☆ 4.6 Article

Processing and Characterization of β Titanium Alloy Composite Using Power Metallurgy Approach

MATERIALS (2022)

Related references

Note: Only part of the references are listed.

Article Materials Science, Multidisciplinary

Influence of Sintering Temperature on Microstructure and Mechanical Properties of Ti-Mo-B4C Composites

Abbas Sabahi Namini et al.

Summary: The study investigated the effect of sintering temperature on Ti-10 wt% Mo-1 wt% B4C composite samples, showing that higher temperature resulted in near fully dense relative density and improved mechanical properties. XRD and SEM analysis indicated the formation of TiB and TiC in-situ phases, as well as the impact of these phases on grain growth.

METALS AND MATERIALS INTERNATIONAL (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Post hot rolling of spark plasma sintered Ti-Mo-B4C composites

Seyed Ali Delbari et al.

Summary: This study fabricated Ti-10 wt% Mo-1 wt% B4C composites using the SPS technique and investigated the effects of sintering temperature and dwell time on their microstructure and mechanical properties. A high relative density of 99.92% was achieved for the composites sintered at 1450 degrees C and further hot-rolled at 900 degrees C. X-ray analysis illustrated the formation of in-situ phases during the SPS process, while microstructural investigation confirmed the influence of sintering temperature and holding time on reducing porosity. Additionally, the post hot rolling at 900 degrees C was shown to modify the microstructure and activate the strengthening mechanism in the prepared composites.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Enhancement of Oxidation Resistance via Chromium Boron Carbide on Diamond Particles

Xuliang Zhang et al.

Summary: In this study, chromium boron carbide (Cr-B-C) coatings were synthesized on diamond particles to enhance their oxidation resistance. The coatings effectively protected the diamonds in air atmosphere up to 1151 degrees C, forming a protective barrier of Cr2O3 and B2O3. The presence of Cr2O3 provided lasting protection by reducing the evaporation of B2O3, demonstrating a complementary functional protection on diamond particles from oxidation.

COATINGS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Enhancing strength-ductility synergy in an ex situ Zr-based metallic glass composite via nanocrystal formation within high-entropy alloy particles

Huaping Ding et al.

Summary: By adding equiatomic AlCoCrFeNi high-entropy alloy (HEA) particles as the second phase, the strength and plasticity of Zr-based metallic glass composites were improved simultaneously. The enhanced strength-ductility synergy was attributed to high-density dislocations and nanocrystal formation in the HEA particles, as well as stable propagation of multiple shear bands.

MATERIALS & DESIGN (2021)

Add to Collection

Article Materials Science, Ceramics

Characterization of triplet Ti-TiB-TiC composites: Comparison of in-situ formation and ex-situ addition of TiC

Mehdi Fattahi et al.

CERAMICS INTERNATIONAL (2020)

Add to Collection

Article Chemistry, Physical

The microstructures and mechanical properties of graphene-reinforced titanium matrix composites

Hong-chuan Cao et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Microstructure evolution and mechanical properties of selective laser melted bulk-form titanium matrix nanocomposites with minor B4C additions

Hailiang Li et al.

MATERIALS & DESIGN (2020)

Add to Collection

Article Nanoscience & Nanotechnology

In situ reactions during direct laser deposition of Ti-B4C composites

Mohan Sai Kiran Kumar Yadav Nartu et al.

SCRIPTA MATERIALIA (2020)

Add to Collection

Review Chemistry, Physical

High oxygen-content titanium and titanium alloys made from powder

S. D. Luo et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of B4C content on sintering behavior, microstructure and mechanical properties of Ti-based composites fabricated via spark plasma sintering

Abbas Sabahi Namini et al.

MATERIALS CHEMISTRY AND PHYSICS (2020)

Add to Collection

Article Engineering, Manufacturing

Microstructure and mechanical properties of (TiB plus TiC)/Ti composites fabricated in situ via selective laser melting of Ti and B4C powders

Changjun Han et al.

ADDITIVE MANUFACTURING (2020)

Add to Collection

Article Metallurgy & Metallurgical Engineering

THE DESIGN OF Ti-5Al-5Mo-5V-3Cr ELEMENTAL POWDERS MIXTURE PROCESSING

K. Zygula et al.

ARCHIVES OF METALLURGY AND MATERIALS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Network-Strengthened Ti-6Al-4V/(TiC+TiB) Composites: Powder Metallurgy Processing and Enhanced Tensile Properties at Elevated Temperatures

Shaolou Wei et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2019)

Add to Collection

Review Materials Science, Multidisciplinary

A Review on High-Strength Titanium Alloys: Microstructure, Strengthening, and Properties

LiMei Kang et al.

ADVANCED ENGINEERING MATERIALS (2019)

Add to Collection

Review Engineering, Manufacturing

Titanium metal matrix composites: An overview

Muhammad D. Hayat et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)

Add to Collection

Review Chemistry, Physical

Progress on discontinuously reinforced titanium matrix composites

Yang Jiao et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Characterization of In-Situ TiB/TiC Particle-Reinforced Ti-5Al-5Mo-5V-3Cr Matrix Composites Synthesized by Solid-State Reaction with B4C and Graphite through SPS

Steffen Gruetzner et al.

METALS (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Microstructure and Mechanical Properties of In Situ TiB/TiC Particle-Reinforced Ti-5Al-5Mo-5V-3Cr Composites Synthesized by Spark Plasma Sintering

Steffen Gruetzner et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2018)

Add to Collection

Article Materials Science, Ceramics

Boron carbide/graphene platelet ceramics with improved fracture toughness and electrical conductivity

Richard Sedlak et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2017)

Add to Collection

Article Nanoscience & Nanotechnology

High cycle fatigue and fracture behavior of Ti-5Al-5Mo-5V-3Cr alloy with BASCA and double aging treatments

Leonardo Contri Campanelli et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)

Add to Collection

Article Chemistry, Physical

Precipitation processes in the Beta-Titanium alloy Ti-5Al-5Mo-5V-3Cr

James Coakley et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Behavior of Boron in Molten Aluminum and its Grain Refinement Mechanism

Houshang D. Alamdari et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2013)

Add to Collection

Article Chemistry, Physical

Fabrication and mechanical properties of in situ TiC/Ti metal matrix composites

Liu Yanbin et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2011)

Add to Collection

Article Materials Science, Ceramics

Microstructural characterization of spark plasma sintered boron carbide ceramics

S. Hayun et al.

CERAMICS INTERNATIONAL (2010)

Add to Collection

Article Chemistry, Physical

Tracer diffusion of boron in α-Ti and γ-TiAl

S. V. Divinski et al.

INTERMETALLICS (2008)

Add to Collection

Article Physics, Applied

Self-diffusion of boron in TiB2

H Schmidt et al.

JOURNAL OF APPLIED PHYSICS (2003)

Add to Collection

Article Nanoscience & Nanotechnology

In-situ Ti-TiB metal-matrix composite prepared by a reactive pressing process

ZY Ma et al.

SCRIPTA MATERIALIA (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.