☆ 4.7 Article

Thermal Stability, Mechanical Properties and Ceramization Mechanism of Epoxy Resin/Kaolin/Quartz Fiber Ceramifiable Composites

POLYMERS (2022)

Related references

Note: Only part of the references are listed.

Article Thermodynamics

A novel ceramifiable epoxy composite with enhanced fire resistance and flame retardance

Dong Zhao et al.

Summary: A novel epoxy composite with flame retardance and fire resistance was successfully prepared by incorporating silicate glass frit (SGF) and ammonium polyphosphate (APP) into the epoxy resin. The composite exhibited excellent flame retardance, with lower heat release rate, total heat release, and total smoke production compared to the pure epoxy resin. The unique phase separation and crystallization reactions at high temperatures, investigated through various analytical techniques, were found to significantly improve the fire resistance of the epoxy composite.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2022)

Add to Collection

Article Materials Science, Composites

Experimental Investigation on Low-Velocity Impact Performance of 3D Woven Textile Composites

Yajun Liu et al.

Summary: The objective of this experimental study is to develop impact-resistant 3D woven textile-reinforced composites and clarify the relationship between woven structure, mechanical performance, and failure mode. Six types of 3D woven structures with different binder-yarn paths were designed and manufactured using a modified heddle position system on a self-built 3D weaving loom. Low-velocity drop-weight impact tests were conducted on the composites to study the effect of woven structure on their out-of-plane mechanical performance. The optimal structure was found to be the through-thickness angle-interlock woven structure for a quasi-penetration energy of 30 J. The results also showed that the woven structure has a significant influence on the failure mode, with angle-interlock woven structures exhibiting limited delamination failure and maintaining structural integrity after impact.

APPLIED COMPOSITE MATERIALS (2022)

Add to Collection

Article Materials Science, Composites

Comparison of Tensile Properties of Carbon Fiber, Basalt Fiber and Hybrid Fiber Reinforced Composites Under Various Strain Rates

Yuanheng Yao et al.

Summary: CFRE, BFRE, and their mixtures show strain rate sensitivity. In the quasi-static state, the peak forces of the hybrid structures are between BFRE and CFRE, while in the dynamic state, the mechanical properties of the hybrid structures are worse than BFRE and CFRE. The hybrid composites are also sensitive to strain rates.

APPLIED COMPOSITE MATERIALS (2022)

Add to Collection

Article Polymer Science

Imidazole substituted benzothiadiazole derivatives as latent curing agent for epoxy thermosetting resin

Jie Zhang et al.

Summary: This study developed a new imidazole thermal latent curing agent, BTD-MZ(2), and investigated its effects on the curing behavior and storage time of EP system. The results showed that BTD-MZ(2) had a good latent period at low temperature and promoted the curing reaction of EP. Additionally, BTD-MZ(2) could be used as a co-curing agent for EP.

JOURNAL OF APPLIED POLYMER SCIENCE (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Silicone-grafted epoxy/carbon fiber composites with superior mechanical/ablation performance

Youquan Ling et al.

Summary: The study demonstrates that silicone-grafted epoxy/CF composites have the potential to enhance mechanical properties and ablation resistance.

MATERIALS CHEMISTRY AND PHYSICS (2022)

Add to Collection

Article Materials Science, Composites

Flexural Behaviour of Unreinforced and Z-Fibre Reinforced 3D Carbon/Epoxy Composites

Gaye Kaya et al.

Summary: The study revealed that Z-fibre reinforcement reduced the flexural strength and modulus of 3D carbon/epoxy composites, but improved toughness. Although Z-fibre reinforcement resulted in a decrease in composite density, the damage was more progressive, enhancing damage tolerance.

APPLIED COMPOSITE MATERIALS (2022)

Add to Collection

Article Polymer Science

Preparation of a Ceramifiable Phenolic Foam and Its Ceramization Behavior

Kaihong Tang et al.

Summary: Ceramifiable phenolic foam (GC-PF) with low ceramization temperature was prepared by incorporating low melting point glass frits into a phenolic resin matrix. GC-PF exhibited excellent thermal stability and flame retardancy.

POLYMERS (2022)

Add to Collection

Article Materials Science, Ceramics

ZrO2f-coated Cf hybrid fibrous reinforcements and properties of their reinforced ceramicizable phenolic resin matrix composites

Zhenyue Zou et al.

Summary: The ZrO2f/C-f hybrid fibrous reinforcements showed good thermal stability and high oxidation resistance, resulting in ceramicizable composites with excellent bending strength at high temperatures. The composites exhibited a weight loss rate of only 21% and a bending strength as high as 39 MPa after 12 minutes of ablation at 1400 degrees Celsius.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Thermal properties, oxidation corrosion behavior, and the in situ ceramization mechanism of SiB6@BPR/HF composites under high-temperature corrosion

Zhenyue Zou et al.

Summary: The SiB6 @BPR/HF composites exhibit high resistance to oxidation and corrosion at high temperatures, primarily due to the formation of Si-B-C-O ceramics.

CORROSION SCIENCE (2021)

Add to Collection

Article Polymer Science

Thermal Degradation Behavior of Epoxy Resin Containing Modified Carbon Nanotubes

Xiaohui Bao et al.

Summary: The research showed that the flame retardant CNTs-PMDA significantly improves the flame retardancy of epoxy resin and forms a residue char layer during thermal degradation. Additionally, the functionalization of CNTs with PMDA enhances the dispersion of CNTs in the epoxy resin matrix.

POLYMERS (2021)

Add to Collection

Article Materials Science, Ceramics

The thermal transformation process and mechanical strength evolution of ceramifiable silicone composites

Jian Yang et al.

Summary: This study investigates the thermal transformation process and the effect of modification on the mechanical properties of ceramifiable silicone composites. It was found that modification with 8AP-POSS can reduce gas release rate and improve the adhesion of ceramics. The research results provide insights for the preparation of high-performance silicone composites.

CERAMICS INTERNATIONAL (2021)

Add to Collection

Article Materials Science, Composites

Mechanical, microstructural, and thermal characterization insights of pyrolyzed carbon black from waste tires reinforced epoxy nanocomposites for coating application

Akarsh Verma et al.

POLYMER COMPOSITES (2020)

Add to Collection

Review Materials Science, Composites

Thermal and dielectric properties of nanocomposites prepared from reactive graphene oxide and silicon-containing cycloaliphatic diepoxide

Yida Liu et al.

POLYMER COMPOSITES (2020)

Add to Collection

Article Materials Science, Composites

The effect of fibre content on properties of ceramifiable composites

Zhuangzhuang Li et al.

PLASTICS RUBBER AND COMPOSITES (2020)

Add to Collection

Article Polymer Science

Effects of Zirconium Silicide on the Vulcanization, Mechanical and Ablation Resistance Properties of Ceramifiable Silicone Rubber Composites

Jiuqiang Song et al.

POLYMERS (2020)

Add to Collection

Article Engineering, Electrical & Electronic

Improvement in anti-static property and thermal conductivity of epoxy resin by doping graphene

Jiawei Zhang et al.

IEEE TRANSACTIONS ON DIELECTRICS AND ELECTRICAL INSULATION (2020)

Add to Collection

Article Polymer Science

Study on thermal degradation mechanism of heat-resistant epoxy resin modified with carboranes

Meili Cui et al.

POLYMER DEGRADATION AND STABILITY (2020)

Add to Collection

Review Materials Science, Composites

Polymer-based ceramifiable composites for flame retardant applications: A review

Ying-Ming Li et al.

COMPOSITES COMMUNICATIONS (2020)

Add to Collection

Article Polymer Science

Thermal stability and flame retardancy of an epoxy resin modified with phosphoric triamide and glycidyl POSS

Jialiang Li et al.

HIGH PERFORMANCE POLYMERS (2019)

Add to Collection

Article Thermodynamics

Kinetic analysis of sinter-crystallization of mullite and cristobalite from kaolinite

Tomas Ondro et al.

THERMOCHIMICA ACTA (2019)

Add to Collection

Article Polymer Science

Influence of Filler Content and Filler Size on the Curing Kinetics of an Epoxy Resin

Yang Zhao et al.

POLYMERS (2019)

Add to Collection

Article Materials Science, Composites

Si3N4@RGO Hybrids for Epoxy Coatings With Enhanced Anticorrosion Performance

Heyi Ge et al.

POLYMER COMPOSITES (2019)

Add to Collection

Article Chemistry, Applied

Synthesis of highly branched polymethylphenylsiloxane grafted epoxy resin copolymer for high efficiency ablation thermal protection coating

Boqian Li et al.

PROGRESS IN ORGANIC COATINGS (2019)

Add to Collection

Article Multidisciplinary Sciences

Evaluation of Epoxy Resin Thermal Degradation and its Effect on Preventing Sustained Casing Pressure in Oil and Gas Wells

Abdullah Al-Yami et al.

ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING (2019)

Add to Collection

Article Materials Science, Composites

Evaluation of bisphenol A-based epoxy resin containing multiwalled carbon nanotubes to improve resistance to degradation

Sameer A. Awad et al.

JOURNAL OF COMPOSITE MATERIALS (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Fluxing Agents on Ceramification of Composites of MgO-Al2O3-SiO2/Boron Phenolic Resin

Shi Minxian et al.

JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION (2018)

Add to Collection

Article Materials Science, Characterization & Testing

Effects of accelerated weathering on the chemical, mechanical, thermal and morphological properties of an epoxy/multi-walled carbon nanotube composite

Sameer A. Awad et al.

POLYMER TESTING (2018)

Add to Collection

Article Polymer Science

Theoretical Study on Decomposition Mechanism of Insulating Epoxy Resin Cured by Anhydride

Xiaoxing Zhang et al.

POLYMERS (2017)

Add to Collection

Article Materials Science, Composites

Synthesis, characterization and dielectric properties of surface functionalized ferroelectric ceramic/epoxy resin composites with high dielectric permittivity

Bingcheng Luo et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Dry sliding wear behavior of SiC/Al2O3 filled jute/epoxy composites

K. Sabeel Ahmed et al.

MATERIALS & DESIGN (2012)

Add to Collection

© Peeref 2019-2024. All rights reserved.