4.6 Article

A modelling method for large-scale open spaces orientated toward coordinated control of multiple air-terminal units

Related references

Note: Only part of the references are listed.
Article Construction & Building Technology

Investigation of inter-zonal heat transfer in large space buildings based on similarity: Comparison of two stratified air-conditioning systems

Hao Hu et al.

Summary: This research investigated airflow patterns and heat transfer between unoccupied and occupied zones under floor-level sidewall air-supply system (FSAS) and nozzle sidewall air-supply system (NSAS) using experimental and CFD methods. The study found that the two scaled models had similar indoor thermal performance, with different heat transfer mechanisms under the two systems.

ENERGY AND BUILDINGS (2022)

Article Thermodynamics

Numerical analysis of horizontal temperature distribution in large buildings by thermo-aeraulic zonal approach

Nisrine Laghmich et al.

Summary: A thermo-aeraulic zonal model was developed in this study to analyze spatial temperature distribution in large buildings. Results showed that factors such as building height, internal loads, natural ventilation, and climatic conditions have significant impacts on temperature distribution and energy consumption. Efficient spatial temperature distribution can reduce annual building energy needs by approximately 32%.

BUILDING SIMULATION (2022)

Article Construction & Building Technology

Study on the impacts of occupant distribution on the thermal environment of tall and large public spaces

Bo Lan et al.

Summary: The study demonstrated the impact of occupant distribution on the thermal environment in large public spaces. By considering thermal coupling between different subzones, a supply air reallocation optimization based on occupant distribution was proposed, effectively improving thermal uniformity in the building.

BUILDING AND ENVIRONMENT (2022)

Review Construction & Building Technology

A new dynamic zOnal model with air-diffuser (DOMA)-Application to thermal comfort prediction

Ahmed Megri et al.

Summary: A new dynamic zonal model with air-diffuser (DOMA) was developed and coupled with TRNSYS to predict indoor temperature distribution. The study found that increasing the heating outputs of the electric floor system does not effectively improve thermal comfort. Therefore, careful consideration is needed when selecting the location and set point for the thermostat.

INDOOR AND BUILT ENVIRONMENT (2022)

Article Construction & Building Technology

Metabolism-based ventilation monitoring and control method for COVID-19 risk mitigation in gymnasiums and alike places

Junqi Wang et al.

Summary: This article introduces a metabolism-based ventilation control method that uses computer vision algorithm to monitor human activities and artificial neural network for metabolic prediction, aiming to reduce infection risk and save energy.

SUSTAINABLE CITIES AND SOCIETY (2022)

Article Construction & Building Technology

Data Reconstruction of Wireless Sensor Network and Zonal Demand Control in a Large-Scale Indoor Space Considering Thermal Coupling

Pei Zhou et al.

Summary: This study utilized a wireless sensor network to monitor indoor environmental parameters and compared the accuracy of different algorithms for data reconstruction. The effectiveness of zonal demand control method was validated through simulation experiments, which can improve thermal comfort and energy efficiency.

BUILDINGS (2022)

Article Thermodynamics

Research on optimization and design methods for air distribution system based on target values

Ran Gao et al.

Summary: This paper discusses a new method for optimizing air distribution design in large buildings based on target value evaluation, analyzing the effects of tuyere size, airflow temperature, air-supply angle, and velocity through orthogonal tests and decoupling. For lateral air supply distribution in winter, the optimal deflection angle, velocity, and temperature can be determined sequentially.

BUILDING SIMULATION (2021)

Article Energy & Fuels

Guardrail-based air supply terminal for improving ventilation effectiveness and saving energy in the waiting zone

Ran Gao et al.

Summary: This paper proposes a guardrail-based air supply terminal to optimize indoor air circulation and temperature balance, meeting users' comfort needs. The research results show that the device can effectively save energy in high-density crowd areas.

ENERGY EXPLORATION & EXPLOITATION (2021)

Article Construction & Building Technology

Fast simulation and high-fidelity reduced-order model of the multi-zone radiant floor system for efficient application to model predictive control

Qiong Chen et al.

Summary: A novel fast high-fidelity reduced-order model is proposed in this research, which effectively reduces the complexity of model predictive control, improves computational efficiency, and enhances robustness. The reduced-order model significantly reduces computation time and achieves a balance between accuracy and computational cost.

ENERGY AND BUILDINGS (2021)

Article Construction & Building Technology

Occupant-density-detection based energy efficient ventilation system: Prevention of infection transmission

Junqi Wang et al.

Summary: This study proposes a smart low-cost ventilation control strategy based on occupant density detection algorithm, which automatically adjusts ventilation rate to save energy and reduce infection transmission probability. Case studies show that the strategy can achieve 11.7% energy savings while lowering the infection probability to 2%.

ENERGY AND BUILDINGS (2021)

Article Construction & Building Technology

High-efficiency diffuser based on a normalized evaluation index of jet length and resistance

Ran Gao et al.

Summary: This study introduces a high-efficiency diffuser that reduces fan energy consumption by decreasing resistance, and describes the jet length and resistance of the diffuser through the ADEI index. Preliminary results show that the novel diffuser outperforms the traditional round diffuser.

BUILDING AND ENVIRONMENT (2021)

Article Construction & Building Technology

Online model for indoor temperature control based on building thermal process of air conditioning system

Xiuming Li et al.

Summary: This study proposes an online modeling method for indoor temperature regulation based on building thermal process characteristics. By using a data-driven model and identifying parameters through multiple linear regression analysis, a model that retains system physical properties and can be updated online has been achieved. This model with building thermal process properties will be beneficial for the design of terminal controllers for indoor temperature regulation in air conditioning systems.

JOURNAL OF BUILDING ENGINEERING (2021)

Article Construction & Building Technology

Coupling CFD and building energy modelling to optimize the operation of a large open office space for occupant comfort

Xiaofang Shan et al.

SUSTAINABLE CITIES AND SOCIETY (2020)

Review Green & Sustainable Science & Technology

Zonal modelling for thermal and energy performance of large space buildings: A review

Yanyu Lu et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2020)

Article Construction & Building Technology

Fully mixed air model based cooling load estimation method for both stratum ventilation and displacement ventilation

Sheng Zhang et al.

ENERGY AND BUILDINGS (2019)

Editorial Material Construction & Building Technology

Challenges of using CFD simulation for the design and online control of ventilation systems

Shi-Jie Cao

INDOOR AND BUILT ENVIRONMENT (2019)

Article Construction & Building Technology

Heat removal efficiency based multi-node model for both stratum ventilation and displacement ventilation

Sheng Zhang et al.

BUILDING AND ENVIRONMENT (2018)

Article Construction & Building Technology

Ventilation control strategy using low-dimensional linear ventilation models and artificial neural network

Shi-Jie Cao et al.

BUILDING AND ENVIRONMENT (2018)

Proceedings Paper Green & Sustainable Science & Technology

A coordinated VAV control with integration of heat transfer coefficients for improving energy efficiency and thermal comfort

Pei Zhou et al.

LEVERAGING ENERGY TECHNOLOGIES AND POLICY OPTIONS FOR LOW CARBON CITIES (2017)

Article Energy & Fuels

Virtual partition surface temperature sensor based on linear parametric model

Denchai Woradechjumroen et al.

APPLIED ENERGY (2016)

Article Construction & Building Technology

A virtual thermostat for local temperature control

Mohamed Alhashme et al.

ENERGY AND BUILDINGS (2016)

Article Construction & Building Technology

New calibrated zonal model (POMA+) for temperature and airflow predictions

Ahmed Cherif Megri et al.

BUILDING AND ENVIRONMENT (2015)

Article Construction & Building Technology

A neural network-based multi-zone modelling approach for predictive control system design in commercial buildings

Hao Huang et al.

ENERGY AND BUILDINGS (2015)

Article Construction & Building Technology

A state-space model for dynamic response of indoor air temperature and humidity

Ye Yao et al.

BUILDING AND ENVIRONMENT (2013)

Article Construction & Building Technology

Calibration of HVAC equipment PID coefficients for energy conservation

A. P. Wemhoff

ENERGY AND BUILDINGS (2012)

Article Construction & Building Technology

Ceiling radiant cooling: Comparison of ARMAX and subspace identification modelling methods

Lukas Ferkl et al.

BUILDING AND ENVIRONMENT (2010)

Article Construction & Building Technology

Building temperature regulation using a distributed model predictive control

Petru-Daniel Morosan et al.

ENERGY AND BUILDINGS (2010)

Article Thermodynamics

A heat transfer parameter at air interfaces in the BLOCK model for building thermal environment

Jun Gao et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2010)

Article Construction & Building Technology

Calculation of natural ventilation in large enclosures

Jun Gao et al.

INDOOR AND BUILT ENVIRONMENT (2007)

Article Construction & Building Technology

Measurements of indoor thermal environment and energy analysis in a large space building in typical seasons

Chen Huang et al.

BUILDING AND ENVIRONMENT (2007)

Article Construction & Building Technology

COwZ - A subzonal indoor airflow, temperature and contaminant dispersion model

John Stewart et al.

BUILDING AND ENVIRONMENT (2006)

Article Energy & Fuels

A zonal model for large enclosures with combined stratification cooling and natural ventilation: Part 1 - Model generation and its procedure

Jun Gao et al.

JOURNAL OF SOLAR ENERGY ENGINEERING-TRANSACTIONS OF THE ASME (2006)

Article Thermodynamics

Dynamic model of an HVAC system for control analysis

B Tashtoush et al.

ENERGY (2005)

Article Thermodynamics

Simplified numerical models for complex air supply diffusers

J Srebric et al.

HVAC&R RESEARCH (2002)