Related references
Note: Only part of the references are listed.Simulation-based roadmap for the integration of poly-silicon on oxide contacts into screen-printed crystalline silicon solar cells
Christian N. Kruse et al.
SCIENTIFIC REPORTS (2021)
Effects of CdTe selenization on the electrical properties of the absorber for the fabrication of CdSexTe1-x/CdTe based solar cells
Elisa Artegiani et al.
SOLAR ENERGY (2021)
Numerical Modelling Analysis for Carrier Concentration Level Optimization of CdTe Heterojunction Thin Film-Based Solar Cell with Different Non-Toxic Metal Chalcogenide Buffer Layers Replacements: Using SCAPS-1D Software
Samer H. Zyoud et al.
CRYSTALS (2021)
Quo Vadis Solar Energy Research?
Miguel Angel Reyes-Belmonte
APPLIED SCIENCES-BASEL (2021)
Numerical Design of Ultrathin Hydrogenated Amorphous Silicon-Based Solar Cell
F. X. Abomo Abega et al.
INTERNATIONAL JOURNAL OF PHOTOENERGY (2021)
Design of a highly efficient CdTe-based dual-heterojunction solar cell with 44% predicted efficiency
Abdul Kuddus et al.
SOLAR ENERGY (2021)
Investigation of thin-film p-BaSi2/n-CdS heterostructure towards semiconducting silicide based high efficiency solar cell
Md. Mahabub Alam Moon et al.
PHYSICA SCRIPTA (2020)
Areca catechu extracted natural new sensitizer for dye-sensitized solar cell: performance evaluation
Asmaa Soheil Najm et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2020)
Design and Simulation of FeSi2-Based Novel Heterojunction Solar Cells for Harnessing Visible and Near-Infrared Light
Md Mahabub Alam Moon et al.
PHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE (2020)
Numerical simulation of heat distribution in RGO-contacted perovskite solar cells using COMSOL
Soma Zandi et al.
SOLAR ENERGY (2020)
Effect of absorber layer, hole transport layer thicknesses, and its doping density on the performance of perovskite solar cells by device simulation
Atanu Bag et al.
SOLAR ENERGY (2020)
Performance enhancement of CIGS-based solar cells by incorporating an ultrathin BaSi2 BSF layer
Sayed Rezwanul Islam Biplab et al.
JOURNAL OF COMPUTATIONAL ELECTRONICS (2020)
Critical assessment of CuZn39Pb2 processing maps
Jing Yin et al.
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH (2020)
Design and optimization of 26.3% efficient perovskite/FeSi2monolithic tandem solar cell
Anisha Pathania et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2020)
Enhancement of the performance of CdS/CdTe heterojunction solar cell using TiO2/ZnO bi-layer ARC and V2O5 BSF layers: A simulation approach☆
Abdul Kuddus et al.
EUROPEAN PHYSICAL JOURNAL-APPLIED PHYSICS (2020)
Towards high efficiency Cd-Free Sb2Se3 solar cells by the band alignment optimization
Iman Gharibshahian et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2020)
An optimized lead-free formamidinium Sn -based perovskite solar cell design for high power conversion efficiency by SCAPS simulation
Manish Kumar et al.
OPTICAL MATERIALS (2020)
Numerical simulation of highly efficient lead-free all-perovskite tandem solar
Neelima Singh et al.
SOLAR ENERGY (2020)
A numerical simulation of high efficiency CdS/CdTe based solar cell using NiO HTL and ZnO TCO
Shamim Ahmmed et al.
OPTIK (2020)
Numerical simulation of CIGS, CISSe and CZTS-based solar cells with In2S3 as buffer layer and Au as back contact using SCAPS 1D
Md Ali Ashraf et al.
ENGINEERING RESEARCH EXPRESS (2020)
Influence of thickness variation of gamma-irradiated DSSC photoanodic TiO2 film on structural, morphological and optical properties
M. Khalid Hossain et al.
OPTIK (2019)
Study and analysis of the morphological, elemental and electrical properties of phosphorus doped monocrystalline silicon solar cell
S. Biswas et al.
MATERIALS RESEARCH EXPRESS (2019)
An optimized perovskite solar cell designs for high conversion efficiency
Abdelkader Hima et al.
SUPERLATTICES AND MICROSTRUCTURES (2019)
Effect of doping profile on sheet resistance and contact resistance of monocrystalline silicon solar cells
M. K. Basher et al.
MATERIALS RESEARCH EXPRESS (2019)
Solar cell efficiency tables (version 54)
Martin A. Green et al.
PROGRESS IN PHOTOVOLTAICS (2019)
Study and analysis the Cu nanoparticle assisted texturization forming low reflective silicon surface for solar cell application
M. K. Basher et al.
AIP ADVANCES (2019)
Role of facile synthesized V2O5 as hole transport layer for CdS/CdTe heterojunction solar cell: Validation of simulation using experimental data
Abdul Kuddus et al.
SUPERLATTICES AND MICROSTRUCTURES (2019)
Effect of surface texturization on minority carrier lifetime and photovoltaic performance of monocrystalline silicon solar cell
M. K. Basher et al.
OPTIK (2019)
Improved efficiency of Cu(In,Ga)Se2 thinfilm solar cells using a buffer layer alternative to CdS
Y. Z. Hamri et al.
SOLAR ENERGY (2019)
Solar cell efficiency tables (version 51)
Martin A. Green et al.
PROGRESS IN PHOTOVOLTAICS (2018)
A comparative study on the influence of pure anatase and Degussa-P25 TiO2 nanomaterials on the structural and optical properties of dye sensitized solar cell (DSSC) photoanode
M. Khalid Hossain et al.
OPTIK (2018)
Influence of natural dye adsorption on the structural, morphological and optical properties of TiO2 based photoanode of dye-sensitized solar cell
M. Khalid Hossain et al.
MATERIALS SCIENCE-POLAND (2018)
Study and investigation of phosphorus doping time on emitter region for contact resistance optimization of monocrystalline silicon solar cell
M. K. Basher et al.
RESULTS IN PHYSICS (2018)
Effect of pyramidal texturization on the optical surface reflectance of monocrystalline photovoltaic silicon wafers
M. K. Basher et al.
OPTIK (2018)
CdS/CdTe Heterostructures for Applications in Ultra-Thin Solar Cells
Karla Gutierrez Z-B et al.
MATERIALS (2018)
Impact of ionizing radiation doses on nanocrystalline TiO2 layer in DSSC's photoanode film
M. Khalid Hossain et al.
RESULTS IN PHYSICS (2018)
Critical review on sputter-deposited Cu2ZnSnS4 (CZTS) based thin film photovoltaic technology focusing on device architecture and absorber quality on the solar cells performance
Siarhei Zhuk et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2017)
Effect of dye extracting solvents and sensitization time on photovoltaic performance of natural dye sensitized solar cells
Md. Khalid Hossain et al.
RESULTS IN PHYSICS (2017)
Efficient amorphous silicon solar cells: characterization, optimization, and optical loss analysis
Wayesh Qarony et al.
RESULTS IN PHYSICS (2017)
Effect of back reflectors on photon absorption in thin-film amorphous silicon solar cells
Mohammad I. Hossain et al.
APPLIED NANOSCIENCE (2017)
Efficiency enhancement of natural dye sensitized solar cell by optimizing electrode fabrication parameters
M. Khalid Hossain et al.
MATERIALS SCIENCE-POLAND (2017)
Annealing temperature effect on structural, morphological and optical parameters of mesoporous TiO2 film photoanode for dye-sensitized solar cell application
M. Khalid Hossain et al.
MATERIALS SCIENCE-POLAND (2017)
Numerical modeling of a CdS/CdTe photovoltaic cell based on ZnTe BSF layer with optimum thickness of absorber layer
Rucksana Safa Sultana et al.
COGENT ENGINEERING (2017)
Efficiency enhancement of ultra-thin Cu(In,Ga)Se2 solar cells: optimizing the absorber bandgap profile by numerical device simulations
Xue Zheng et al.
CURRENT APPLIED PHYSICS (2016)
Renewable energy scenario in India: Opportunities and challenges
Souvik Sen et al.
JOURNAL OF AFRICAN EARTH SCIENCES (2016)
Numerical Analysis of In2S3 Layer Thickness, Band Gap and Doping Density for Effective Performance of a CIGS Solar Cell Using SCAPS
Nima Khoshsirat et al.
JOURNAL OF ELECTRONIC MATERIALS (2016)
Evaluation of photovoltaic properties of nanocrystalline-FeSi2/Si heterojunctions
Mahmoud Shaban et al.
SOLID-STATE ELECTRONICS (2016)
Electrochemical Deposition of CdTe Semiconductor Thin Films for Solar Cell Application Using Two-Electrode and Three-Electrode Configurations: A Comparative Study
O. K. Echendu et al.
ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2016)
β-FeSi2 as the bottom absorber of triple-junction thin-film solar cells: A numerical study
Yuan Ji-Ren et al.
CHINESE PHYSICS B (2014)
Fabrication of CdS/CdTe-Based Thin Film Solar Cells Using an Electrochemical Technique
I. M. Dharmadasa et al.
COATINGS (2014)
Advanced electrical simulation of thin film solar cells
Marc Burgelman et al.
THIN SOLID FILMS (2013)
Photovoltaic characteristics of p-β-FeSi2(Al)/n-Si(100) heterojunction solar cells and the effects of interfacial engineering
G. K. Dalapati et al.
APPLIED PHYSICS LETTERS (2011)
Computational design of high efficiency FeSi2 thin-film solar cells
Y. Gao et al.
THIN SOLID FILMS (2011)
Prospects of Back Surface Field Effect in Ultra-Thin High-Efficiency CdS/CdTe Solar Cells from Numerical Modeling
Nowshad Amin et al.
INTERNATIONAL JOURNAL OF PHOTOENERGY (2010)
CdTe thin film solar cells prepared by a low-temperature deposition method
V. D. Novruzov et al.
PHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE (2010)
Prospects of novel front and back contacts for high efficiency cadmium telluride thin film solar cells from numerical analysis
M. A. Matin et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2010)
Numerical simulation of CuInxGa1-xSe2 solar cells by AMPS-1D
A. Bouloufa et al.
THIN SOLID FILMS (2007)
FTO/ITO double-layered transparent conductive oxide for dye-sensitized solar cells
T Kawashima et al.
JOURNAL OF PHOTOCHEMISTRY AND PHOTOBIOLOGY A-CHEMISTRY (2004)
Share Paper
