☆ 4.7 Article

Evaluation of Natural and Modified Castor Oil Incorporation on the Melt Processing and Physico-Chemical Properties of Polylactic Acid

POLYMERS (2022)

Related references

Note: Only part of the references are listed.

Review Materials Science, Multidisciplinary

Recent advances in cellulose-based hydrophobic food packaging

Nilofar Asim et al.

Summary: The global food packaging market is a billion-dollar industry that is increasingly turning towards environmentally friendly and biodegradable materials like nanocellulose. Surface hydrophobic modification of cellulose is a key strategy to improve the water barrier properties and mechanical stability of packaging materials, while also reducing adhesion of liquid foods inside food packaging.

EMERGENT MATERIALS (2022)

Add to Collection

Article Engineering, Environmental

Properties Investigation of Epoxidized Sunflower Oil as Bioplasticizer for Poly (Lactic Acid)

Mohamed Bouti et al.

Summary: This study aimed to improve the low intrinsic ductility of poly (lactic acid) (PLA) by using a novel bio-sourced plasticizer, resulting in a fully biodegradable material suitable for film manufacturing. The addition of epoxidized sunflower oil (ESO) at 6.5% in a 20wt% PLA blend was found to be an effective plasticizer, increasing elongation and enhancing thermal stability. The plasticizers decreased tensile strength and modulus of PLA, while increasing elongation at break.

JOURNAL OF POLYMERS AND THE ENVIRONMENT (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Tailoring Oligomeric Plasticizers for Polylactide through Structural Control

Wenxiang Xuan et al.

Summary: Structural variations were used to tailor the performance of biobased plasticizers for polylactide (PLA), including thermal stability, plasticizing efficiency, and migration resistance. Different plasticizers with varying structures showed different properties. Plasticizers based on 1,4-butanediol decreased the glass-transition temperature and increased the strain at break of PLA, while those based on isosorbide exhibited better thermal stability and migration resistance. Plasticizers with levulinate ester end groups had improved thermal stability, plasticizing efficiency, and migration resistance compared to those with hydroxyl end groups.

ACS OMEGA (2022)

Add to Collection

Review Engineering, Chemical

Polylactic acid in the fabrication of separation membranes: A review

Vahid Vatanpour et al.

Summary: PLA, as a bio-based and biodegradable polymer, has wide-ranging applications in membrane fabrication.

SEPARATION AND PURIFICATION TECHNOLOGY (2022)

Add to Collection

Review Chemistry, Applied

Preparation of Ricinoleic Acid from Castor Oil : A Review

Febri Odel Nitbani et al.

Summary: Castor oil, extracted from castor seeds, is a vegetable product widely used in various industries. It contains ricinoleic acid, which has bactericidal, anti-inflammatory, and antiherpetic properties. This article reviewed the reaction stages for the preparation of ricinoleic acid from castor oil, highlighting the efficacy of enzyme-catalyzed hydrolysis.

JOURNAL OF OLEO SCIENCE (2022)

Add to Collection

Article Agricultural Engineering

Synthesis and thermal characterization of some hardeners for epoxy resins based on castor oil and cyclic anhydrides

Fanica Mustata et al.

Summary: Castor oil was converted into esters with carboxyl groups by reacting with cyclic anhydrides, potentially serving as crosslinking agents for epoxy resins. The thermal degradation of the products was analyzed using thermogravimetric, Fourier transform infrared and mass spectroscopy techniques, revealing a multi-step kinetics process. The most probable thermal decomposition mechanism was determined through multivariate linear regression analysis, showing a three-step process.

INDUSTRIAL CROPS AND PRODUCTS (2021)

Add to Collection

Article Chemistry, Physical

The influence of self-crosslinked epoxidized castor oil on the properties of Poly (lactic acid) via dynamic vulcanization: Toughening effect, thermal properties and structures

Weidi He et al.

Summary: The study demonstrates that utilizing epoxidized castor oil (ECO) with self-crosslinking structure to prepare PLA/ECO blends can achieve better rheological and dynamic mechanical properties, higher crystallinity, and lower thermal stability compared to raw castor oil filled samples. ECO also provides better toughening effect than raw castor oil. However, excessive ECO content leads to aggregation in local areas, resulting in a significant decrease in the mechanical properties of the material.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2021)

Add to Collection

Article Chemistry, Physical

Development of hydrophobic polyurethane/castor oil biocomposites with agroindustrial residues for sorption of oils and organic solvents

Fernanda Vieira Amorim et al.

Summary: This study developed and characterized castor oil-based polyurethane biocomposites reinforced with malt and/or acerola residues for adsorption/separation of various organic oils/solvents. The biocomposites showed high adsorption capacity and hydrophobicity, and could be quickly and repeatedly recovered in different environments, making them suitable for treatment of effluents with organic pollutants.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2021)

Add to Collection

Article Green & Sustainable Science & Technology

The lubrication performance and viscosity behavior of castor oil under high temperature

Qunfeng Zeng

Summary: Castor oil, as an environmentally friendly lubricant, has both advantages and disadvantages, mainly influenced by temperature. The experiment found that the lubrication performance of castor oil is best at 40 degrees Celsius, with a very low coefficient of friction, but relatively poor at other temperatures.

GREEN MATERIALS (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Application of Different Vegetable Oils as Processing Aids in Industrial Rubber Composites: A Sustainable Approach

Kumarjyoti Roy et al.

Summary: Rubber composites based on renewable vegetable oils have advantages over petroleum-based plasticizers in rubber products, offering significant improvements in performance in an environmentally friendly and sustainable manner. In the future, the use of vegetable oil-based plasticizers may lead to considerable advancements in the field of filled rubber composites.

ACS OMEGA (2021)

Add to Collection

Article Polymer Science

PLA-Based Materials Containing Bio-Plasticizers and Chitosan Modified with Rosehip Seed Oil for Ecological Packaging

Raluca Nicoleta Darie-Nita et al.

Summary: Various recipes for food packaging applications based on PLA, bio-plasticizers, and active agents encapsulated into chitosan by the emulsion method have been developed, showing improved mechanical and antimicrobial/antioxidant properties for sustainable food packaging solutions.

POLYMERS (2021)

Add to Collection

Article Polymer Science

Dual Plasticizer/Thermal Stabilizer Effect of Epoxidized Chia Seed Oil (Salvia hispanica L.) to Improve Ductility and Thermal Properties of Poly(Lactic Acid)

Ivan Dominguez-Candela et al.

Summary: The study investigated the effects of using epoxidized chia seed oil (ECO) as a new plasticizer on poly(lactic acid) (PLA), and found that adding 10 wt.% of ECO can improve the elongation at break of PLA by 700%. Additionally, thermal stabilization increases with increasing ECO content, and the degradation and migration properties of ECO in composting conditions are favorable for application in the packaging industry.

POLYMERS (2021)

Add to Collection

Review Polymer Science

A Review of the Applications and Biodegradation of Polyhydroxyalkanoates and Poly(lactic acid) and Its Composites

Jet Yin Boey et al.

Summary: The overconsumption and improper handling of plastic result in environmental issues, while biopolymers like PHA and PLA are considered alternative options. These biopolymers show potential in food packaging, but further improvements are needed to enhance their applicability.

POLYMERS (2021)

Add to Collection

Review Food Science & Technology

Castor oil (Ricinus communis): a review on the chemical composition and physicochemical properties

Akwasi Yeboah et al.

Summary: The increasing demand for vegetable oils due to population growth has led to a recognition of the high nutritive value of plant-based oils. Castor oil, in particular, stands out for its unique ricinoleic acid and bioactive compounds, offering oxidation stability, anti-inflammatory, and antioxidant properties. The chemical composition of castor oil, including triglycerides, fatty acids, and bioactive compounds, contributes to its high quality compared to other vegetable oils.

FOOD SCIENCE AND TECHNOLOGY (2021)

Add to Collection

Article Multidisciplinary Sciences

Epoxidised sesame oil as a biobased coupling agent and plasticiser in polylactic acid/thermoplastic yam starch blends

Rodrigo Ortega-Toro et al.

Summary: This study aimed to enhance the physicochemical properties of PLA and TPS blends using epoxidised sesame oil, improving the interactions between the polymers and the smoothness of the film surface. The addition of ESO led to increased thermal stability and enhanced interfacial adhesion, showing potential for semi-rigid food packaging applications.

HELIYON (2021)

Add to Collection

Article Engineering, Environmental

Pervaporation separation of chlorinated environmental pollutants from aqueous solutions by castor oil based composite interpenetrating network membranes

K. Pattabhi Ramaiah et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection

Article Environmental Sciences

Photocatalytic Degradation of Ampicillin Using PLA/TiO2 Hybrid Nanofibers Coated on Different Types of Fiberglass

Constantin Bobirica et al.

WATER (2020)

Add to Collection

Article Chemistry, Physical

Availability of PLA/SIS blends for packaging and medical applications

Ana-Maria Luchian-Lupu et al.

RADIATION PHYSICS AND CHEMISTRY (2020)

Add to Collection

Article Chemistry, Physical

Printability, Mechanical and Thermal Properties of Poly(3-Hydroxybutyrate)-Poly(Lactic Acid)-Plasticizer Blends for Three-Dimensional (3D) Printing

Sona Kontarova et al.

MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Sulfur-Modified Coated Slow-Release Fertilizer Based on Castor Oil: Synthesis and a Controlled-Release Model

Xiaohan Zhao et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2020)

Add to Collection

Article Polymer Science

Study on the Synthesis of Castor Oil-Based Plasticizer and the Properties of Plasticized Nitrile Rubber

Qinghe Fu et al.

POLYMERS (2020)

Add to Collection

Article Biochemistry & Molecular Biology

Preparation of bioactive functional poly(lactic acid)/curcumin composite film for food packaging application

Swarup Roy et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2020)

Add to Collection

Article Polymer Science

Effect of hydrolyzed collagen on thermal, mechanical and biological properties of poly(lactic acid) bionanocomposites

Maria Rapa et al.

IRANIAN POLYMER JOURNAL (2019)

Add to Collection

Article Pharmacology & Pharmacy

Antioxidant PLA Composites Containing Lignin for 3D Printing Applications: A Potential Material for Healthcare Applications

Juan Dominguez-Robles et al.

PHARMACEUTICS (2019)

Add to Collection

Article Polymer Science

Improving Mechanical Properties for Extrusion-Based Additive Manufacturing of Poly(Lactic Acid) by Annealing and Blending with Poly(3-Hydroxybutyrate)

Sisi Wang et al.

POLYMERS (2019)

Add to Collection

Article Materials Science, Composites

Thermal and Flammability Characteristics of Blended Jatropha Bio-Epoxy as Matrix in Carbon Fiber-Reinforced Polymer

Mohd Radzi Mohd Hafiezal et al.

JOURNAL OF COMPOSITES SCIENCE (2019)

Add to Collection

Article Agricultural Engineering

Preparation and characterization of poly(lactic acid) plasticized with vegetable oils and reinforced with sisal fibers

A. Orue et al.

INDUSTRIAL CROPS AND PRODUCTS (2018)

Add to Collection

Article Materials Science, Characterization & Testing

Nontoxic bio-plasticizers for PVC as replacements for conventional toxic plasticizers

Witold Brostow et al.

POLYMER TESTING (2018)

Add to Collection

Article Chemistry, Multidisciplinary

An environmentally sustainable plasticizer toughened polylactide

Hailan Kang et al.

RSC ADVANCES (2018)

Add to Collection

Article Materials Science, Textiles

Preparation and Properties of Poly(lactic Acid)/PLA-g-ABS Blends

Charungkit Chaikeaw et al.

FIBERS AND POLYMERS (2018)

Add to Collection

Article Materials Science, Multidisciplinary

The effect of plasticizer on the shape memory properties of poly(lactide acid)/poly(ethylene glycol) blends

Yijun Guo et al.

JOURNAL OF MATERIALS RESEARCH (2018)

Add to Collection

Article Chemistry, Physical

Effect of Selected Commercial Plasticizers on Mechanical, Thermal, and Morphological Properties of Poly(3-hydroxybutyrate)/Poly(lactic acid)/Plasticizer Biodegradable Blends for Three-Dimensional (3D) Print

Premysl Mencik et al.

MATERIALS (2018)

Add to Collection

Article Agricultural Engineering

Plasticization effect of epoxidized cottonseed oil (ECSO) on poly(lactic acid)

Alfredo Carbonell-Verdu et al.

INDUSTRIAL CROPS AND PRODUCTS (2017)

Add to Collection

Article Materials Science, Biomaterials

Fabrication and characterization of dental mirror product using polylactic acid biocomposites

Savitha Saravana et al.

INTERNATIONAL JOURNAL OF POLYMERIC MATERIALS AND POLYMERIC BIOMATERIALS (2017)

Add to Collection

Article Polymer Science

Plasticizing effect of coconut oil on morphological, mechanical, thermal, rheological, barrier, and optical properties of poly(lactic acid): A promising candidate for food packaging

Siddharth Mohan Bhasney et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2017)

Add to Collection

Article Green & Sustainable Science & Technology

An attributional Life Cycle Assessment application experience to highlight environmental hotspots in the production of foamy polylactic acid trays for fresh-food packaging usage

Carlo Ingrao et al.

JOURNAL OF CLEANER PRODUCTION (2017)

Add to Collection

Article Materials Science, Biomaterials

Fabrication and characterization of dental mirror product using polylactic acid biocomposites

Savitha Saravana et al.

INTERNATIONAL JOURNAL OF POLYMERIC MATERIALS AND POLYMERIC BIOMATERIALS (2017)

Add to Collection

Article Polymer Science

Evaluation of some eco-friendly plasticizers for PLA films processing

Raluca N. Darie-Nita et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2016)

Add to Collection

Article Polymer Science

Epoxidized soybean oil-plasticized poly(lactic acid) films performance as impacted by storage

Cheng Xing et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2016)

Add to Collection

Review Pharmacology & Pharmacy

Polylactic acid (PLA) controlled delivery carriers for biomedical applications

Betty Tyler et al.

ADVANCED DRUG DELIVERY REVIEWS (2016)

Add to Collection

Article Polymer Science

Bio-based polyurethane prepared from Kraft lignin and modified castor oil

L. B. Tavares et al.

EXPRESS POLYMER LETTERS (2016)

Add to Collection

Article Engineering, Biomedical

Complex poly(lactic acid)-based biomaterial for urinary catheters: II. Biocompatibility

Elena Stoleru et al.

BIOINSPIRED BIOMIMETIC AND NANOBIOMATERIALS (2016)

Add to Collection

Article Polymer Science

Effect of castor oil/polycaprolactone hybrid polyols on the properties of biopolyurethane

Kyung Kyu Choi et al.

MACROMOLECULAR RESEARCH (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Synthesis and Application of Environmental Castor Oil Based Polyol Ester Plasticizers for Poly(vinyl chloride)

Puyou Jia et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2015)

Add to Collection

Article Materials Science, Characterization & Testing

Tailoring polylactide (PLA) properties for automotive applications: Effect of addition of designed additives on main mechanical properties

D. Notta-Cuvier et al.

POLYMER TESTING (2014)

Add to Collection

Article Green & Sustainable Science & Technology

Comparative studies of thermal, oxidative and low temperature properties of waste cooking oil and castor oil

Venu Babu Borugadda et al.

JOURNAL OF RENEWABLE AND SUSTAINABLE ENERGY (2013)

Add to Collection

Article Nanoscience & Nanotechnology

Tough Blends of Polylactide and Castor Oil

Megan L. Robertson et al.

ACS APPLIED MATERIALS & INTERFACES (2011)

Add to Collection

Article Engineering, Environmental

The Properties of Poly(l-Lactide) Prepared by Different Synthesis Procedure

Ivan S. Ristic et al.

JOURNAL OF POLYMERS AND THE ENVIRONMENT (2011)

Add to Collection

Article Food Science & Technology

Castor oil as a renewable resource for the chemical industry

Hatice Mutlu et al.

EUROPEAN JOURNAL OF LIPID SCIENCE AND TECHNOLOGY (2010)

Add to Collection

Article Polymer Science

Thermal, mechanical and rheological properties of poly (lactic acid)/epoxidized soybean oil blends

Fathilah Ali et al.

POLYMER BULLETIN (2009)

Add to Collection

Article Polymer Science

Polyester polyols and polyurethanes from ricinoleic acid

Zoran S. Petrovic et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2008)

Add to Collection

Article Polymer Science

Plasticization of semicrystalline poly(L-lactide) with poly(propylene glycol)

E. Piorkowska et al.

POLYMER (2006)

Add to Collection

Review Biochemistry & Molecular Biology

An overview of polylactides as packaging materials

R Auras et al.

MACROMOLECULAR BIOSCIENCE (2004)

Add to Collection

Article Polymer Science

Thermal and mechanical properties of plasticized poly(L-lactic acid)

M Baiardo et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2003)

Add to Collection

© Peeref 2019-2024. All rights reserved.