☆ 4.7 Article

Mechanochemical Treatment in High-Shear Thermokinetic Mixer as an Alternative for Tire Recycling

POLYMERS (2022)

Related references

Note: Only part of the references are listed.

Article Polymer Science

Towards Circular Economy by the Valorization of Different Waste Subproducts through Their Incorporation in Composite Materials: Ground Tire Rubber and Chicken Feathers

Xavier Colom et al.

Summary: Incorporation of residua into polymeric composites is an effective approach to creating materials suitable for specific applications, promoting a circular economy. The study found that elastomeric (Ground Tire Rubber) and biogenic (chicken feathers) wastes can be used as reinforcement materials, and the polymeric matrix EVA shows better compatibility with both materials compared to HDPE and PP matrices. Composites reinforced with GTR exhibit better acoustic properties due to the morphology of the reinforcing particles.

POLYMERS (2022)

Add to Collection

Article Engineering, Environmental

Waste tire rubber devulcanization technologies: State-of-the-art, limitations and future perspectives

Paulina Wisniewska et al.

Summary: Waste tire management is a major global environmental issue, and finding low-cost and industrial-scale tire recycling methods is gaining more attention. The sustainable development of rubber devulcanization technologies and the appropriate design of cradle-to-cradle loops for rubber goods are considered promising strategies for achieving a higher level of rubber recycling. This work presents an overview of patented waste tire rubber devulcanization technologies and discusses their performance characteristics, environmental aspects, and limitations. The findings show that the reclaimed rubbers described in patents have higher tensile strength and elongation break compared to literature data or commercial products, with significant differences attributed to devulcanization efficiency and rubber treatment conditions. Considering environmental and economic aspects, reactive extrusion is identified as the most promising method for further developing rubber devulcanization technologies.

WASTE MANAGEMENT (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Recycling NR/SBR waste using probe sonication as a new devulcanizing method; study on influencing parameters

Marzieh Shabani et al.

Summary: The devulcanization of a vulcanized blend of natural rubber (NR) and styrene butadiene rubber (SBR) was achieved using probe sonication. Pre-immersion in oil significantly increased the devulcanization percent. The use of VitaX as a devulcanizing agent resulted in higher devulcanization percent and improved re-vulcanization speed.

RSC ADVANCES (2022)

Add to Collection

Review Environmental Sciences

Current progress in waste tire rubber devulcanization

Ricky Saputra et al.

Summary: The rubber industry has evolved to meet global demands, with focus on the recovery and regeneration of waste tire rubber. Various devulcanization methods have been explored to selectively cleave vulcanizate's crosslinks while retaining polymeric networks, offering new sustainability pathways and economic opportunities.

CHEMOSPHERE (2021)

Add to Collection

Article Polymer Science

Effective thermomechanical devulcanization of ground tire rubber with a co-rotating twin-screw extruder

Daniel Abel Simon et al.

Summary: In this study, thermomechanical devulcanization of ground tire rubber was conducted in a co-rotating twin-screw extruder at different barrel temperatures and screw speeds. The results showed that selective cross-link scission can be achieved without severe degradation of the main chains under certain conditions. Additionally, utilizing a two-step mixing process for preparing rubber mixtures based on natural rubber can improve mechanical properties.

POLYMER DEGRADATION AND STABILITY (2021)

Add to Collection

Article Polymer Science

Poly (Lactic Acid)/Ground Tire Rubber Blends Using Peroxide Vulcanization

Nicolas Candau et al.

Summary: By using Dicumyl peroxide (DCP) as a crosslinking agent, recycling waste tire rubber (GTR) with poly (lactic acid) (PLA) can improve the toughness and impact strength of the material. Grinding GTR can enhance the performance of the blend, with the finest GTR showing the best improvement in tensile strength, modulus, strain at break, energy at break, and impact strength compared to neat PLA.

POLYMERS (2021)

Add to Collection

Article Multidisciplinary Sciences

Devulcanization of ground tire rubber: microwave and thermomechanical approaches

Daniel Abel Simon et al.

SCIENTIFIC REPORTS (2020)

Add to Collection

Article Chemistry, Physical

Preliminary Investigation on Auto-Thermal Extrusion of Ground Tire Rubber

Lukasz Zedler et al.

MATERIALS (2019)

Add to Collection

Article Engineering, Industrial

Thermo-mechanical recycling of rubber: Relationship between material properties and specific mechanical energy

Rodrigo Diaz et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)

Add to Collection

Article Polymer Science

Synergistic Effects of Bitumen Plasticization and Microwave Treatment on Short-Term Devulcanization of Ground Tire Rubber

Lukasz Zedler et al.

POLYMERS (2018)

Add to Collection

Article Thermodynamics

Use and misuse of logistic equations for modeling chemical kinetics

Alan K. Burnham

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2017)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

A comparative study of ground tire rubber devulcanization using twin screw extruder and internal mixer

O. Ujianto et al.

INNOVATION IN POLYMER SCIENCE AND TECHNOLOGY 2016 (IPST 2016) (2017)

Add to Collection

Article Polymer Science

Quantifying and comparing the selectivity for crosslink scission in mechanical and mechanochemical devulcanization processes

Devon William Edwards et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2016)

Add to Collection

Article Polymer Science

Devulcanization of ground tire rubber: Physical and chemical changes after different microwave exposure times

P. S. Garcia et al.

EXPRESS POLYMER LETTERS (2015)

Add to Collection

Article Polymer Science

Characterization and supercritical CO2 devulcanization of cryo-ground tire rubber: Influence of devulcanization process on reclaimed material

Ivan Mangili et al.

POLYMER DEGRADATION AND STABILITY (2014)

Add to Collection

Article Polymer Science

The effect of devulcanization level on mechanical properties of reclaimed rubber by thermal-mechanical shearing devulcanization

Guoliang Tao et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2013)

Add to Collection

Article Materials Science, Multidisciplinary

Crosslinking Kinetics of Blends of Ethylene Vinyl Acetate and Ground Tire Rubber

O. Bianchi et al.

JOURNAL OF ELASTOMERS AND PLASTICS (2009)

Add to Collection

Article Materials Science, Multidisciplinary

New Reclaiming Process of Thermoset Polyurethane Foam and Blending with Polyamide-12 and Thermoplastic Polyurethane

L. B. Gonella et al.

JOURNAL OF ELASTOMERS AND PLASTICS (2009)

Add to Collection

Article Polymer Science

Compounding of nanocomposites by thermokinetic mixing

TG Gopakumar et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2005)

Add to Collection

Article Materials Science, Biomaterials

Characterization of EVA residues from the shoe industry and post-consumer urban-waste polyethylenes

AJ Zattera et al.

CELLULAR POLYMERS (2005)

Add to Collection

Article Polymer Science

Mechanochemical surface activation of ground tire rubber by solid-state devulcanization and grafting

F Cavalieri et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2003)

Add to Collection

Article Polymer Science

Ultrasonic devulcanization of unfilled SBR under static and continuous conditions

CK Hong et al.

RUBBER CHEMISTRY AND TECHNOLOGY (2002)

Add to Collection

© Peeref 2019-2024. All rights reserved.