawi et al.

Summary: This study experimentally investigated the behavior of reinforced concrete deep beams with large web openings in shear spans strengthened by carbon fiber-reinforced polymer sheets. The results showed that the creation of openings in shear spans affects the load-carrying capacity, and strengthening with carbon fiber-reinforced polymer sheets can increase the failure load and restrict deformability of deep beams.

ADVANCES IN STRUCTURAL ENGINEERING (2021)

Add to Collection

Article Mechanics

Effects of pulling speed on structural performance of L-shaped pultruded profiles

Alexander Vedernikov et al.

Summary: This study analyzed the influence of pulling speed on the structural characteristics of pultruded glass fiber/epoxy-vinyl resin composite profiles. The results showed that an increase in pulling speed led to an increase in spring-in angle, affecting the mechanical properties of the profiles. Profiles produced at different pulling speeds exhibited differences in cracking and mechanical characteristics.

COMPOSITE STRUCTURES (2021)

Add to Collection

Review Mechanics

Developments in polyester composite materials - An in-depth review on natural fibres and nano fillers

Mahmoud Yousry Mahmoud Zaghloul et al.

Summary: This review article examines the use of various reinforcing elements, such as nano fillers and natural fibers, in the manufacturing of polyester-based composite materials. It also analyzes the manufacturing conditions of reinforced particle PMCs and provides a comprehensive overview of the applications of nano particles and natural fibers in composite materials.

COMPOSITE STRUCTURES (2021)

Add to Collection

Article Engineering, Civil

Experimental, analytical and numerical investigation of pultruded GFRP composite beams infilled with hybrid FRP reinforced concrete

Lokman Gemi et al.

Summary: This paper presents experimental, analytical, and numerical analyses on the behavior of pultruded GFRP composite beams infilled with hybrid fiber reinforced concrete under four-point loading. The study found that the pultruded profile and composite wrapping significantly improved the performance of the beams, with hybrid reinforcements being recommended for all cases. Detailed damage analyses were also provided.

ENGINEERING STRUCTURES (2021)

Add to Collection

Article Construction & Building Technology

Numerical investigation of the parameters influencing the behavior of dapped end prefabricated concrete purlins with and without CFRP strengthening

Yasin Onuralp Ozkilic et al.

Summary: This study conducted a series of numerical modeling using the finite element program ABAQUS to investigate the shear damages of prefabricated concrete purlins (PCPs). The effects of various parameters on the shear capacity of PCPs were studied, and it was found that the most significant parameter is the orientation of carbon fiber reinforced polymers (CFRP).

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Article Mechanics

Experimental and Theoretical Investigation on Flexure Performance of Pultruded GFRP Composite Beams with Damage Analyses

Emrah Madenci et al.

COMPOSITE STRUCTURES (2020)

Add to Collection

Article Mechanics

Strengthening of RC beams with rectangular web openings using externally bonded FRP: Numerical simulation

X. F. Nie et al.

COMPOSITE STRUCTURES (2020)

Add to Collection

Review Materials Science, Composites

Pultruded materials and structures: A review

Alexander Vedernikov et al.

JOURNAL OF COMPOSITE MATERIALS (2020)

Add to Collection

Article Engineering, Civil

Experimental investigation for structural behaviour of self-compacting reinforced concrete hollow beams with in-place circular openings strengthened with CFRP laminates

Sadjad A. Hemzah et al.

STRUCTURES (2020)

Add to Collection

Article Mechanics

Buckling and free vibration analyses of pultruded GFRP laminated composites: Experimental, numerical and analytical investigations

Emrah Madenci et al.

COMPOSITE STRUCTURES (2020)

Add to Collection

Article Mechanics

Mechanical property evolution and service life prediction of pultruded carbon/glass hybrid rod exposed in harsh oil -well condition

Chenggao Li et al.

COMPOSITE STRUCTURES (2020)

Add to Collection

Article Construction & Building Technology

Innovative compound-type anchorage system for a large-diameter pultruded carbon/glass hybrid rod for bridge cable

Chenggao Li et al.

MATERIALS AND STRUCTURES (2020)

Add to Collection

Article Mechanics

Experimental analysis of reinforced concrete shear deficient beams with circular web openings strengthened by CFRP composite

Ceyhun Aksoylu et al.

COMPOSITE STRUCTURES (2020)

Add to Collection

Article Chemistry, Physical

Experimental Investigation of Reinforced Concrete Beam with Openings Strengthened Using FRP Sheets under Cyclic Load

Rania Salih et al.

MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

Strengthening the Structural Behavior of Web Openings in RC Deep Beam Using CFRP

Nurul Izzati Rahim et al.

MATERIALS (2020)

Add to Collection

Article Engineering, Civil

Damages on prefabricated concrete dapped-end purlins due to snow loads and a novel reinforcement detail

Ceyhun Aksoylu et al.

ENGINEERING STRUCTURES (2020)

Add to Collection

Article Mechanics

Behaviour of RC beams with a fibre-reinforced polymer (FRP)-strengthened web opening

X. F. Nie et al.

COMPOSITE STRUCTURES (2020)

Add to Collection

Article Materials Science, Composites

Fatigue and tensile behaviors of fiber-reinforced thermosetting composites embedded with nanoparticles

Moustafa Mahmoud Yousry Zaghloul et al.

JOURNAL OF COMPOSITE MATERIALS (2019)

Add to Collection

Article Construction & Building Technology

Experimental study of RC deep beams with opening and FRP composites installed by means of EBR and EBROG methods

Abolfazl Arabzadeh et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Add to Collection

Article Materials Science, Characterization & Testing

Combined effects of temperature, hydraulic pressure and salty concentration on the water uptake and mechanical properties of a carbon/glass fibers hybrid rod in salty solutions

Chenggao Li et al.

POLYMER TESTING (2019)

Add to Collection

Article Materials Science, Paper & Wood

Surface modification of ramie fibers with silanized CNTs through a simple spray-coating method

Wanru Wang et al.

CELLULOSE (2019)

Add to Collection

Article Construction & Building Technology

Experimental and numerical study on FRP-upgraded RC beams with large rectangular web openings in shear zones

Hussein M. Elsanadedy et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Add to Collection

Article Engineering, Civil

Behavior of Reactive-Powder Concrete Deep Beams with CFRP-Strengthened Openings

Ragheed Fatehi Makki et al.

PRACTICE PERIODICAL ON STRUCTURAL DESIGN AND CONSTRUCTION (2019)

Add to Collection

Article Mechanics

Experimental study on RC T-section beams with an FRP-strengthened web opening

X. F. Nie et al.

COMPOSITE STRUCTURES (2018)

Add to Collection

Article Engineering, Mechanical

A damage model for high-cycle fatigue behavior of bond between FRP bar and concrete

Mohammadali Rezazadeh et al.

INTERNATIONAL JOURNAL OF FATIGUE (2018)

Add to Collection

Article Polymer Science

Mechanical properties of linear low-density polyethylene fire-retarded with melamine polyphosphate

Moustafa Mahmoud Yousry Mahmoud Zaghloul

JOURNAL OF APPLIED POLYMER SCIENCE (2018)

Add to Collection

Article Construction & Building Technology

Behavior of FRP-Strengthened RC Beams with Large Rectangular Web Openings in Flexure Zones: Experimental and Numerical Study

Tarek Almusallam et al.

INTERNATIONAL JOURNAL OF CONCRETE STRUCTURES AND MATERIALS (2018)

Add to Collection

Article Engineering, Civil

Progressive Damage Analysis of Web Crippling of GFRP Pultruded I-Sections

Francisco Nunes et al.

JOURNAL OF COMPOSITES FOR CONSTRUCTION (2017)

Add to Collection

Article Materials Science, Composites

Influence of flame retardant magnesium hydroxide on the mechanical properties of high density polyethylene composites

Moustafa Mahmoud Yousry Zaghloul et al.

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2017)

Add to Collection

Article Materials Science, Characterization & Testing

Experimental and modeling analysis of mechanical-electrical behaviors of polypropylene composites filled with graphite and MWCNT fillers

Moustafa Mahmoud Yousry Zaghloul et al.

POLYMER TESTING (2017)

Add to Collection

Article Engineering, Mechanical

Fatigue behavior and failure mechanism of basalt FRP composites under long-term cyclic loads

Xing Zhao et al.

INTERNATIONAL JOURNAL OF FATIGUE (2016)

Add to Collection

Article Engineering, Civil

Behavior and Design Aspects of FRP-Strengthened URM Walls under Out-of-Plane Loading

H. M. Elsanadedy et al.

JOURNAL OF COMPOSITES FOR CONSTRUCTION (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Moisture diffusion under hydrostatic pressure in composites

Corentin Humeau et al.

MATERIALS & DESIGN (2016)

Add to Collection

Article Engineering, Civil

Prediction of Intermediate Crack Debonding Strain of Externally Bonded FRP Laminates in RC Beams and One-Way Slabs

H. M. Elsanadedy et al.

JOURNAL OF COMPOSITES FOR CONSTRUCTION (2014)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Three-dimensional meso-scale finite element modeling of bonded joints between a near-surface mounted FRP strip and concrete

J. G. Teng et al.

COMPUTERS & STRUCTURES (2013)

Add to Collection

Article Mechanics

Strengthening R/C beams with opening by externally installed FRP rods: Behavior and analysis

Amorn Pimanmas

COMPOSITE STRUCTURES (2010)

Add to Collection

Article Engineering, Civil

Behavior of CFRP strengthened reinforced concrete beams in corrosive environment

Khaled Soudki et al.

JOURNAL OF COMPOSITES FOR CONSTRUCTION (2007)

Add to Collection

Article Mechanics

Design against cracking at openings in reinforced concrete beams strengthened with composite sheets

HA Abdalla et al.

COMPOSITE STRUCTURES (2003)

Add to Collection

Article Construction & Building Technology

Investigation on Vierendeel mechanism in steel beams with circular web openings

KF Chung et al.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2001)

Add to Collection

© Peeref 2019-2024. All rights reserved.