4.7 Article

Water-Processed Organic Solar Cell with Efficiency Exceeding 11%

Related references

Note: Only part of the references are listed.
Article Materials Science, Multidisciplinary

High-efficiency organic photovoltaic cells processed using a non-halogen solvent

Yang-Yen Yu et al.

Summary: This paper describes high-performance PM6:BTP-eC9-based organic photovoltaic (OPV) cells prepared using non-halogen solvents. Three green solvents were investigated as replacements for chloroform. The optoelectronic properties of the blend films and their respective devices were optimized and analyzed. The OPV cell prepared with toluene as the solvent and 1,8-diiodooctane (DIO) as the additive showed the best performance.

MATERIALS CHEMISTRY AND PHYSICS (2022)

Article Chemistry, Physical

Single-junction organic solar cells with over 19% efficiency enabled by a refined double-fibril network morphology

Lei Zhu et al.

Summary: Morphological control of donor and acceptor domains is crucial for efficient organic photovoltaics, and this study demonstrates a double-fibril network strategy to achieve a high power conversion efficiency of 19.3%.

NATURE MATERIALS (2022)

Article Polymer Science

Amphiphilic PTB7-Based Rod-Coil Block Copolymer for Water-Processable Nanoparticles as an Active Layer for Sustainable Organic Photovoltaic: A Case Study

Marianna Diterlizzi et al.

Summary: A new rod-coil block copolymer was synthesized, and water-processable nanoparticles with a unique internal morphology were prepared. The nanoparticles showed higher efficiency in organic solar cells compared to devices fabricated with traditional copolymers.

POLYMERS (2022)

Article Chemistry, Physical

Boosts charge utilization and enables high performance organic solar cells by marco- and micro- synergistic method

Shuai Zhang et al.

Summary: In this study, an insulating polymer with high relative dielectric constant was introduced into the ternary active layers of organic solar cells (OSCs) to improve their performance by enhancing light utilization and interface modulation.

NANO ENERGY (2022)

Review Chemistry, Multidisciplinary

Chemical Aspects of Human and Environmental Overload with Fluorine

Jianlin Han et al.

Summary: This comprehensive review focuses on the effects of fluoride ions and organofluorine compounds on human health and the environment, as well as related topics including the reasons for the advancement of fluorine-containing pharmaceuticals and agrochemicals, metabolism of fluorinated drugs, withdrawn fluorinated drugs, natural sources of fluorine compounds in the environment, sources of fluoride intake, and biomarkers of fluoride exposure.

CHEMICAL REVIEWS (2021)

Article Chemistry, Multidisciplinary

17.6%-Efficient Quasiplanar Heterojunction Organic Solar Cells from a Chlorinated 3D Network Acceptor

Hui Chen et al.

Summary: By utilizing the quasiplanar heterojunction (Q-PHJ) structure, an organic solar cell (OSC) based on BTIC-BO-4Cl demonstrates high efficiency comparable to traditional bulk heterojunction (BHJ) OSCs. This study suggests that the Q-PHJ architecture is suitable for specific donors and acceptors, offering an alternative approach to photovoltaic material design and device fabrication.

ADVANCED MATERIALS (2021)

Article Chemistry, Multidisciplinary

Single-Junction Organic Photovoltaic Cell with 19% Efficiency

Yong Cui et al.

Summary: By combining material design and ternary blending strategy, a maximum power conversion efficiency of 19.0% is achieved in single-junction OPV cells. Optimized active layer structure significantly improves the photovoltaic parameters, enhancing the performance and PCE values of the cells.

ADVANCED MATERIALS (2021)

Article Materials Science, Multidisciplinary

Dithienobenzoxadiazole-based wide bandgap donor polymers with strong aggregation properties for the preparation of efficient as-cast non-fullerene polymer solar cells processed using a non-halogenated solvent

Haiying Jiang et al.

Summary: This study synthesized three dithienobenzoxadiazole-based wide bandgap polymers to investigate the relationship between their backbone structure and photovoltaic performance. By processing with non-halogenated solvents, different power conversion efficiencies were obtained, with PBOffDT showing the highest efficiency due to its deep HOMO level and ordered crystallinity.

JOURNAL OF MATERIALS CHEMISTRY C (2021)

Article Chemistry, Multidisciplinary

Single-Junction Organic Photovoltaic Cells with Approaching 18% Efficiency

Yong Cui et al.

ADVANCED MATERIALS (2020)

Article Materials Science, Multidisciplinary

Water-Processed Organic Solar Cells with Open-Circuit Voltages Exceeding 1.3V

Varun Vohra et al.

COATINGS (2020)

Article Chemistry, Physical

Building intermixed donor-acceptor architectures for water-processable organic photovoltaics

Melissa Marks et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2019)

Article Polymer Science

Aqueous PCDTBT:PC71BM Photovoltaic Inks Made by Nanoprecipitation

Geoffrey Prunet et al.

MACROMOLECULAR RAPID COMMUNICATIONS (2018)

Article Nanoscience & Nanotechnology

Aqueous Nanoparticle Polymer Solar Cells: Effects of Surfactant Concentration and Processing on Device Performance

Fallon J. M. Colberts et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Review Chemistry, Multidisciplinary

The future of organic photovoltaics

Katherine A. Mazzio et al.

CHEMICAL SOCIETY REVIEWS (2015)

Article Nanoscience & Nanotechnology

Non-invasive multimodal functional imaging of the intestine with frozen micellar naphthalocyanines

Yumiao Zhang et al.

NATURE NANOTECHNOLOGY (2014)

Article Chemistry, Multidisciplinary

Nongeminate Recombination and Charge Transport Limitations in Diketopyrrolopyrrole-Based Solution-Processed Small Molecule Solar Cells

Christopher M. Proctor et al.

ADVANCED FUNCTIONAL MATERIALS (2013)

Article Multidisciplinary Sciences

Ultrathin and lightweight organic solar cells with high flexibility

Martin Kaltenbrunner et al.

NATURE COMMUNICATIONS (2012)

Article Chemistry, Physical

Identifying the Nature of Charge Recombination in Organic Solar Cells from Charge-Transfer State Electroluminescence

Gert-Jan A. H. Wetzelaer et al.

ADVANCED ENERGY MATERIALS (2012)

Article Chemistry, Physical

Phase-Dependent Photocurrent Generation in Polymer/Fullerene Bulk Heterojunction Solar Cells

Thomas J. K. Brenner et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2011)

Article Chemistry, Physical

Fabrication of Polymer Solar Cells Using Aqueous Processing for All Layers Including the Metal Back Electrode

Roar Sondergaard et al.

ADVANCED ENERGY MATERIALS (2011)

Article Materials Science, Multidisciplinary

Recombination in polymer-fullerene bulk heterojunction solar cells

Sarah R. Cowan et al.

PHYSICAL REVIEW B (2010)

Article Biochemistry & Molecular Biology

Utilizing temperature-sensitive association of Pluronic F-127 with lipid bilayers to control liposome-cell adhesion

P Chandaroy et al.

BIOCHIMICA ET BIOPHYSICA ACTA-BIOMEMBRANES (2002)

Article Chemistry, Multidisciplinary

Stable colloidal dispersions of fullerenes in polar organic solvents

RG Alargova et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2001)