☆ 4.7 Article

Heating influence on hierarchical structures fabricated by direct laser interference patterning

SCIENTIFIC REPORTS (2022)

Related references

Note: Only part of the references are listed.

Article Materials Science, Multidisciplinary

Fabrication of four-level hierarchical topographies through the combination of LIPSS and direct laser interference pattering on near-beta titanium alloy

Frederic Schell et al.

Summary: Complex repetitive periodic surface patterns were created on a near-beta Ti-13Nb-13Zr alloy using two-beam Direct Laser Interference Patterning (DLIP) with picosecond-pulsed laser sources at wavelengths of 355 nm, 532 nm, and 1064 nm. Various types of Laser-induced periodic surface structures (LIPSS) were observed, including low and high spatial frequency LIPSS, on top of line-like DLIP microstructures and quasi-periodic microstructures with periods greater than the laser wavelength. The feature size of the fabricated LIPSS could be adjusted by modifying laser process parameters.

MATERIALS LETTERS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

High throughput laser surface micro-structuring of polystyrene by combining direct laser interference patterning with polygon scanner technology

Fabian Raenke et al.

Summary: Laser-based processing techniques have been shown to be an effective option for modifying polymer surfaces. In this study, Direct Laser Interference Patterning combined with the polygon scanner technique was used to create textured polystyrene surfaces through ultra-fast beam deflection. The formation of line-like structures with a spatial period of 21.0 μm was achieved using a two-beam DLIP optical configuration. The scanning speed and repetition rate were found to influence the structure formation, with structure heights up to 23 μm. The formation of the micro-structure was attributed to swelling and ablation mechanisms. The method achieved a throughput of 1.1 m²/min for the first time by applying scanning speeds of 350 m/s.

MATERIALS LETTERS-X (2022)

Add to Collection

Article Chemistry, Physical

LIPSS and DLIP: From hierarchical to mutually interacting, homogeneous, structuring

A. Sikora et al.

Summary: This article reports an experimental study showing that it is possible to transition from a hierarchical to mutual interacting texturing where DLIP and LIPSS give rise to a novel, uniform texturing with a homogeneous morphology, highly regular periodicity, and low orientation dispersion. Furthermore, our approach allows for a significant reduction of the LIPSS period to approximately 0.45 lambda.

APPLIED SURFACE SCIENCE (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Fundamentals of Scanning Surface Structuring by Ultrashort Laser Pulses: From Electron Diffusion to Final Morphology

Fabian Nyenhuis et al.

Summary: The industrial use of ultrashort pulse surface structuring could be significantly increased by effectively utilizing the currently available average laser powers. However, the unexplained degradation of surfaces processed with numerous pulses at high average laser power poses a challenge. In this study, the underlying structure formation causing such surface degradation is investigated, and a hierarchical structural formation model is proposed to bridge the gap between laser-induced periodic surface structures and surface degradation. Contrary to previous research expectations, less structure formation was observed on titanium with higher laser fluences. Enhanced electron diffusion with increasing intensity is explored as a possible reason within the framework of the two-temperature model. These findings contribute to a deeper understanding of the microscopic mechanisms involved in surface structuring with ultrashort pulses.

ADVANCED PHOTONICS RESEARCH (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Atomistic simulation of the generation of vacancies in rapid crystallization of metals

Miao He et al.

Summary: Molecular dynamics simulations were used to investigate the generation of vacancies at a crystal-liquid interface under conditions of undercooling for bcc Cr and fcc Ni metals. The results show that the vacancy concentrations produced can exceed equilibrium values by orders of magnitude. Different trends in vacancy concentration with temperature for Ni and Cr are related to the temperature dependences of the crystallization front velocity predicted for the two metals.

ACTA MATERIALIA (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Generation of Supra-Wavelength Grooves in Femtosecond Laser Surface Structuring of Silicon

Jijil J. J. Nivas et al.

Summary: Extensive research has been conducted on laser-induced periodic surface structures (LIPSS), with a focus on sub-wavelength ripples and less on supra-wavelength grooves. This overview discusses recent investigations on the formation of grooves on crystalline silicon by femtosecond laser pulses, including the influence of various experimental parameters and possible mechanisms for groove formation.

NANOMATERIALS (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Signatures of self-interstitials in laser-melted and regrown silicon

T. Menold et al.

Summary: The study investigates epitaxially regrown silicon single crystals using photoluminescence spectroscopy, revealing the presence of self-interstitial clusters and supersaturated concentrations of self-interstitials within the regrown volume. Molecular dynamics simulations confirm that the recrystallization velocities lead to supersaturation of both self-interstitials and vacancies. An analytical model based on time-dependent nucleation theory explains the transition identified by photoluminescence spectroscopy.

AIP ADVANCES (2021)

Add to Collection

Article Physics, Applied

Ultrashort pulse surface melting and smoothing: The impact of pulse spacing on heat accumulation and structure formation

F. Nyenhuis et al.

Summary: Ultrashort laser pulses are commonly used in industrial manufacturing for their small heat-affected zones and low melt formation. A contrasting approach involves utilizing the residual heat from successively applied laser pulses to create a highly spatially and temporally confined melt film. Experiments, theoretical analysis, and numerical simulations are used to study the influence of laser parameters on pulsed melting and surface structure formation, with special attention to the temporal delay between pulses.

JOURNAL OF APPLIED PHYSICS (2021)

Add to Collection

Article Multidisciplinary Sciences

Real-space observation of surface structuring induced by ultra-fast-laser illumination far below the melting threshold

Ch. Zaum et al.

Summary: This study investigates atomic-scale changes on surfaces induced by low-energy density femtosecond laser pulses, revealing the creation of nanosized adatom and vacancy clusters. The theoretical analysis shows that the formation and motion of these clusters are non-thermal in nature. These findings not only enhance our understanding of how surfaces respond to laser illumination, but also pave the way for designing material properties through surface structuring.

SCIENTIFIC REPORTS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Tailoring submicrometer periodic surface structures via ultrashort pulsed direct laser interference patterning

F. Fraggelakis et al.

Summary: This study investigates the fundamental mechanisms for the formation of laser-induced topographies on stainless steel using DLIP and ULP, enhancing control over the structure and providing insights into the formation process.

PHYSICAL REVIEW B (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Design Rules for Laser-Treated Icephobic Metallic Surfaces for Aeronautic Applications

Vittorio Vercillo et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

Investigations on the oxidation phenomenon of SiC/SiC fabricated by high repetition frequency femtosecond laser

Zhaoyang Zhai et al.

APPLIED SURFACE SCIENCE (2020)

Add to Collection

Article Physics, Applied

Crystal defects in monocrystalline silicon induced by spot laser melting

T. Menold et al.

JOURNAL OF APPLIED PHYSICS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

The Role of the Laser-Induced Oxide Layer in the Formation of Laser-Induced Periodic Surface Structures

Camilo Florian et al.

NANOMATERIALS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

High-frequency periodic patterns driven by non-radiative fields coupled with Marangoni convection instabilities on laser-excited metal surfaces

A. Rudenko et al.

ACTA MATERIALIA (2020)

Add to Collection

Review Materials Science, Multidisciplinary

Laser engineering of biomimetic surfaces

E. Stratakis et al.

MATERIALS SCIENCE & ENGINEERING R-REPORTS (2020)

Add to Collection

Review Optics

Maxwell Meets Marangoni-A Review of Theories on Laser-Induced Periodic Surface Structures

Joern Bonse et al.

LASER & PHOTONICS REVIEWS (2020)

Add to Collection

Article Chemistry, Physical

Light absorption by surface nanoholes and nanobumps

A. Rudenko et al.

APPLIED SURFACE SCIENCE (2019)

Add to Collection

Article Chemistry, Physical

LIPSS on thin metallic films: New insights from multiplicity of laser-excited electromagnetic modes and efficiency of metal oxidation

Alexander Dostovalov et al.

APPLIED SURFACE SCIENCE (2019)

Add to Collection

Article Multidisciplinary Sciences

Fabrication of multifunctional titanium surfaces by producing hierarchical surface patterns using laser based ablation methods

Christoph Zwahr et al.

SCIENTIFIC REPORTS (2019)

Add to Collection

Article Engineering, Multidisciplinary

Cast surface texture characterisation via areal roughness

S. Pomberger et al.

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2019)

Add to Collection

Article Optics

Oxide composition and period variation of thermochemical LIPSS on chromium films with different thickness

A. V. Dostovalov et al.

OPTICS EXPRESS (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Topography Tuning for Plasmonic Color Enhancement via Picosecond Laser Bursts

Jean-Michel Guay et al.

ADVANCED OPTICAL MATERIALS (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Self-Arranged Periodic Nanovoids by Ultrafast Laser-Induced Near-Field Enhancement

Xxx Sedao et al.

ACS PHOTONICS (2018)

Add to Collection

Article Optics

Texturing metal surface with MHz ultra-short laser pulses

Fotis Fraggelakis et al.

OPTICS EXPRESS (2017)

Add to Collection

Article Engineering, Electrical & Electronic

Study of the formation of thermochemical laser-induced periodic surface structures on Cr, Ti, Ni and NiCr films under femtosecond irradiation

A. V. Dostovalov et al.

QUANTUM ELECTRONICS (2017)

Add to Collection

Article Multidisciplinary Sciences

In-situ high-resolution visualization of laser-induced periodic nanostructures driven by optical feedback

Alberto Aguilar et al.

SCIENTIFIC REPORTS (2017)

Add to Collection

Article Multidisciplinary Sciences

Ror2 signaling regulates Golgi structure and transport through IFT20 for tumor invasiveness

Michiru Nishita et al.

SCIENTIFIC REPORTS (2017)

Add to Collection

Article Multidisciplinary Sciences

Spontaneous periodic ordering on the surface and in the bulk of dielectrics irradiated by ultrafast laser: a shared electromagnetic origin

Anton Rudenko et al.

SCIENTIFIC REPORTS (2017)

Add to Collection

Article Chemistry, Physical

Influence of femtosecond laser produced nanostructures on biofilm growth on steel

Nadja Epperlein et al.

APPLIED SURFACE SCIENCE (2017)

Add to Collection

Review Optics

Laser interference patterning methods: Possibilities for high-throughput fabrication of periodic surface patterns

Andres Fabian Lasagni

ADVANCED OPTICAL TECHNOLOGIES (2017)

Add to Collection

Article Chemistry, Physical

One-step fabrication of near superhydrophobic aluminum surface by nanosecond laser ablation

R. Jagdheesh et al.

APPLIED SURFACE SCIENCE (2016)

Add to Collection

Article Optics

Heat accumulation in ultra-short pulsed scanning laser ablation of metals

Franziska Bauer et al.

OPTICS EXPRESS (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Coherence in ultrafast laser-induced periodic surface structures

Hao Zhang et al.

PHYSICAL REVIEW B (2015)

Add to Collection

Article Physics, Applied

Influence of substrate microcrystallinity on the orientation of laser-induced periodic surface structures

P. Nuernberger et al.

JOURNAL OF APPLIED PHYSICS (2015)

Add to Collection

Article Physics, Applied

Influence of crystal orientation on the formation of femtosecond laser-induced periodic surface structures and lattice defects accumulation

Xxx Sedao et al.

APPLIED PHYSICS LETTERS (2014)

Add to Collection

Article Physics, Applied

Modeling laser-induced periodic surface structures: Finite-difference time-domain feedback simulations

J. Z. P. Skolski et al.

JOURNAL OF APPLIED PHYSICS (2014)

Add to Collection

Review Optics

Direct femtosecond laser surface nano/microstructuring and its applications

Anatoliy Y. Vorobyev et al.

LASER & PHOTONICS REVIEWS (2013)

Add to Collection

Proceedings Paper Nanoscience & Nanotechnology

Optimization of the volume ablation rate for metals at different laser pulse-durations from ps to fs

Beat Neuenschwander et al.

LASER APPLICATIONS IN MICROELECTRONIC AND OPTOELECTRONIC MANUFACTURING (LAMOM) XVII (2012)

Add to Collection

Article Chemistry, Physical

Superhydrophobic surfaces: From natural to biomimetic to functional

Zhiguang Guo et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2011)

Add to Collection

Article Engineering, Mechanical

Direct Fabrication of Hierarchical Microstructures on Metals by Means of Direct Laser Interference Patterning

Matthias Bieda et al.

JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME (2010)

Add to Collection

Article Chemistry, Physical

Analysis of oxide formation induced by UV laser coloration of stainless steel

Z. L. Li et al.

APPLIED SURFACE SCIENCE (2009)

Add to Collection

Review Chemistry, Physical

A microscopic view of the electromagnetic properties of sub-λ metallic surfaces

P. Lalanne et al.

SURFACE SCIENCE REPORTS (2009)

Add to Collection

Article Materials Science, Multidisciplinary

Computational study of the generation of crystal defects in a bcc metal target irradiated by short laser pulses

Zhibin Lin et al.

PHYSICAL REVIEW B (2008)

Add to Collection

Article Materials Science, Multidisciplinary

Fluence dependence of femtosecond-laser-induced nanostructure formed on TiN and CrN

N Yasumaru et al.

APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2005)

Add to Collection

Article Physics, Applied

Structure formation on the surface of indium phosphide irradiated by femtosecond laser pulses

J Bonse et al.

JOURNAL OF APPLIED PHYSICS (2005)

Add to Collection

Article Microscopy

Radiation damage in the TEM and SEM

RF Egerton et al.

MICRON (2004)

Add to Collection

© Peeref 2019-2024. All rights reserved.