Related references
Note: Only part of the references are listed.An enhanced Johnson-Cook strength model for splitting strain rate and temperature effects on lower yield stress and plastic flow
Luca Gambirasio et al.
COMPUTATIONAL MATERIALS SCIENCE (2016)
High strain rate tensile behavior of Al-4.8Cu-1.2Mg alloy
Ravindranadh Bobbili et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Study of static recrystallization behavior in hot deformed Ni-based superalloy using cellular automaton model
Y. C. Lin et al.
MATERIALS & DESIGN (2016)
A physically-based constitutive model for a nitrogen alloyed ultralow carbon stainless steel
An He et al.
COMPUTATIONAL MATERIALS SCIENCE (2015)
A microstructure-based model for describing the material properties of Al-Zn alloys during high pressure torsion
M. Borodachenkova et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2015)
A three dimensional (3D) thermo-elasto-viscoplastic constitutive model for FCC polycrystals
Edward D. Cyr et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2015)
Coupled crystal plasticity - Probabilistic cellular automata approach to model dynamic recrystallization in magnesium alloys
E. Popova et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2015)
A new dislocation-density-function dynamics scheme for computational crystal plasticity by explicit consideration of dislocation elastic interactions
H. S. Leung et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2015)
Characterization of hot deformation behavior and processing map of FGH4096-GH4133B dual alloys
Yanhui Liu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
Work-hardening behaviors of typical solution-treated and aged Ni-based superalloys during hot deformation
Dong-Xu Wen et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
EBSD study of a hot deformed nickel-based superalloy
Y. C. Lin et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
Three-Dimensional Crystal Plasticity Finite Element Simulation of Hot Compressive Deformation Behaviors of 7075 Al Alloy
Lei-Ting Li et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2015)
The dynamic recrystallization evolution and kinetics of Ni-18.3Cr-6.4Co-5.9W-4Mo-2.19Al-1.16Ti superalloy during hot deformation
Hongbin Zhang et al.
JOURNAL OF MATERIALS RESEARCH (2015)
A unified physically based constitutive model for describing strain hardening effect and dynamic recovery behavior of a Ni-based superalloy
Y. C. Lin et al.
JOURNAL OF MATERIALS RESEARCH (2015)
Constitutive modeling for predicting peak stress characteristics during hot deformation of hot isostatically processed nickel-base superalloy
S. S. Satheesh Kumar et al.
JOURNAL OF MATERIALS SCIENCE (2015)
Deformation behavior of AA2017-SiCp in warm and hot deformation regions
S. Serajzadeh et al.
MATERIALS & DESIGN (2015)
Constitutive Modelling for elevated temperature flow behaviour of AA7075
D. Trimble et al.
MATERIALS & DESIGN (2015)
Constitutive modeling of hot deformation behavior of vacuum hot pressed Cu-8Cr-4Nb alloy
A. K. Shukla et al.
MATERIALS & DESIGN (2015)
Effect of strain rate on microstructure evolution of a nickel-based superalloy during hot deformation
Hongbin Zhang et al.
MATERIALS & DESIGN (2015)
The integrated influence on hot deformation of dual-phase titanium alloys incorporating dynamic recrystallization evolution and α/β phase transformation
H. Q. Liang et al.
MATERIALS LETTERS (2015)
Effects of initial aging time on processing map and microstructures of a nickel-based superalloy
Dong-Xu Wen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Effect of chemical composition and processing variables on the hot flow behavior of leaded brass alloys
A. Momeni et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Study of dynamic recrystallization in a Ni-based superalloy by experiments and cellular automaton model
Yan-Xing Liu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Competition between dynamic recovery and recrystallization during hot deformation for TC18 titanium alloy
Y. Q. Ning et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Modelling flow stress of AISI 316L at high strain rates
Dan Wedberg et al.
MECHANICS OF MATERIALS (2015)
Size effects and temperature dependence on strain-hardening mechanisms in some face centered cubic materials
E. Hug et al.
MECHANICS OF MATERIALS (2015)
Assessing and ensuring parameter identifiability for a physically-based strain hardening model for twinning-induced plasticity
M. Bambach et al.
MECHANICS OF MATERIALS (2015)
Flow stress model for IN718 accounting for evolution of strengthening precipitates during thermal treatment
M. Fisk et al.
COMPUTATIONAL MATERIALS SCIENCE (2014)
A physically-based constitutive model for a typical nickel-based superalloy
Y. C. Lin et al.
COMPUTATIONAL MATERIALS SCIENCE (2014)
A microstructure-sensitive constitutive modeling of the inelastic behavior of single crystal nickel-based superalloys at very high temperature
J. -B. le Graverend et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2014)
Characterization of stress-strain relationships in Al over a wide range of testing temperatures
Tamas Csanadi et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2014)
A modelling approach to yield strength optimisation in a nickel-base superalloy
D. M. Collins et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2014)
Multiscale modeling of hot-working with dynamic recrystallization by coupling microstructure evolution and macroscopic mechanical behavior
Tomohiro Takaki et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2014)
Hot Ductility of Incoloy 901 Produced by Vacuum Arc Remelting
Fatemeh Mohammad Shore et al.
ISIJ INTERNATIONAL (2014)
Effects of microstructure and γ′ distribution on the hot deformation behavior for a powder metallurgy superalloy FGH96
Chi Zhang et al.
JOURNAL OF MATERIALS RESEARCH (2014)
Hot deformation behavior of the 1.15C-4.00Cr-3.00V-6.00W-5.00Mo powder metallurgy high speed steel
Yanhui Liu et al.
MATERIALS & DESIGN (2014)
Metadynamic recrystallization behavior of AZ61 magnesium alloy
M. H. Maghsoudi et al.
MATERIALS & DESIGN (2014)
Constitutive models for high-temperature flow behaviors of a Ni-based superalloy
Y. C. Lin et al.
MATERIALS & DESIGN (2014)
Hot deformation behavior and processing map of a typical Ni-based superalloy
Dong-Xu Wen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Dynamic recrystallization behavior of new transformation-twinning induced plasticity steel
A. Marandi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
A comparative study on the capability of Johnson-Cook and Arrhenius-type constitutive equations to describe the flow behavior of Mg-6A1-1Zn alloy
A. Abbasi-Bani et al.
MECHANICS OF MATERIALS (2014)
Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions
Taku Sakai et al.
PROGRESS IN MATERIALS SCIENCE (2014)
Thermostatistical modelling of hot deformation in FCC metals
E. I. Galindo-Nava et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2013)
Dislocation density based model for plastic deformation and globularization of Ti-6Al-4V
Bijish Babu et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2013)
Crystal plasticity modeling of the dynamic recrystallization of two-phase titanium alloys during isothermal processing
Hongwei Li et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2013)
Prediction of flow stress in a wide temperature range involving phase transformation for as-cast Ti-6Al-2Zr-1Mo-1V alloy by artificial neural network
Guo-zheng Quan et al.
MATERIALS & DESIGN (2013)
A thermodynamic theory for dislocation cell formation and misorientation in metals
E. I. Galindo-Nava et al.
ACTA MATERIALIA (2012)
A characterization for the dynamic recrystallization kinetics of as-extruded 7075 aluminum alloy based on true stress-strain curves
Guo-zheng Quan et al.
COMPUTATIONAL MATERIALS SCIENCE (2012)
A thermostatistical theory of low and high temperature deformation in metals
E. I. Galindo-Nava et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Dislocation density evolution and interactions in crystalline materials
P. Shanthraj et al.
ACTA MATERIALIA (2011)
A critical review of experimental results and constitutive descriptions for metals and alloys in hot working
Y. C. Lin et al.
MATERIALS & DESIGN (2011)
Mesoscale simulation of the high-temperature austenitizing and dynamic recrystallization by coupling a cellular automaton with a topology deformation technique
Fei Chen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Constitutive modeling for elevated temperature flow behavior of 42CrMo steel
Y. C. Lin et al.
COMPUTATIONAL MATERIALS SCIENCE (2008)
Strain gradient plasticity modelling of high-pressure torsion
Y. Estrin et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2008)
Dislocations, vacancies and solute diffusion in physical based plasticity model for AISI 316L
Lars-Erik Lindgren et al.
MECHANICS OF MATERIALS (2008)
A physically based microstructure model for predicting the microstructural evolution of a C-Mn steel during and after hot deformation
Goran Engberg et al.
STEEL RESEARCH INTERNATIONAL (2008)
Coupled quantitative simulation of microstructural evolution and plastic flow during dynamic recrystallization
R Ding et al.
ACTA MATERIALIA (2001)
Share Paper
