Related references
Note: Only part of the references are listed.Self-Organization Postprocess for Additive Manufacturing in Producing Advanced Functional Structure and Material
Jinchun Chi et al.
ADVANCED ENGINEERING MATERIALS (2022)
Graphene Oxide-loaded magnetic nanoparticles within 3D hydrogel form High-performance scaffolds for bone regeneration and tumour treatment
Yan Li et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2022)
Soft magnetic composites for highly deformable actuators by four-dimensional electrohydrodynamic printing
Zhongbao Wang et al.
COMPOSITES PART B-ENGINEERING (2022)
Investigating the use of 3D printed soft magnetic PEEK-based composite for space compliant electrical motors
Miriam Ferrara et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2022)
Magnetic Field-Assisted 3D Printing of Limpet Teeth Inspired Polymer Matrix Composite With Compression Reinforcement
Dylan Joralmon et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2022)
Manufacturing of a Magnetic Composite Flexible Filament and Optimization of a 3D Printed Wideband Electromagnetic Multilayer Absorber in X-Ku Frequency Bands
Christophe Vong et al.
MATERIALS (2022)
3D Printing of Composite Material for Electromechanical Energy Harvesters
Wojciech Burlikowski et al.
ELECTRONICS (2022)
Particle-resin systems for additive manufacturing of rigid and elastic magnetic polymeric composites
Shahriar Safaee et al.
ADDITIVE MANUFACTURING (2022)
Micromagnetic Simulations of Nanoparticles with Varying Amount of Agglomeration
Tomasz Blachowicz et al.
MACROMOLECULAR SYMPOSIA (2022)
Magnetic annealing of extruded thermoplastic magnetic elastomers for 3D-Printing via FDM
Nathan A. Fischer et al.
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2022)
3D printed magnetic polymer composite hydrogels for hyperthermia and magnetic field driven structural manipulation
Sayan Ganguly et al.
PROGRESS IN POLYMER SCIENCE (2022)
RF Characterization of 3-D-Printed Tunable Resonators on a Composite Substrate Infused With Magnetic Nanoparticles
Yaaqoub Malallah et al.
IEEE MICROWAVE AND WIRELESS COMPONENTS LETTERS (2022)
Magnetic field assisted 3D printing of short carbon fibre-reinforced polymer composites
Celia Pearson et al.
MATERIALS TODAY-PROCEEDINGS (2022)
Investigations for magnetic properties of PLA-PVC-Fe3O4-wood dust blend for self-assembly applications
Sudhir Kumar et al.
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2021)
Binder jet 3D printing?Process parameters, materials, properties, modeling, and challenges*
Amir Mostafaei et al.
PROGRESS IN MATERIALS SCIENCE (2021)
Investigations into the microwave shielding behavior of oriented Polycaprolactone/Carbonyl iron particles composites fabricated using magnetic field assisted extrusion 3D printing
Usharani Rath et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2021)
3-D printed soft magnetic helical coil actuators of iron oxide embedded polydimethylsiloxane
Rasoul Bayaniahangar et al.
SENSORS AND ACTUATORS B-CHEMICAL (2021)
Controlling magnetic properties of 3D-printed magnetic elastomer structures via fused deposition modeling
Thomas M. Calascione et al.
AIP ADVANCES (2021)
3D Printable Electrically Conductive Hydrogel Scaffolds for Biomedical Applications: A Review
Sandya Shiranthi Athukorala et al.
POLYMERS (2021)
A wide-angle broadband electromagnetic absorbing metastructure using 3D printing technology
Yubing Duan et al.
MATERIALS & DESIGN (2021)
Effect of silane coupling on the properties of polylactic acid/barium ferrite magnetic composite filament for the 3D printing process
Kankavee Sukthavorn et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2021)
3D printed composites with uniform distribution of Fe3O4 nanoparticles and magnetic shape anisotropy
Adrianna Kania et al.
ADDITIVE MANUFACTURING (2021)
Remote Sensing and Remote Actuation via Silicone-Magnetic Nanorod Composites
Bryce J. Stottlemire et al.
ADVANCED MATERIALS TECHNOLOGIES (2021)
Advances in powder bed fusion 3D printing in drug delivery and healthcare
Atheer Awad et al.
ADVANCED DRUG DELIVERY REVIEWS (2021)
3D Printing of Flexible Composites via Magnetophoresis: Toward Medical Application Based on Low-Frequency Induction Heating Effect
Ziyin Xiang et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2021)
Development and Characterization of Field Structured Magnetic Composites
Balakrishnan Nagarajan et al.
POLYMERS (2021)
Fatigue analysis of wire arc additive manufactured (3D printed) components with unmilled surface
Helen Bartsch et al.
STRUCTURES (2021)
Optical elements from 3D printed polymers
Tomasz Blachowicz et al.
E-POLYMERS (2021)
Laser polishing of Cu/PLA composite parts fabricated by fused deposition modeling: Analysis of surface finish and mechanical properties
Lan Chen et al.
POLYMER COMPOSITES (2020)
3D printed shape-programmable magneto-active soft matter for biomimetic applications
Song Qi et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2020)
Dot-patterned hybrid magnetorheological elastomer developed by 3D printing
A. K. Bastola et al.
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2020)
Atomic Force Microscope-Based Meniscus-Confined Three-Dimensional Electrodeposition
David Eliyahu et al.
ADVANCED MATERIALS TECHNOLOGIES (2020)
3D Printing of ABS Barium Ferrite Composites
Thomas Hanemann et al.
MATERIALS (2020)
3D Printed MEMS Technology-Recent Developments and Applications
Tomasz Blachowicz et al.
MICROMACHINES (2020)
Effect of particle size distribution on obtaining novel MnAlC-based permanent magnet composites and flexible filaments for 3D-printing
Ester M. Palmero et al.
ADDITIVE MANUFACTURING (2020)
Fabrication and Characterization of Fe16N2Micro-Flake Powders and Their Extrusion-Based 3D Printing into Permanent Magnet Form
Onur Zirhli et al.
ADVANCED ENGINEERING MATERIALS (2020)
3D printed stimuli-responsive magnetic nanoparticle embedded alginate-methylcellulose hydrogel actuators
Daria Podstawczyk et al.
ADDITIVE MANUFACTURING (2020)
Functionalizing magnet additive manufacturing with in-situ magnetic field source
Abhishek Sarkar et al.
ADDITIVE MANUFACTURING (2020)
3D printing of Fe3O4 functionalized graphene-polymer (FGP) microarchitectures
Muhammad Wajahat et al.
CARBON (2020)
3D printing of biofiber-reinforced composites and their mechanical properties: a review
Lai Jiang et al.
RAPID PROTOTYPING JOURNAL (2020)
Bioinspired composites reinforced with ordered steel fibers produced via a magnetically assisted 3D printing process
Yunhai Ma et al.
JOURNAL OF MATERIALS SCIENCE (2020)
On the reliability of highly magnified micrographs for structural analysis in materials science
Martin Wortmann et al.
SCIENTIFIC REPORTS (2020)
Rheology-Assisted Microstructure Control for Printing Magnetic Composites-Material and Process Development
Balakrishnan Nagarajan et al.
POLYMERS (2020)
3D-printed programmable tensegrity for soft robotics
Hajun Lee et al.
SCIENCE ROBOTICS (2020)
Magnetically loaded polymer composites using stereolithography - Material processing and characterization
Balakrishnan Nagarajan et al.
MATERIALS TODAY COMMUNICATIONS (2020)
Development and Characterization of Stable Polymer Formulations for Manufacturing Magnetic Composites
Balakrishnan Nagarajan et al.
JOURNAL OF MANUFACTURING AND MATERIALS PROCESSING (2020)
Permalloy/polydimethylsiloxane nanocomposite inks for multimaterial direct ink writing of gigahertz electromagnetic structures
Qikun Shi et al.
JOURNAL OF MATERIALS CHEMISTRY C (2020)
3D printing of magnetic parts by laser powder bed fusion of iron oxide nanoparticle functionalized polyamide powders
Tim Hupfeld et al.
JOURNAL OF MATERIALS CHEMISTRY C (2020)
Magnetic-Polymer Composites for Bonding and 3D Printing of Permanent Magnets
Ester Maria Palmero et al.
IEEE TRANSACTIONS ON MAGNETICS (2019)
A critical review of fused deposition modeling 3D printing technology in manufacturing polylactic acid parts
Zengguang Liu et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
A Fully Three-Dimensional Printed Inchworm-Inspired Soft Robot with Magnetic Actuation
Erina B. Joyee et al.
SOFT ROBOTICS (2019)
Digital light processing (DLP) 3D-printing technology and photoreactive polymers in fabrication of modified-release tablets
Hossam Kadry et al.
EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2019)
Fully 3D-Printed, Monolithic, Mini Magnetic Actuators for Low-Cost, Compact Systems
Anthony P. Taylor et al.
JOURNAL OF MICROELECTROMECHANICAL SYSTEMS (2019)
Investigations of polylactic acid reinforced composite feedstock filaments for multimaterial three-dimensional printing applications
Sudhir Kumar et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2019)
Topology optimization and 3D printing of multimaterial magnetic actuators and displays
Subramanian Sundaram et al.
SCIENCE ADVANCES (2019)
Thermal Metamaterials with Site-Specific Thermal Properties Fabricated by 3D Magnetic Printing
Luquan Ren et al.
ADVANCED MATERIALS TECHNOLOGIES (2019)
Influence of mixed isotropic fiber angles and hot press on the mechanical properties of 3D printed composites
Hui Mei et al.
ADDITIVE MANUFACTURING (2019)
Composites based on metallic particles and tuned filling factor for 3D-printing by Fused Deposition Modeling
Ester M. Palmero et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)
Analysis of mechanical behavior of 3D printed heterogeneous particle-polymer composites
Erina Baynojir Joyee et al.
COMPOSITES PART B-ENGINEERING (2019)
3D printed poly(lactic acid) composites with grafted cellulose nanofibers: Effect of nanofiber and post-fabrication annealing treatment on composite flexural properties
Ju Dong et al.
ADDITIVE MANUFACTURING (2019)
Magnetic programming of 4D printed shape memory composite structures
Fenghua Zhang et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)
Personalized 4D printing of bioinspired tracheal scaffold concept based on magnetic stimulated shape memory composites
Wei Zhao et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2019)
Bioinspired fiber-regulated composite with tunable permanent shape and shape memory properties via 3d magnetic printing
Luquan Ren et al.
COMPOSITES PART B-ENGINEERING (2019)
3D-printing of novel magnetic composites based on magnetic nanoparticles and photopolymers
Norbert Loewa et al.
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2019)
Tensile properties and failure behavior of chopped and continuous carbon fiber composites produced by additive manufacturing
Juan Naranjo-Lozada et al.
ADDITIVE MANUFACTURING (2019)
3D Printing of Thermoplastic-Bonded Soft- and Hard-Magnetic Composites: Magnetically Tuneable Architectures and Functional Devices
George Chatzipirpiridis et al.
ADVANCED INTELLIGENT SYSTEMS (2019)
Direct-write 3D printing of NdFeB bonded magnets
Brett Gibson Compton et al.
MATERIALS AND MANUFACTURING PROCESSES (2018)
3D magnetic printing of bio-inspired composites with tunable mechanical properties
Luquan Ren et al.
JOURNAL OF MATERIALS SCIENCE (2018)
Development of hybrid magnetorheological elastomers by 3D printing
A. K. Bastola et al.
POLYMER (2018)
Development of permanent magnet MnAlC/polymer composites and flexible filament for bonding and 3D-printing technologies
Ester M. Palmero et al.
SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS (2018)
Biofabrication: A Guide to Technology and Terminology
Lorenzo Moroni et al.
TRENDS IN BIOTECHNOLOGY (2018)
A 3D-Printable Polymer-Metal Soft-Magnetic Functional CompositeDevelopment and Characterization
Bilal Khatri et al.
MATERIALS (2018)
Microstructures Fabricated by Two-Photon Polymerization and Their Remote Manipulation Techniques: Toward 3D Printing of Micromachines
Yang Lin et al.
ADVANCED OPTICAL MATERIALS (2018)
3D-printing polymer-based permanent magnets
R. Domingo-Roca et al.
MATERIALS & DESIGN (2018)
3D printable conductive materials for the fabrication of electrochemical sensors: A mini review
Hairul Hisham Hamzah et al.
ELECTROCHEMISTRY COMMUNICATIONS (2018)
Direct-write of free-form building blocks for artificial magnetic 3D lattices
Lukas Keller et al.
SCIENTIFIC REPORTS (2018)
3D Printing of Functional Assemblies with Integrated Polymer-Bonded Magnets Demonstrated with a Prototype of a Rotary Blood Pump
Kai von Petersdorff-Campen et al.
APPLIED SCIENCES-BASEL (2018)
4D Printing of Complex Structures with a Fast Response Time to Magnetic Stimulus
Pengfei Zhu et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Effects of 3-D Printed Structural Characteristics on Magnetic Properties
Lindsey M. Bollig et al.
IEEE TRANSACTIONS ON MAGNETICS (2017)
3D printed magnetic polymer composite transformers
Lindsey M. Bollig et al.
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2017)
Magnetic-Field-Assisted Projection Stereolithography for Three-Dimensional Printing of Smart Structures
Lu Lu et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2017)
3D printed ferromagnetic composites for microwave applications
Younes Arbaoui et al.
JOURNAL OF MATERIALS SCIENCE (2017)
A novel hybrid magnetorheological elastomer developed by 3D printing
A. K. Bastola et al.
MATERIALS & DESIGN (2017)
Three-Dimensional (3D) Printing of Polymer-Metal Hybrid Materials by Fused Deposition Modeling
Susanna Fafenrot et al.
MATERIALS (2017)
Direct-Write 3D Printing of Composite Materials with Magnetically Aligned Discontinuous Reinforcement
Joshua J. Martin et al.
MICRO- AND NANOTECHNOLOGY SENSORS, SYSTEMS, AND APPLICATIONS IX (2017)
Decentralization and Localization of Production: The Organizational and Economic Consequences of Additive Manufacturing (3D Printing)
Avner Ben-Ner et al.
CALIFORNIA MANAGEMENT REVIEW (2017)
Metallurgy of high-silicon steel parts produced using Selective Laser Melting
Michele Garibaldi et al.
ACTA MATERIALIA (2016)
3D print of polymer bonded rare-earth magnets, and 3D magnetic field scanning with an end-user 3D printer
C. Huber et al.
APPLIED PHYSICS LETTERS (2016)
Big Area Additive Manufacturing of High Performance Bonded NdFeB Magnets
Ling Li et al.
SCIENTIFIC REPORTS (2016)
Mechanical and electrical contacting of electronic components on textiles by 3D printing
Nils Grimmelsmann et al.
3RD INTERNATIONAL CONFERENCE ON SYSTEM-INTEGRATED INTELLIGENCE: NEW CHALLENGES FOR PRODUCT AND PRODUCTION ENGINEERING (2016)
Fabrication and characterization of a magnetic micro-actuator based on deformable Fe-doped PDMS artificial cilium using 3D printing
Fengli Liu et al.
SMART MATERIALS AND STRUCTURES (2015)
Designing bioinspired composite reinforcement architectures via 3D magnetic printing
Joshua J. Martin et al.
NATURE COMMUNICATIONS (2015)
A simple and high-resolution stereolithography-based 3D bioprinting system using visible light crosslinkable bioinks
Zongjie Wang et al.
BIOFABRICATION (2015)
A review of melt extrusion additive manufacturing processes: I. Process design and modeling
Brian N. Turner et al.
RAPID PROTOTYPING JOURNAL (2014)
Experimental investigation of FDM process for improvement of mechanical properties and production cost
Ismail Durgun et al.
RAPID PROTOTYPING JOURNAL (2014)
Using a magnetite/thermoplastic composite in 3D printing of direct replacements for commercially available flow sensors
S. J. Leigh et al.
SMART MATERIALS AND STRUCTURES (2014)
3D-printed magnetic Fe3O4/MBG/PCL composite scaffolds with multifunctionality of bone regeneration, local anticancer drug delivery and hyperthermia
Jianhua Zhang et al.
JOURNAL OF MATERIALS CHEMISTRY B (2014)
High-speed multiphoton absorption polymerization: fabrication of microfluidic channels with arbitrary cross-sections and high aspect ratios
George Kumi et al.
LAB ON A CHIP (2010)
Selective laser sintering of porous tissue engineering scaffolds from poly(L)/carbonated hydroxyapatite nanocomposite microspheres
Wen You Zhou et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2008)
Near-infrared photonic crystals with higher-order bandgaps generated by two-photon photopolymerization
M Straub et al.
OPTICS LETTERS (2002)