☆ 4.7 Article

Multiaxial thermo-mechanical fatigue damage mechanism of TC4 titanium alloy

THEORETICAL AND APPLIED FRACTURE MECHANICS (2022)

Related references

Note: Only part of the references are listed.

Article Engineering, Mechanical

A novel fatigue-oxidation-creep life prediction method under non-proportional loading

Dao-Hang Li et al.

Summary: A new life assessment framework is proposed based on elastic-viscoplastic modeling and damage behavior for structural components under multiaxial nonproportional loading at high temperature. The framework utilizes a viscoplastic constitutive model to capture non-proportional hardening effect and a damage model to assess failure life comprehensively. Evaluation of the framework at 650 degrees C shows errors within a factor of 2 under proportional and non-proportional fatigue loadings.

ENGINEERING FAILURE ANALYSIS (2022)

Add to Collection

Article Engineering, Mechanical

The effect of dwell on thermomechanical fatigue in superaustenitic steel Sanicro 25

Roman Petras et al.

Summary: The superaustenitic steel Sanicro 25 was subjected to out-of-phase thermomechanical fatigue cycles with dwell at peak temperature within the range of 250°C to 700°C. The effects of dwell on cyclic response, internal structure, and damage mechanism were studied, evaluating cyclic hardening/softening curves, stress-strain curves, and fatigue life curves. Various advanced microscopy techniques were used to analyze internal structure, nanoparticle obstacles for dislocation motion, and mechanisms responsible for fatigue crack nucleation and propagation. Discussions were made on the effects of dwells in in-phase and out-of-phase cycling on fatigue behavior, internal structure modification, and damage mechanisms.

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2021)

Add to Collection

Article Engineering, Mechanical

Physically-based modeling of cyclic softening and damage behaviors for a martensitic turbine rotor material at elevated temperature

Dao-Hang Li et al.

Summary: The proposed unified viscoplastic constitutive model combined with a physically-based damage variable can effectively model the cyclic elastic-viscoplastic behavior of the material at high temperature, by considering factors such as dislocation density and martensitic lath width.

INTERNATIONAL JOURNAL OF FATIGUE (2021)

Add to Collection

Article Engineering, Mechanical

Multiaxial low-cycle thermo-mechanical fatigue of a low-alloy martensitic steel: Cyclic mechanical behaviour, damage mechanisms and life prediction

Michal Bartosak et al.

Summary: The study found that non-proportional loading increases fatigue damage and decreases observed lifetime in low-cycle fatigue tests. A TMF damage model was proposed to account for the effects of multiaxial loading and temperature variations. The model, based on a critical plane approach, incorporates fatigue, oxidation, and creep forms of damage and is validated against a large experimental database.

INTERNATIONAL JOURNAL OF FATIGUE (2021)

Add to Collection

Article Nanoscience & Nanotechnology

The effect of dwell times on the thermomechanical fatigue life performance of grade P92 steel at intermediate and low strain amplitudes

Maria Juergens et al.

Summary: An extended TMF test program on grade P92 steel in the temperature range of 620 degrees C-300 degrees C was conducted, revealing continuous cyclic softening at all strain amplitudes. Fractographic analyses indicated creep-dominated damage for in-phase (IP) tests and fatigue-dominated damage for out-of-phase (OP) tests. The study found that subcritical growth of cracks governs failure in the investigated range of strain amplitudes.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

Add to Collection

Article Engineering, Mechanical

Life assessment of a low-alloy martensitic steel under isothermal low-cycle fatigue-creep and thermo-mechanical fatigue-creep loading conditions

Michal Bartosak et al.

Summary: The phase angle in TMF tests has a significant influence on the dominant damage mechanism and observed lifetime. A modified damage model has been proposed to account for the effect of the phase angle.

INTERNATIONAL JOURNAL OF FATIGUE (2021)

Add to Collection

Article Engineering, Mechanical

A comparative study between in- and out-of-phase thermomechanical fatigue behaviour of a single-crystal superalloy

Mikael Segersall et al.

Summary: The study reveals that there is no significant difference in fatigue lives between in-phase and out-of-phase thermomechanical fatigue of a single-crystal superalloy, with localized deformation bands being the main deformation mechanism and crack initiation preferred in these bands. Other TMF mechanisms, such as recrystallization and oxidation, are also discussed.

INTERNATIONAL JOURNAL OF FATIGUE (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Fatigue-oxidation-creep damage model under axial-torsional thermo-mechanical loading

Dao-Hang Li et al.

INTERNATIONAL JOURNAL OF DAMAGE MECHANICS (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Isothermal and thermomechanical fatigue behaviour of type 316LN austenitic stainless steel base metal and weld joint

T. Suresh Kumar et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Cyclic deformation and cracking behavior of 316LN stainless steel under thermomechanical and isothermal fatigue loadings

Bingbing Li et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

Add to Collection

Article Engineering, Mechanical

Simulations of isothermal and thermomechanical fatigue of a polycrystal made out of austenitic stainless steels and relation to the Coffin-Manson law

Bernard Tirbonod

THEORETICAL AND APPLIED FRACTURE MECHANICS (2020)

Add to Collection

Article Engineering, Mechanical

The effect of phase angle on crack growth mechanisms under thermo-mechanical fatigue loading

J. Jones et al.

INTERNATIONAL JOURNAL OF FATIGUE (2020)

Add to Collection

Article Engineering, Mechanical

Cyclic plastic response and damage mechanisms in superaustenitic steel Sanicro 25 in high temperature cycling - Effect of tensile dwells and thermomechanical cycling

Jaroslav Polak et al.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Effects of thermal cycling and microstructure on the fatigue crack propagation in forged titanium-aluminide alloys under thermomechanical fatigue conditions

Yasuhiro Yamazaki et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Influence of dwell times on microstructure, deformation and damage behavior of NiCr22Co12Mo9 under thermomechanical fatigue

Stefan Guth et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

Add to Collection

Article Engineering, Mechanical

Influence of laser peening on the high-temperature fatigue life and fracture of Inconel 718 nickel-based alloy

Jie Sheng et al.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Stress-based fatigue behavior of Ti-6Al-4V alloy with a discontinuous lamellar microstructure fabricated by thermomechanical powder consolidation

Lei Meng et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

Add to Collection

Article Engineering, Mechanical

Life assessment of multiaxial thermomechanical fatigue of a nickel-based superalloy Inconel 718

Jingyu Sun et al.

INTERNATIONAL JOURNAL OF FATIGUE (2019)

Add to Collection

Article Materials Science, Multidisciplinary

A physically-based model of cyclic responses for martensitic steels with the hierarchical lath structure under different loading modes

Peng Zhao et al.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Microcrack initiation mechanisms of 316LN austenitic stainless steel under in-phase thermomechanical fatigue loading

Bingbing Li et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

Add to Collection

Article Engineering, Mechanical

Thermomechanical fatigue in 9-12Cr steels: Life prediction models and the effect of tensile dwell periods

Richard A. Barrett et al.

INTERNATIONAL JOURNAL OF FATIGUE (2019)

Add to Collection

Article Engineering, Mechanical

Unified viscoplastic constitutive model under axial-torsional thermo-mechanical cyclic loading

Dao-Hang Li et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Isothermal and thermomechanical fatigue behavior of Inconel 718 superalloy

Wenkai Deng et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

Add to Collection

Article Engineering, Mechanical

Thermal-mechanical fatigue behavior and lifetime prediction of P92 steel with different phase angles

Xiang-Ming Pan et al.

INTERNATIONAL JOURNAL OF FATIGUE (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Thermo-mechanical fatigue damage behavior for Ni-based superalloy under axial-torsional loading

Dao-Hang Li et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Low cycle fatigue behavior and microstructure evolution of a novel 9Cr-3W-3Co tempered martensitic steel at 650 degrees C

Hongyang Jing et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

Add to Collection

Article Engineering, Mechanical

A synthesis of cracking directions in tension-torsion multiaxial low cycle fatigue at high and room temperatures

Masao Sakane et al.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2018)

Add to Collection

Article Engineering, Mechanical

Damage mechanisms in silicon-molybdenum cast irons subjected to thermo-mechanical fatigue

V. Norman et al.

INTERNATIONAL JOURNAL OF FATIGUE (2017)

Add to Collection

Article Engineering, Mechanical

The influence of phase angle, strain range and peak cycle temperature on the TMF crack initiation behaviour and damage mechanisms of the nickel-based superalloy, RR1000

Jonathan Jones et al.

INTERNATIONAL JOURNAL OF FATIGUE (2017)

Add to Collection

Article Mechanics

Thermo-mechanical low-cycle fatigue-creep of Haynes 230

Raasheduddin Ahmed et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2017)

Add to Collection

Article Engineering, Mechanical

A Mechanism-Based Approach From Low Cycle Fatigue to Thermomechanical Fatigue Life Prediction

Xijia Wu et al.

JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME (2016)

Add to Collection

Article Nanoscience & Nanotechnology

Thermomechanical fatigue and damage mechanisms in Sanicro 25 steel

R. Petras et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)

Add to Collection

Article Nanoscience & Nanotechnology

Characterization of fatigue properties of powder metallurgy titanium alloy

Yuankui Cao et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)

Add to Collection

Article Materials Science, Multidisciplinary

A Critical Assessment of Cyclic Softening and Hardening Behavior in a Near-α Titanium Alloy During Thermomechanical Fatigue

Kartik Prasad et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Thermomechanical Fatigue of Ductile Cast Iron and Its Life Prediction

Xijia Wu et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2015)

Add to Collection

Article Engineering, Mechanical

High-temperature fatigue behaviour of a second generation near-γ titanium aluminide sheet material under isothermal and thermomechanical conditions

P. Schallow et al.

INTERNATIONAL JOURNAL OF FATIGUE (2013)

Add to Collection

Article Nanoscience & Nanotechnology

Isothermal and thermomechanical fatigue behaviour of Ti-6Al-4V titanium alloy

Kartik Prasad et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)

Add to Collection

Article Mechanics

Prediction of crack growth in a nickel-based superalloy under fatigue-oxidation conditions

L. G. Zhao et al.

ENGINEERING FRACTURE MECHANICS (2010)

Add to Collection

Article Engineering, Mechanical

Multiaxial cyclic deformation and non-proportional hardening employing discriminating load paths

Nima Shamsaei et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2010)

Add to Collection

Article Nanoscience & Nanotechnology

A comparative study of isothermal and thermomechanical fatigue on type 316L(N) austenitic stainless steel

A. Nagesha et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)

Add to Collection

Article Nanoscience & Nanotechnology

Axial-torsional thermomechanical fatigue of a near-γ TiAl-alloy

S. P. Brookes et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)

Add to Collection

Article Engineering, Mechanical

Thermo-mechanical fatigue of a polycrystalline superalloy: The effect of phase angle on TMF life and failure

S. Pahlavanyali et al.

INTERNATIONAL JOURNAL OF FATIGUE (2008)

Add to Collection

Article Engineering, Mechanical

Influence of non-proportional loading on ratcheting responses and simulations by two recent cyclic plasticity models

Tasnim Hassan et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2008)

Add to Collection

Article Materials Science, Multidisciplinary

Modeling thermomechanical fatigue life of high-temperature titanium alloy IMI 834

HJ Maier et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.