Related references
Note: Only part of the references are listed.Interfacial microstructure between ultrahigh-performance concrete-normal concrete in fresh-on-fresh casting
Shaoyan Liu et al.
CONSTRUCTION AND BUILDING MATERIALS (2022)
Effects of fibers on the mechanical properties of UHPC: A review
Jian Yang et al.
JOURNAL OF TRAFFIC AND TRANSPORTATION ENGINEERING-ENGLISH EDITION (2022)
Effect of severe chloride environment on the flexural behaviour of hybrid concrete systems
Luaay Hussein et al.
MAGAZINE OF CONCRETE RESEARCH (2020)
Electrical and microstructural analysis of UHPC containing short PVA fibers
S. H. Ghasemzadeh Mosavinejad et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Interfacial bond properties between normal strength concrete substrate and ultra-high performance concrete as a repair material
Yang Zhang et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Flexural strengthening of reinforced concrete beams or slabs using ultra-high performance concrete (UHPC): A state of the art review
Yanping Zhu et al.
ENGINEERING STRUCTURES (2020)
Functionally graded concrete: Design objectives, production techniques and analysis methods for layered and continuously graded elements
Giacomo Torelli et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Wet casting of multiple mix horizontally layered concrete elements
Andre Brault et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Calcined Clay as Supplementary Cementitious Material
Roman Jaskulski et al.
MATERIALS (2020)
Eco-UHPC as Repair Material-Bond Strength, Interfacial Transition Zone and Effects of Formwork Type
Ankit Kothari et al.
MATERIALS (2020)
Experimental study on interfacial shear behaviour between ultra-high performance concrete and normal strength concrete in precast composite members
Jiabin Liu et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
The curing times effect on the strength of ground granulated blast furnace slag (GGBFS) mortar
Chin Mei Yun et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Empirical assessing cement CO2 emissions based on China's economic and social development during 2001-2030
Junxiao Wei et al.
SCIENCE OF THE TOTAL ENVIRONMENT (2019)
Fresh state stability of vertical layers of concrete
Giacomo Torelli et al.
CEMENT AND CONCRETE RESEARCH (2019)
Flexural behaviors and capacity prediction on damaged reinforcement concrete (RC) bridge deck strengthened by ultra-high performance concrete (UHPC) layer
Yang Zhang et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Effect of paste volume on fresh and hardened properties of concrete
S. H. Chu
CONSTRUCTION AND BUILDING MATERIALS (2019)
Grout-concrete interface bond performance: Effect of interface moisture on the tensile bond strength and grout microstructure
I. De la Varga et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Effect of Hybrid Fibers on Fresh Properties, Mechanical Properties, and Autogenous Shrinkage of Cost-Effective UHPC
Weina Meng et al.
JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2018)
The influence of slag properties, mix parameters and curing temperature on hydration and strength development of slag/cement blends
Abdelkader Bougara et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Calcined clay limestone cements (LC3)
Karen Scrivener et al.
CEMENT AND CONCRETE RESEARCH (2018)
Effect of very severe sulfate environment on bonded composite concrete system
Luaay Hussein et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Flexural strengthening of RC beams with prefabricated ultra high performance fibre reinforced concrete laminates
H. M. Tanarslan
ENGINEERING STRUCTURES (2017)
Functionally graded concrete: Numerical design methods and experimental tests of mass-optimized structural components
Michael Herrmann et al.
STRUCTURAL CONCRETE (2017)
Experimental Investigation and Prediction of Compressive Strength of Ultra-High Performance Concrete Containing Supplementary Cementitious Materials
Jisong Zhang et al.
ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2017)
Ecological Concrete Based on Blast-Furnace Cement with Incorporated Coarse Recycled Concrete Aggregate and Fly Ash Addition
Wojciech Kubissa et al.
JOURNAL OF RENEWABLE MATERIALS (2017)
Evaluation of bond strength between sand concrete as new repair material and ordinary concrete substrate (The surface roughness effect)
Karima Gadri et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Drying shrinkage and cracking resistance of concrete made with ternary cementitious components
Xiang Hu et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Ultra-High Performance Concrete: Mechanical Performance, Durability, Sustainability and Implementation Challenges
S. Abbas et al.
INTERNATIONAL JOURNAL OF CONCRETE STRUCTURES AND MATERIALS (2016)
Effect of Slag Cement on Drying Shrinkage of Concrete
Jiqiu Yuan et al.
ACI MATERIALS JOURNAL (2015)
Composition of C-S-H in pastes with increasing levels of silica fume addition
J. E. Rossen et al.
CEMENT AND CONCRETE RESEARCH (2015)
Evolution of pore structure in blended systems
E. Berodier et al.
CEMENT AND CONCRETE RESEARCH (2015)
Structural behavior of ultra-high performance fiber reinforced concrete-normal strength concrete or high strength concrete composite members
Luaay Hussein et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
Near-to-surface properties affecting bond strength in concrete repair
Luc Courard et al.
CEMENT & CONCRETE COMPOSITES (2014)
Durability and mechanical properties of high strength concrete incorporating ultra fine Ground Granulated Blast-furnace Slag
Susanto Teng et al.
CONSTRUCTION AND BUILDING MATERIALS (2013)
Characterization of the interfacial bond between old concrete substrate and ultra high performance fiber concrete repair composite
Bassam A. Tayeh et al.
MATERIALS AND STRUCTURES (2013)
Influence of curing regimes on compressive strength of ultra high performance concrete
Prabhat Ranjan Prem et al.
SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES (2013)
Mechanical properties of reactive powder concrete containing high volumes of ground granulated blast furnace slag
Halit Yazici et al.
CEMENT & CONCRETE COMPOSITES (2010)
Rheology of fiber reinforced cementitious materials: classification and prediction
Laetitia Martinie et al.
CEMENT AND CONCRETE RESEARCH (2010)
Reactive powder based concretes: Mechanical properties, durability and hybrid use with OPC
A. Cwirzen et al.
CEMENT AND CONCRETE RESEARCH (2008)
Fracture behavior of functionally graded concrete materials for rigid pavements
Jeffery Roesler et al.
TRANSPORTATION RESEARCH RECORD (2007)
Aggregate-cement paste transition zone properties affecting the salt-frost damage of high-performance concretes
A Cwirzen et al.
CEMENT AND CONCRETE RESEARCH (2005)
Fresh and hardened properties of self-consolidating concrete
D Bonen et al.
PROGRESS IN STRUCTURAL ENGINEERING AND MATERIALS (2005)
Industrially interesting approaches to low-CO2 cements
E Gartner
CEMENT AND CONCRETE RESEARCH (2004)
Backscattered electron imaging of cementitious microstructures: understanding and quantification
KL Scrivener
CEMENT & CONCRETE COMPOSITES (2004)
Latent hydraulic reactivity of blended cement incorporating slag made from municipal solid waste incinerator fly ash
KS Wang et al.
JOURNAL OF THE AIR & WASTE MANAGEMENT ASSOCIATION (2003)
The ITZ in concrete - a different view based on image analysis and SEM observations
S Diamond et al.
CEMENT & CONCRETE COMPOSITES (2001)