☆ 4.6 Article

The Effect of Carbon Content on the Microstructure and Mechanical Properties of Cemented Carbides with a CoNiFeCr High Entropy Alloy Binder

MATERIALS (2022)

Related references

Note: Only part of the references are listed.

Article Materials Science, Multidisciplinary

Effects of Nb and NbC additives on microstructure and properties of WC-Co-Ni cemented carbides

Tao Lin et al.

Summary: Cemented carbides (WC-Co-Ni) with the addition of Nb and NbC were prepared by powder metallurgy method. The microstructure and mechanical properties were analyzed. The results showed that the addition of Nb or NbC can reduce the grain size of WC. Nb has a stronger inhibitory effect on WC grain growth than NbC. The transverse fracture strength of the samples first increased and then decreased with the increase of Nb and NbC contents. The hardness of cemented carbides increased with the content of additives. The fracture toughness and impact toughness decreased with the increase of NbC and Nb contents.

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of the carbon content on the morphology evolution of the η phase in cemented carbides with the CoNiFeCr high entropy alloy binder

Cheng Qian et al.

Summary: The carbon content significantly affects the morphology of the eta phase, with an increase in carbon content leading to a decrease in the amount of eta phase and local aggregation, showing typical segregation. In addition, eta phase segregation results in an increase in hardness dispersion and a further decrease in toughness.

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

The Analysis of Erosive Wear Resistance of WC-Co Carbides Obtained by Spark Plasma Sintering Method

Joanna Wachowicz et al.

Summary: The study aimed to investigate the effect of grain size and manufacturing technology on the erosive properties of WC-Co sintered carbides, using tests on sintered materials under different conditions. Erosion studies allowed for the identification of wear mechanisms and the prediction of cutting performance in future applications.

MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

A Finite Element Analysis of the Effects of Graphene and Carbon Nanotubes on Thermal Conductivity of Co Phase in WC-Co Carbide

Zhengwu Li et al.

Summary: By adding CNTs and GNPs to WC-Co carbide, the thermal conductivity of the carbide is significantly improved in this study. Finite element simulations show that the interface thermal conductivity has a significant impact on the composite phase thermal conductivity, and the volume fractions of CNTs and GNPs also affect the thermal conductivity. Proper curvature and ratio of CNTs and GNPs are suggested for better thermal conductivity.

MATERIALS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Failure Behavior of Cemented Tungsten Carbide Materials: A Case Study of Mining Drill Bits

Prvan Kumar Katiyar et al.

Summary: This study focused on examining failed tungsten carbide (WC-Co) drill bits to identify the causes of insert failure, which were primarily due to shear-off, cracking, and wear. Microscopic analysis using FE-SEM and AFM helped in understanding the degradation and tribocorrosion mechanisms of WC-Co inserts, along with the shape change mechanisms of individual WC grains influenced by tribocorrosion. The study discussed wear and corrosion mechanisms of WC-Co inserts, emphasizing the importance of understanding tribocorrosion mechanisms for the selection and development of suitable WC-Co tool materials.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Mechanism of adhesion failure during interrupted cutting with cemented carbide tools: Experimental and ab-initio perspective

Siyuan Gao et al.

Summary: The study revealed that adhesion failure of cemented carbide tools during interrupted cutting is mainly due to the reduced interfacial strength leading to fractures. Insufficient stability of the interface results in large-scale crack expansion in the material, causing it to detach from the workpiece surface.

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

The enhancement of the microstructure and mechanical performances of ultrafine WC-Co cemented carbides by optimizing Cr2(C,N) addition and WC particle sizes

Ding Li et al.

Summary: By adding an appropriate amount of Cr-2(C,N) and reducing the size of WC particles, a good combination of high TRS and hardness can be achieved in cemented carbides.

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Fracture behavior of cemented carbides with CoNiFe medium entropy alloy binder

Cheng Qian et al.

Summary: The study found that WC-CoNiFe has higher fracture toughness than WC-Co, and fracture toughness and fatigue crack growth are closely related to microstructural characteristics. The increase in fracture toughness is attributed to ductile ligament bridging and crack deflection as the mean free path of the binder phase increased or the contiguity of the carbide phase decreased. Furthermore, the dominant effect of maximum stress intensity factor on fatigue crack growth was observed, with a transition from brittle to ductile fracture modes as fracture toughness increased.

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2021)

Add to Collection

Article Materials Science, Ceramics

Combustion synthesis of TiC-based ceramic-metal composites with high entropy alloy binder

A. S. Rogachev et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)

Add to Collection

Article Chemistry, Physical

Development of Ti(C,N)-based cermets with (Co,Fe,Ni)-based high entropy alloys as binder phase

A. G. de la Obra et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Add to Collection

Article Chemistry, Physical

Thermal stability of modified surface microstructure on WC-Co cemented carbide after high current pulsed electron beam irradiation

Wenhai Peng et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of milling conditions and binder phase content on liquid phase sintering of heat treatable WC-Ni-Co-Cr-Al-Ti cemented carbides

Tomas Soria Biurrun et al.

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2020)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Effect of WC grain size on mechanical properties and microstructures of cemented carbide with medium entropy alloy Co-Ni-Fe binder

Cheng Qian et al.

JOURNAL OF CENTRAL SOUTH UNIVERSITY (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Microstructure and properties of WC-Co/CrMnFeCoNi composite cemented carbides

Dingqian Dong et al.

VACUUM (2020)

Add to Collection

Review Materials Science, Multidisciplinary

A comprehensive review on synergy effect between corrosion and wear of cemented tungsten carbide tool bits: A mechanistic approach

Prvan Kumar Katiyar

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

Effects of binders on the microstructures and mechanical properties of ultrafine WC-10%AlxCoCrCuFeNi composites by spark plasma sintering

Wenyan Luo et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Fracture toughness of cemented carbides obtained by electrical resistance sintering

Raquel Astacio et al.

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2019)

Add to Collection

Article Materials Science, Ceramics

Morphology of η phase in cemented carbides with Fe-based binders influenced by carbon content and nitrogen atmosphere

Peng Zhou et al.

CERAMICS INTERNATIONAL (2019)

Add to Collection

Article Materials Science, Multidisciplinary

The manufacture and characterization of WC-(Al)CoCrCuFeNi cemented carbides with nominally high entropy alloy binders

Andrea Mueller-Grunz et al.

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Novel binders for WC-based cemented carbides with high Cr contents

Raquel de Oro Calderon et al.

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Corrosion behavior of WC-Co tool bits in simulated (concrete, soil, and mine) solutions with and without chloride additions

Prvan Kumar Katiyar et al.

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2019)

Add to Collection

Article Materials Science, Ceramics

Effect of Fe/Ni ratio on the microstructure and properties of WC-Fe-Ni-Co cemented carbides

Yang Gao et al.

CERAMICS INTERNATIONAL (2018)

Add to Collection

Article Materials Science, Ceramics

Microstructure and properties of ultrafine grained AlCrFeCoNi/WC cemented carbides

P. L. Zhou et al.

CERAMICS INTERNATIONAL (2018)

Add to Collection

Article Materials Science, Multidisciplinary

High entropy alloy binders in gradient sintered hardmetal

D. Linder et al.

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2018)

Add to Collection

Review Materials Science, Multidisciplinary

The influence of grain growth inhibitors on the microstructure and properties of submicron, ultrafine and nano-structured hardmetals - A review

S. Farag et al.

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

Fabrication and characterization of WC-HEA cemented carbide based on the CoCrFeNiMn high entropy alloy

Irene L. Velo et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Vacancy formation enthalpies of high-entropy FeCoCrNi alloy via first-principles calculations and possible implications to its superior radiation tolerance

Weiliang Chen et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2018)

Add to Collection

Article Materials Science, Multidisciplinary

High entropy alloys: Substituting for cobalt in cutting edge technology

Erik Holmstrom et al.

APPLIED MATERIALS TODAY (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Mechanical properties and microstructure of WC-Fe-Ni-Co cemented carbides prepared by vacuum sintering

Yang Gao et al.

VACUUM (2017)

Add to Collection

Article Materials Science, Ceramics

Effects of WC particle size on sintering behavior and mechanical properties of coarse grained WC-8Co cemented carbides fabricated by unmilled composite powders

Yexi Sun et al.

CERAMICS INTERNATIONAL (2015)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Microstructure and formation process of Ni-pool defect in WC-8Ni cemented carbides

Kai-hua Shi et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Novel cermet material of WC/multi-element alloy

Chi-San Chen et al.

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2014)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Effect of stress ratio on fatigue lifetime and crack growth behavior of WC-Co cemented carbide

Hiroko Mikado et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2014)

Add to Collection

Article Materials Science, Multidisciplinary

Microstructure and mechanical properties of WC-10Co cemented carbide containing VC or (Ta, Nb)C and fracture toughness evaluation using different models

A. M. Soleimanpour et al.

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2012)

Add to Collection

Article Nanoscience & Nanotechnology

Ultrafine WC-Ni cemented carbides fabricated by spark plasma sintering

Huiyong Rong et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)

Add to Collection

Article Materials Science, Multidisciplinary

Control of eta carbide formation in tungsten carbide powders sputter-coated with (Fe/Ni/Cr)

C. M. Fernandes et al.

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2007)

Add to Collection

Article Crystallography

Cr-rich layer at the WC/Co interface in Cr-doped WC-Co cermets:: segregation or metastable carbide?

A Delanoë et al.

JOURNAL OF CRYSTAL GROWTH (2004)

Add to Collection

© Peeref 2019-2024. All rights reserved.