☆ 4.5 Article

Synthesis methods of NiOx nanoparticles and its effect on hole conductivity and stability of n-i-p perovskite solar cells

SYNTHETIC METALS (2022)

Related references

Note: Only part of the references are listed.

Article Materials Science, Multidisciplinary

Improved morphology, structure and optical properties of CH3NH3PbI3 film via HQ additive in PbI2 precursor solution for efficient and stable mesoporous perovskite solar cells

Hojjat Amrollahi Bioki et al.

Summary: Research focuses on improving crystal growth and defect passivation of perovskite films using additive engineering to enhance the performance and stability of photovoltaic devices. Results demonstrate that the incorporation of hydroxyquinoline (HQ) additive can effectively control nucleation, crystal growth, and optical properties of perovskite films, leading to improved efficiency and stability of perovskite solar cells. This study achieved stable and efficient mesoporous PSCs with HQ additive, showing a champion efficiency of 16.33% and retaining 80% of initial values after 30 days of storage.

SYNTHETIC METALS (2022)

Add to Collection

Review Chemistry, Physical

Design of dopant-free small molecular hole transport materials for perovskite solar cells: a viewpoint from defect passivation

Wanhai Wang et al.

Summary: This review discusses recent advances in undoped hole transport materials (HTMs) for perovskite solar cells, proposes design strategies for improving the performance of PVSCs, and examines the correlation between molecular structures and device performance and stability. The development of dopant-free small organic HTMs is considered a promising approach for achieving efficient and stable PVSCs towards commercialization.

JOURNAL OF MATERIALS CHEMISTRY A (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Interfacial engineering of mp-TiO2/CH3NH3PbI3 with Al2O3: Effect of different phases of alumina on performance and stability of perovskite solar cells

Naser Jahanbakhshi Zadeh et al.

Summary: The study found that the photo anode electrode prepared by gamma-Al2O3 exhibited the best photovoltaic performance, while using amorphous Al2O3 as the substrate for perovskite solar cells resulted in lower stability. Perovskite solar cells constructed with surface passivated TiO2 films showed poorer performance and stability compared to unpassivated devices.

JOURNAL OF MATERIALS RESEARCH (2021)

Add to Collection

Article Multidisciplinary Sciences

Perovskite solar cells with atomically coherent interlayers on SnO2 electrodes

Hanul Min et al.

Summary: By introducing an interlayer between the electron-transporting and perovskite layers in perovskite solar cells, researchers have successfully enhanced charge extraction and transport from the perovskite, leading to higher power conversion efficiency and fewer interfacial defects. The coherent interlayer allowed the fabrication of devices with a certified efficiency of 25.5%, which maintained about 90% of its initial efficiency even after continuous light exposure for 500 hours. The findings provide guidelines for designing defect-minimizing interfaces in metal halide perovskites and electron-transporting layers.

NATURE (2021)

Add to Collection

Article Energy & Fuels

Inverted perovskite solar cells based on inorganic hole transport material of CuInS2 with high efficiency and stability

Sike Yang et al.

Summary: CuInS2 nanocrystals were successfully synthesized and used as a hole transport material in inverted perovskite solar cells, showing similar performance to NiO-based devices and enhanced stability over time. The results suggest that CuInS2 nanocrystals are promising materials for assembling efficient inverted PSCs.

SOLAR ENERGY (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Organic Ammonium Halide Modulators as Effective Strategy for Enhanced Perovskite Photovoltaic Performance

Seckin Akin et al.

Summary: This review summarizes the recent advances in improving the photovoltaic performance of PSCs by using ammonium halide-based molecular modulators, focusing on the challenges associated with hygroscopicity and ion migration, the roles of ammonium-based passivation agents on overlayers, and future prospects for application.

ADVANCED SCIENCE (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Dopant Engineering for Spiro-OMeTAD Hole-Transporting Materials towards Efficient Perovskite Solar Cells

Ji-Youn Seo et al.

Summary: This study analyzed the effect of different metal cations on doping spiro-OMeTAD in hybrid perovskite solar cells, revealing the superior performance of Zn(TFSI)(2) salts compared to others. This provides new design principles for dopant engineering in HTMs for hybrid perovskite photovoltaics.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Overcoming the carrier transport limitation in Ruddlesden-Popper perovskite films by using lamellar nickel oxide substrates

Jianghu Liang et al.

Summary: Quasi-2D Ruddlesden-Popper perovskite films composed of multiple 2D phases exhibit limited carrier transportation due to low-n-value phases (n = 1 and n = 2). Using a lamellar nickel oxide substrate as a hole transporting layer can improve fill factor and open-circuit voltage, leading to a significantly enhanced power conversion efficiency for PEA and FPEA based 2D perovskite solar cells.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Add to Collection

Review Chemistry, Physical

Effects of A site doping on the crystallization of perovskite films

Caiyi Zhang et al.

Summary: A-site doping in perovskite materials influences the crystallization of perovskite films in various ways such as morphology and crystallinity, nucleation and growth, phase transition, and crystal orientation. Further studies on the impact of A-site doping on the performance and stability of perovskite solar cells are recommended using advanced characterization methods, theoretical computation, and machine learning.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Fabrication of stable and efficient 2D/3D perovskite solar cells through post-treatment with TBABF4

M. Dehghanipour et al.

Summary: By using TBABF4 as a passivator, this study enhanced the performance and stability of perovskite solar cells through post-treatment. The generation of TBA(+) cations from TBABF4 led to the formation of a 2D/3D heterostructure layer, improving the stability of PSCs.

JOURNAL OF MATERIALS CHEMISTRY C (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Interface Engineering by Thiazolium Iodide Passivation Towards Reduced Thermal Diffusion and Performance Improvement in Perovskite Solar Cells

Manuel Salado et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Detrimental Effect of Unreacted PbI2 on the Long-Term Stability of Perovskite Solar Cells

Ganbaatar Tumen-Ulzii et al.

ADVANCED MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

NiOx/Spiro Hole Transport Bilayers for Stable Perovskite Solar Cells with Efficiency Exceeding 21%

Renjie Li et al.

ACS ENERGY LETTERS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Blending with a phthalocyanine leads to improved P3HT donor layers for OPVs

Diego Fernando Silva Sousa et al.

SYNTHETIC METALS (2020)

Add to Collection

Article Chemistry, Physical

Spiro-OMeTAD or CuSCN as a preferable hole transport material for carbon-based planar perovskite solar cells

Yang Yang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Add to Collection

Article Chemistry, Physical

CuSCN as Hole Transport Material with 3D/2D Perovskite Solar Cells

Vinod E. Madhavan et al.

ACS APPLIED ENERGY MATERIALS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Optical properties of the perovskite films deposited on meso-porous TiO2 by one step and hot casting techniques

Naser Jahanbakhshi Zadeh et al.

THIN SOLID FILMS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Evidence of Spiro-OMeTAD De-doping by tert-Butylpyridine Additive in Hole-Transporting Layers for Perovskite Solar Cells

Francesco Lamberti et al.

CHEM (2019)

Add to Collection

Article Chemistry, Physical

Air-Stable n-i-p Planar Perovskite Solar Cells Using Nickel Oxide Nanocrystals as Sole Hole-Transporting Material

Juan Tirado et al.

ACS APPLIED ENERGY MATERIALS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Long-Term Stability of the Oxidized Hole-Transporting Materials used in Perovskite Solar Cells

Ernestas Kasparavicius et al.

CHEMISTRY-A EUROPEAN JOURNAL (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Improving the stability and performance of perovskite solar cells via off-the-shelf post-device ligand treatment

Hong Zhang et al.

ENERGY & ENVIRONMENTAL SCIENCE (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of crystallization strategies on CH3NH3PbI3 perovskite layer deposited by spin coating method: Dependence of photovoltaic performance on morphology evolution

Naser Jahanbakhshi Zadeh et al.

THIN SOLID FILMS (2018)

Add to Collection

Article Chemistry, Physical

Strategic Synthesis of Ultrasmall NiCo2O4 NPs as Hole Transport Layer for Highly Efficient Perovskite Solar Cells

Dan Ouyang et al.

ADVANCED ENERGY MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

One plus one greater than two: high-performance inverted planar perovskite solar cells based on a composite CuI/CuSCN hole-transporting layer

Haoxin Wang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2018)

Add to Collection

Article Chemistry, Physical

Highly efficient planar perovskite solar cells achieved by simultaneous defect engineering and formation kinetic control

Jiaqi Cheng et al.

JOURNAL OF MATERIALS CHEMISTRY A (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Extrinsic ion migration in perovskite solar cells

Zhen Li et al.

ENERGY & ENVIRONMENTAL SCIENCE (2017)

Add to Collection

Article Chemistry, Physical

Nickel oxide nanoparticles for efficient hole transport in p-i-n and n-i-p perovskite solar cells

Zonghao Liu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

Add to Collection

Article Multidisciplinary Sciences

Relationship between ion migration and interfacial degradation of CH3NH3PbI3 perovskite solar cells under thermal conditions

Seongtak Kim et al.

SCIENTIFIC REPORTS (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Accelerated Degradation Due to Weakened Adhesion from Li-TFSI Additives in Perovskite Solar Cells

Inhwa Lee et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Add to Collection

Article Chemistry, Physical

Photo-induced degradation of lead halide perovskite solar cells caused by the hole transport layer/metal electrode interface

Dong Wei et al.

JOURNAL OF MATERIALS CHEMISTRY A (2016)

Add to Collection

Article Nanoscience & Nanotechnology

New Physical Deposition Approach for Low Cost Inorganic Hole Transport Layer in Normal Architecture of Durable Perovskite Solar Cells

Bahram Abdollahi Nejand et al.

ACS APPLIED MATERIALS & INTERFACES (2015)

Add to Collection

Article Chemistry, Physical

Improving the Long-Term Stability of Perovskite Solar Cells with a Porous Al2O3 Buffer Layer

Simone Guarnera et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2015)

Add to Collection

Article Chemistry, Physical

Efficient fully-vacuum-processed perovskite solar cells using copper phthalocyanine as hole selective layers

Weijun Ke et al.

JOURNAL OF MATERIALS CHEMISTRY A (2015)

Add to Collection

Article Chemistry, Physical

Montmorillonite as bifunctional buffer layer material for hybrid perovskite solar cells with protection from corrosion and retarding recombination

Wenzhe Li et al.

JOURNAL OF MATERIALS CHEMISTRY A (2014)

Add to Collection

© Peeref 2019-2024. All rights reserved.