☆ 4.5 Review

Computationally Efficient Cellular Automata-Based Full-Field Models of Static Recrystallization: A Perspective Review

STEEL RESEARCH INTERNATIONAL (2023)

Related references

Note: Only part of the references are listed.

Article Materials Science, Multidisciplinary

Non-uniform Grain Boundary Migration During Static Recrystallization: A Cellular Automaton Study

Fengxiang Lin et al.

Summary: The cellular automaton model successfully predicted the shape of recrystallized grains and revealed the influences of gradients of stored energy, grain boundary curvature, and heterogeneity of grain boundary mobility on non-uniform migration of grain boundary segments. The model also compared the contributions of different factors to grain characteristics, showing a decreasing average grain growth rate as a trend.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2022)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Towards efficient GPGPU Cellular Automata model implementation using persistent active cells

Pawel Renc et al.

Summary: This paper applies the Nvidia CUDA architecture to simulate a groundwater hydrological model based on the Cellular Automata formalism. It presents and evaluates different implementations and optimizations to speed up simulation times, providing valid support for complex system modeling.

JOURNAL OF COMPUTATIONAL SCIENCE (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Development of a complex multicomponent microstructure on commercial carbon-silicon grade steel by governing the phase transformation mechanisms to design novel quenching and partitioning processing

Felipe M. Carvalho et al.

Summary: Novel quenching and partitioning (Q&P) processing were designed to deliver a complex and desirable nanostructured multicomponent microstructure in commercial carbon silicon spring steel, enhancing its mechanical properties with high ultimate tensile strength, yield strength, and good strain to fracture.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

Add to Collection

Review Materials Science, Multidisciplinary

Review on modeling and simulation of dynamic recrystallization of martensitic stainless steels during bulk hot deformation

Hamed Aghajani Derazkola et al.

Summary: This review paper presents the latest developments in the numerical analysis, microstructural simulation, and artificial intelligence methods for the hot deformation process of martensitic stainless steels (MSS). Modeling and simulation analysis can reduce the number of experiments and provide insights into the effects of strain and strain rate variations in manufacturing processes.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Research advances of magnesium and magnesium alloys worldwide in 2021

Jiangfeng Song et al.

Summary: In 2021, over 4000 papers on Mg and Mg alloys were published and indexed in the Web of Science (WoS) Core Collection database. The main research focus was on the microstructure, mechanical properties, and corrosion of Mg alloys. Mg ion batteries and hydrogen storage Mg materials attracted significant attention. Chinese universities and research institutions, along with institutions from Germany, the United States, Australia, Japan, Korea, and Iran, made important contributions to the research and development of magnesium alloys.

JOURNAL OF MAGNESIUM AND ALLOYS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Kinetic Monte Carlo Simulation of Abnormal Grain Growth in Textured Systems with Anisotropic Grain Boundary Energy and Mobility

Haijie Xu et al.

Summary: The abnormal grain growth behavior of an individual grain in the textured system was simulated, and it was found that the anisotropy of grain boundary mobility and energy has a significant impact on the growth process.

MATERIALS TODAY COMMUNICATIONS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

On the use of transfer modeling to design new steels with excellent rotating bending fatigue resistance even in the case of very small calibration datasets

Xiaolu Wei et al.

Summary: This research proposes a machine learning model for predicting rotating bending fatigue strength and high-throughput design of fatigue resistant steels. The transfer prediction framework shows high accuracy for fatigue strength prediction and has a high tolerance for limitations in the amount of calibration data available for training. By combining the transfer prediction framework with evolutionary algorithms, a robust high-throughput alloy design model is achieved requiring only a small number of data points for reliability.

ACTA MATERIALIA (2022)

Add to Collection

Article Materials Science, Multidisciplinary

A modified cellular automata model for simulation of non-isothermal static recrystallization: a case study on pure copper annealing

Mitra Madani et al.

Summary: This paper simulates the static recrystallization during non-isothermal annealing using a modified probabilistic cellular automata model, which is more accurate than the conventional one. Experimental results show that the modified model can predict annealing kinetics more accurately under different temperature conditions.

APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2022)

Add to Collection

Review Materials Science, Multidisciplinary

Review of high-strength aluminium alloys for additive manufacturing by laser powder bed fusion

Paul A. Rometsch et al.

Summary: In recent years, there has been a growing demand in industries for the development of high-strength aluminium alloys for LPBF, but challenges remain in printability and defect control. To achieve high strength with printability, possible strategies include adapting existing high-strength alloys, designing new alloys specifically for LPBF, and developing aluminium-based composites.

MATERIALS & DESIGN (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Microstructural evolution and mechanical properties of a micro-alloyed low-density ?-TRIP steel

G. Q. Li et al.

Summary: This study addresses the trade-off between strength and ductility in low-density delta-transformation-induced-plasticity steels by controlling the morphology and volume fraction of 8-ferrite. It is found that the thickness and volume fraction of 8-ferrite bands significantly influence the TRIP effect and the initiation and propagation of cracks.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)

Add to Collection

Article Nanoscience & Nanotechnology

In-situ observations of static recrystallization and texture formation in a cold-rolled CoCrFeMnNi high entropy alloy

Baoqi Guo et al.

Summary: This study investigates the static recrystallization and texture development in a cold-rolled CoCrFeMnNi high entropy alloy. Evidence from quasi in-situ electron backscatter diffraction shows that the deformation texture is preserved after recrystallization but weakened. Shear bands act as preferential nucleation sites for recrystallization. In-situ observations using transmission electron microscope reveal that subgrains form through dislocation rearrangement and boundary migration, serving as viable nuclei for recrystallized grains.

SCRIPTA MATERIALIA (2022)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Efficient simulation execution of cellular automata on GPU

Daniel Cagigas-Muniz et al.

Summary: This paper thoroughly studies techniques for efficiently implementing cellular automata (CA) on GPUs, including stencil computing framework, look-up tables, and packet coding. Experimental results show that these techniques can significantly improve performance and achieve the best results among known memory bounded CA implementations.

SIMULATION MODELLING PRACTICE AND THEORY (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Phase transformation and mechanical properties of ultrahigh strength steels under continuous cooling conditions

G. Mandal et al.

Summary: This study investigates the phase transformation mechanical behavior of newly developed ultrahigh strength steels, focusing on the bainitic and martensitic phase transformations and their transformation temperature range and microstructural evidences. The study finds a strong dependency of microstructure and mechanical properties on cooling rate, and the investigated steels exhibit ultrahigh strength and reasonable ductility, attributed to their mixed microstructure and fine precipitates.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

Add to Collection

Article Chemistry, Physical

Additive manufacturing of TTFNZ (Ti-4.5Ta-4Fe-7.5Nb-6Zr), a novel metastable β-titanium alloy for advanced engineering applications

M. A. Ackers et al.

Summary: This study aimed to develop a novel titanium alloy for medical applications using additive manufacturing technology as an alternative to traditional Ti-6Al-4V alloy, with performance evaluation and research on related properties.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Gradient microstructure, recrystallization and mechanical properties of copper processed by high pressure surface rolling

J. Guo et al.

Summary: The microstructure, hardness, and tensile properties of copper processed by high pressure surface rolling (HPSR) were investigated. It was found that HPSR resulted in a gradient structure with significant differences in microstructural features. The deformed microstructure varied from nano- and ultrafine-scale structures near the surface to lightly deformed grains at depths below the surface. Partial recrystallization occurred after annealing, with a more pronounced effect close to the surface. The deformed layer at depths greater than 500 μm remained largely non-recrystallized after annealing.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

Add to Collection

Article Computer Science, Theory & Methods

Dynamic Load Balancing in Parallel Execution of Cellular Automata

Andrea Giordano et al.

Summary: This article focuses on load balancing issues in parallel execution of spatial-related applications and proposes a method for dynamically computing optimal workload assignment. Experimental results demonstrate the performance improvement of this approach compared to the unbalanced version.

IEEE TRANSACTIONS ON PARALLEL AND DISTRIBUTED SYSTEMS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Three-dimensional large-scale grain growth simulation using a cellular automaton model

Jota Ogawa et al.

Summary: The study developed a three-dimensional cellular automaton (3DCA) grain growth model and validated it through large-scale simulations, showing that the grain growth behavior can be quantitatively predicted by this model. The simulation results were similar to ultra-large-scale phase-field (PF) simulations and consistent with analytical models, indicating the potential for significant computational speedup compared to the PF method.

COMPUTATIONAL MATERIALS SCIENCE (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Online prediction of mechanical properties of hot rolled steel plate using machine learning

Qian Xie et al.

Summary: In industrial steel plate production, a deep learning model was developed to predict mechanical properties based on process parameters and steel grade composition. Comparative analysis showed that the accuracy of the deep neural network model was higher than other classic machine learning algorithms. The tuned model was deployed in a real steel plant for online monitoring and control of steel mechanical properties.

MATERIALS & DESIGN (2021)

Add to Collection

Article Materials Science, Multidisciplinary

A machine learning framework for the temporal evolution of microstructure during static recrystallization of polycrystalline materials simulated by cellular automaton

Sepideh Hashemi et al.

Summary: Reduced-order models play a crucial role in studying the process-structure evolution linkages for new materials and advanced technologies. A novel machine learning framework is developed in this paper to capture the temporal evolution of microstructures in FCC polycrystalline materials, showing remarkably accurate and robust results despite the complexity of 3-D microstructures involved.

COMPUTATIONAL MATERIALS SCIENCE (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of prior cold deformation on recrystallization behavior of a multi-phase FeCrCuMnNi high entropy alloy

Ali Shabani et al.

Summary: The study investigated the recrystallization behavior of FeCrCuMnNi high entropy alloy after cold deformation, revealing that different phases require different levels of prior cold deformation for recrystallization. An increase in prior cold deformation led to enhanced recrystallized nuclei, indicating the unique characteristics of HEAs may promote this process. Additionally, higher levels of prior cold deformation resulted in a decline in hardness, UTS, and YS after annealing, with changes in fracture mode observed between FCC1 and FCC2 phases.

MATERIALS CHEMISTRY AND PHYSICS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

A superior strength and sliding-wear resistance combination of ductile iron with nanobainitic matrix

Yuzhou Du et al.

Summary: The nanobainitic matrix in ductile iron, composed of nanoscale a phase and carbon-riched g phase, exhibits superior strength and wear resistance compared to conventionally forged steel GCr15. This is attributed to the homogeneous distribution of spheroidal graphite, resulting in a low friction coefficient and moderate strength in ductile iron.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Optimizing the cellular automata finite element model for additive manufacturing to simulate large microstructures

Kirubel Teferra et al.

Summary: This study introduces the implementation of the cellular automata finite element (CAFE) model for simulating the solidification of additively manufactured materials. The proposed separation of temporal scales improves the computational efficiency and scalability of the model, leading to more accurate simulations of polycrystalline microstructures. The model is validated for 316L stainless steel and further evaluated for different scan patterns to assess their effects on microstructural features.

ACTA MATERIALIA (2021)

Add to Collection

Article Engineering, Civil

Cellular Automata-based computational library for development of digital material representation models of heterogenous microstructures

Konrad Bogun et al.

Summary: This paper presents an efficient numerical approach for generating heterogeneous microstructure models using the lean workflow concept, developing digital material representation models through a cellular automata-based computational library in the C++ programming language, providing flexibility for generating various digital models.

ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Understanding crystallographic orientation, microstructure and mechanical properties dependent interaction between recrystallization and phase transformation of a Fe-Al-Mn-Mo-C dual-phase steel

Hongbo Pan et al.

Summary: The study highlights the competition mechanism between ferritic recrystallization and austenitic transformation during intercritical annealing of Fe-Al-Mn-Mo-C deep drawing dual-phase steel. It was found that an appropriate soaking time contributes to the formation and development of {111} oriented grains, with the promoting effect of austenite transformation exceeding that of ferrite recrystallization. These findings provide insights into the microstructural characteristics and mechanical behaviors of the steel.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Recrystallization in commercial grade interstitial-free steel, discussing criticality of martensite and massive ferrite nucleation along with mechanical property

S. Yadav et al.

Summary: The study optimized the mechanical properties of interstitial-free steel through cold rolling and heat treatment, finding inferior performance in warm-rolled samples. Water quenching of the recrystallized samples revealed phase transformations and grain refinement in the austenitic domain.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Laminated steel/aluminum composites: Improvement of mechanical properties by annealing treatment

Alireza Amanollahi et al.

Summary: A lightweight, laminated carbon steel/6061 aluminum composite was designed and manufactured using cold roll bonding. The sample annealed at 400 degrees C for 90 min showed optimal tensile strength (619 MPa) and ductility (16.1% elongation), with a strength-to-weight ratio of 96.7 and density of 6.4 g/cm(3). Comparatively, there was a 22% increase in strength-to-weight ratio and an 18% decrease in density as compared to commercial low-carbon steel.

MATERIALS TODAY COMMUNICATIONS (2021)

Add to Collection

Article

Capturing Local Material Heterogeneities in Numerical Modelling of Microstructure Evolution

Lukasz Madej et al.

Journal of Machine Engineering (2021)

Add to Collection

Article Mechanics

Neural network segmentation methods for fatigue crack images obtained with X-ray tomography

Ce Xiao et al.

Summary: In this study, an image segmentation method based on convolutional neural network is developed to successfully extract the 3D shapes of internal fatigue cracks in metals, combined with a 'Hessian matrix' filter.

ENGINEERING FRACTURE MECHANICS (2021)

Add to Collection

Article Chemistry, Physical

Scaling Scientific Cellular Automata Microstructure Evolution Model of Static Recrystallization toward Practical Industrial Calculations

Mateusz Sitko et al.

Summary: The research aimed to bridge the gap between advanced full-field microstructure evolution models and their practical applications in industrial technology design by applying high-performance parallelization to the CA-SRX model, achieving efficient simulation of static recrystallization. The study emphasized the effectiveness of parallelization in processing more cells throughout the simulation and demonstrated the potential for speedup over 700 times for 2D and over 800 times for 3D computational domains through communication mechanisms.

MATERIALS (2021)

Add to Collection

Article Computer Science, Interdisciplinary Applications

The role of the cellular automata cell size and time step length in the microstructure evolution model-The static recrystallization case study

Mateusz Sitko et al.

Summary: The paper focuses on identifying and eliminating major factors that can introduce disturbances in predictions of the CA static recrystallization model, developing a new grain nucleation algorithm, and establishing threshold values for CA cell size and time step length to obtain reliable model predictions in an acceptable computational time.

JOURNAL OF COMPUTATIONAL SCIENCE (2021)

Add to Collection

Article Materials Science, Multidisciplinary

A parallel version of the cellular automata static recrystallization model dedicated for high performance computing platforms - Development and verification

Mateusz Sitko et al.

COMPUTATIONAL MATERIALS SCIENCE (2020)

Add to Collection

Article Materials Science, Multidisciplinary

A comparative study of the effect of random and preferred crystallographic orientations on dynamic recrystallization behavior using a cellular automata model

Ashish Alone et al.

MATERIALS TODAY COMMUNICATIONS (2020)

Add to Collection

Article Engineering, Mechanical

Neighborhood effect within polycrystalline materials: Elastoplastic micromechanical analysis by cellular automaton and finite element

R. Bretin et al.

INTERNATIONAL JOURNAL OF FATIGUE (2020)

Add to Collection

Article Materials Science, Multidisciplinary

A mean-field model of static recrystallization considering orientation spreads and their time-evolution

A. Despres et al.

ACTA MATERIALIA (2020)

Add to Collection

Article Engineering, Manufacturing

Modeling precipitation process of Al-Cu alloy in electron beam selective melting with a 3D cellular automaton model

Yefeng Yu et al.

ADDITIVE MANUFACTURING (2020)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Microstructural Changes During Static Recrystallization of Austenitic Stainless Steel 304L: Cellular Automata Simulation

P. Alavi et al.

METALLOGRAPHY MICROSTRUCTURE AND ANALYSIS (2020)

Add to Collection

Article Chemistry, Physical

Recrystallization nucleation in V-4Cr-4Ti alloy

Jianwen Ding et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Formation mechanism of large grains inside annealed microstructure of GH4169 superalloy by cellular automation method

Ming-Song Chen et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)

Add to Collection

Article Computer Science, Theory & Methods

MPI vs Fortran coarrays beyond 100k cores: 3D cellular automata

Anton Shterenlikht et al.

PARALLEL COMPUTING (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Analysis of microstructure characteristics of high sulfur steel based on computer image processing technology

Chen Qilin et al.

RESULTS IN PHYSICS (2019)

Add to Collection

Article Nanoscience & Nanotechnology

In-situ observations and modeling of static recrystallization in 300 M steel

Mingjie Zhao et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Influence of deformation and annealing twinning on the microstructure and texture evolution of face-centered cubic high-entropy alloys

Christian Haase et al.

ACTA MATERIALIA (2018)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Modelling fracture in heterogeneous materials on HPC systems using a hybrid MPI/Fortran coarray multi-scale CAFE framework

A. Shterenlikht et al.

ADVANCES IN ENGINEERING SOFTWARE (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Coupled simulation of ferrite recrystallization in a dual-phase steel considering deformation heterogeneity at mesoscale

Gang Shen et al.

COMPUTATIONAL MATERIALS SCIENCE (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Computationally Efficient Phase-field Simulation Studies Using RVE Sampling and Statistical Analysis

Christian Schwarze et al.

COMPUTATIONAL MATERIALS SCIENCE (2018)

Add to Collection

Article Engineering, Industrial

The evolution of the microstructure in AISI 304L stainless steel during the flat rolling - modeling by frontal cellular automata and verification

Lukasz Lach et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)

Add to Collection

Article Computer Science, Interdisciplinary Applications

A parallel implementation of a cloud dynamics model with cellular automaton

Alisson R. Silva et al.

MATHEMATICS AND COMPUTERS IN SIMULATION (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Generation of statistically representative synthetic three-dimensional microstructures

Sudipto Mandal et al.

SCRIPTA MATERIALIA (2018)

Add to Collection

Article Materials Science, Multidisciplinary

A new topological approach for the mean field modeling of dynamic recrystallization

Ludovic Maire et al.

MATERIALS & DESIGN (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Modelling discontinuous dynamic recrystallization using a quantitative multi-order-parameter phase-field method

Namin Xiao et al.

COMPUTATIONAL MATERIALS SCIENCE (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Modeling and Simulation of the Static Recrystallization of 5754 Aluminium Alloy by Cellular Automaton

Changqing Huang et al.

METALS (2018)

Add to Collection

Article Green & Sustainable Science & Technology

Visualization and prediction of supercritical CO2 distribution in sandstones during drainage: An in situ synchrotron X-ray micro-computed tomography study

Marco Voltolini et al.

INTERNATIONAL JOURNAL OF GREENHOUSE GAS CONTROL (2017)

Add to Collection

Article Mechanics

An extended vertex and crystal plasticity framework for efficient multiscale modeling of polycrystalline materials

Ylva Mellbin et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2017)

Add to Collection

Article Engineering, Biomedical

Micro-CT based finite element models for elastic properties of glass-ceramic scaffolds

Stefano Tagliabue et al.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Simulation of CP-Ti Recrystallization and Grain Growth by a Cellular Automata Algorithm: Simulated Versus Experimental Results

Rodrigo Jose Contieri et al.

MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Effect of initial grain size on the recrystallization and recrystallization texture of cold-rolled AA 5182 aluminum alloy

J. X. Zhang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)

Add to Collection

Article Materials Science, Multidisciplinary

A highly efficient 3D level-set grain growth algorithm tailored for ccNUMA architecture

C. Miessen et al.

MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2017)

Add to Collection

Proceedings Paper Computer Science, Information Systems

Dynamic load balancing for CAFE multiscale modelling methods for heterogeneous hardware infrastructure

Lukasz Rauch et al.

INTERNATIONAL CONFERENCE ON COMPUTATIONAL SCIENCE (ICCS 2017) (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Generation of 3D polycrystalline microstructures with a conditioned Laguerre-Voronoi tessellation technique

Simone Falco et al.

COMPUTATIONAL MATERIALS SCIENCE (2017)

Add to Collection

Article Materials Science, Multidisciplinary

A statistical ensemble cellular automaton microstructure model for primary recrystallization

M. Kuehbach et al.

ACTA MATERIALIA (2016)

Add to Collection

Article Engineering, Civil

Cellular automata model for prediction of crack initiation and propagation in hot forging tools

Lukasz Rauch et al.

ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2016)

Add to Collection

Review Engineering, Civil

Perceptive comparison of mean and full field dynamic recrystallization models

Lukasz Madej et al.

ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2016)

Add to Collection

Article Materials Science, Multidisciplinary

3D level set modeling of static recrystallization considering stored energy fields

Benjamin Scholtes et al.

COMPUTATIONAL MATERIALS SCIENCE (2016)

Add to Collection

Article Engineering, Multidisciplinary

Finite element numerical integration for first order approximations on multi- and many-core architectures

Krzysztof Banas et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Validation and predictions of coupled finite element and cellular automata model: Influence of the degree of deformation on static recrystallization kinetics case study

Lukasz Madej et al.

MATERIALS CHEMISTRY AND PHYSICS (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Recrystallization and texture evolution during hot rolling of copper, studied by a multiscale model combining crystal plasticity and vertex models

Y. Mellbin et al.

MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Study of static recrystallization behavior in hot deformed Ni-based superalloy using cellular automaton model

Y. C. Lin et al.

MATERIALS & DESIGN (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Kinetics and anisotropy of the Monte Carlo model of grain growth

J. K. Mason et al.

ACTA MATERIALIA (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Grain boundary energy and curvature in Monte Carlo and cellular automata simulations of grain boundary motion

J. K. Mason

ACTA MATERIALIA (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Recrystallization behavior of a high-manganese steel: Experiments and simulations

Christian Haase et al.

ACTA MATERIALIA (2015)

Add to Collection

Article Materials Science, Multidisciplinary

An advanced level set approach to grain growth - Accounting for grain boundary anisotropy and finite triple junction mobility

C. Miessen et al.

ACTA MATERIALIA (2015)

Add to Collection

Article Materials Science, Multidisciplinary

New finite element developments for the full field modeling of microstructural evolutions using the level-set method

Benjamin Scholtes et al.

COMPUTATIONAL MATERIALS SCIENCE (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Nano level optimization of graphene allotropes by means of a hybrid parallel evolutionary algorithm

Adam Mrozek et al.

COMPUTATIONAL MATERIALS SCIENCE (2015)

Add to Collection

Article Materials Science, Multidisciplinary

2D finite element modeling of misorientation dependent anisotropic grain growth in polycrystalline materials: Level set versus multi-phase-field method

Y. Jin et al.

COMPUTATIONAL MATERIALS SCIENCE (2015)

Add to Collection

Article Materials Science, Multidisciplinary

A mean field model of dynamic and post-dynamic recrystallization predicting kinetics, grain size and flow stress

O. Beltran et al.

COMPUTATIONAL MATERIALS SCIENCE (2015)

Add to Collection

Article Computer Science, Hardware & Architecture

Performance analysis of Cellular Automata HPC implementations

Emmanuel N. Millan et al.

COMPUTERS & ELECTRICAL ENGINEERING (2015)

Add to Collection

Article Engineering, Mechanical

In-situ observation of bulk 3D grain evolution during plastic deformation in polycrystalline Cu

Reeju Pokharel et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2015)

Add to Collection

Article Computer Science, Theory & Methods

An investigation of the efficient implementation of cellular automata on multi-core CPU and GPU hardware

Michael J. Gibson et al.

JOURNAL OF PARALLEL AND DISTRIBUTED COMPUTING (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Strain induced grain boundary migration effects on grain growth of an austenitic stainless steel during static and metadynamic recrystallization

A. Paggi et al.

MATERIALS CHARACTERIZATION (2015)

Add to Collection

Article Metallurgy & Metallurgical Engineering

ACCOUNTING FOR THE INHOMOGENEITY OF DEFORMATION IN IDENTIFICATION OF MICROSTRUCTURE EVOLUTION MODEL

D. Szeliga et al.

ARCHIVES OF METALLURGY AND MATERIALS (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of grain boundary energy anisotropy on highly textured grain structures studied by phase-field simulations

Kunok Chang et al.

ACTA MATERIALIA (2014)

Add to Collection

Article Engineering, Civil

Discrete micro-scale cellular automata model for modelling phase transformation during heating of dual phase steels

C. Halder et al.

ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2014)

Add to Collection

Article Materials Science, Multidisciplinary

Cellular automaton simulation of hot deformation of TRIP steel

Ying Zhi et al.

COMPUTATIONAL MATERIALS SCIENCE (2014)

Add to Collection

Review Materials Science, Multidisciplinary

Perspectives for cellular automata for the simulation of dendritic solidification - A review

K. Reuther et al.

COMPUTATIONAL MATERIALS SCIENCE (2014)

Add to Collection

Article Materials Science, Multidisciplinary

Phase-field simulation of static recrystallization considering nucleation from subgrains and nucleus growth with incubation period

M. Muramatsu et al.

COMPUTATIONAL MATERIALS SCIENCE (2014)

Add to Collection

Article Mathematics, Applied

Numerical integration on GPUs for higher order finite elements

Krzysztof Banas et al.

COMPUTERS & MATHEMATICS WITH APPLICATIONS (2014)

Add to Collection

Article Materials Science, Multidisciplinary

A massively parallel cellular automaton for the simulation of recrystallization

M. Kuehbach et al.

MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2014)

Add to Collection

Article Materials Science, Multidisciplinary

Laboratory micro- and nanoscale X-ray tomographic investigation of Al-7 at.%Cu solidification structures

B. M. Patterson et al.

MATERIALS CHARACTERIZATION (2014)

Add to Collection

Article Engineering, Manufacturing

DREAM. 3D: A Digital Representation Environment for the Analysis of Microstructure in 3D

Michael A. Groeber et al.

INTEGRATING MATERIALS AND MANUFACTURING INNOVATION (2014)

Add to Collection

Article Materials Science, Multidisciplinary

Interaction between recrystallization and phase transformation during intercritical annealing in a cold-rolled dual-phase steel: A cellular automaton model

Chengwu Zheng et al.

ACTA MATERIALIA (2013)

Add to Collection

Article Computer Science, Interdisciplinary Applications

A cloud computing based framework for general 2D and 3D cellular automata simulation

Rodrigo Marques et al.

ADVANCES IN ENGINEERING SOFTWARE (2013)

Add to Collection

Article Materials Science, Multidisciplinary

Multi scale cellular automata and finite element based model for cold deformation and annealing of a ferritic-pearlitic microstructure

L. Madej et al.

COMPUTATIONAL MATERIALS SCIENCE (2013)

Add to Collection

Article Materials Science, Multidisciplinary

A perceptive comparison of the cellular automata and Monte Carlo techniques in application to static recrystallization modeling in polycrystalline materials

Lukasz Sieradzki et al.

COMPUTATIONAL MATERIALS SCIENCE (2013)

Add to Collection

Article Materials Science, Multidisciplinary

Simulation of static softening behavior of an aluminum alloy after cold strip rolling

M. Seyed Salehi et al.

COMPUTATIONAL MATERIALS SCIENCE (2013)

Add to Collection

Article Materials Science, Multidisciplinary

Cellular automata modeling of static recrystallization based on the curvature driven subgrain growth mechanism

Fengbo Han et al.

JOURNAL OF MATERIALS SCIENCE (2013)

Add to Collection

Article Materials Science, Multidisciplinary

Grain growth prediction with inclination dependence of ⟨1 1 0⟩ tilt grain boundary using multi-phase-field model with penalty for multiple junctions

Tomoyuki Hirouchi et al.

COMPUTATIONAL MATERIALS SCIENCE (2012)

Add to Collection

Article Materials Science, Multidisciplinary

Reorganization of cellular space during the modeling of the microstructure evolution by frontal cellular automata

Dmytro S. Svyetlichnyy

COMPUTATIONAL MATERIALS SCIENCE (2012)

Add to Collection

Article Nanoscience & Nanotechnology

Level set framework for the finite-element modelling of recrystallization and grain growth in polycrystalline materials

M. Bernacki et al.

SCRIPTA MATERIALIA (2011)

Add to Collection

Article Astronomy & Astrophysics

3D imaging in material science: Application of X-ray tomography

Luc Salvo et al.

COMPTES RENDUS PHYSIQUE (2010)

Add to Collection

Article Materials Science, Multidisciplinary

Modelling of the microstructure: From classical cellular automata approach to the frontal one

D. S. Svyetlichnyy

COMPUTATIONAL MATERIALS SCIENCE (2010)

Add to Collection

Article Engineering, Mechanical

Static recrystallization simulations starting from predicted deformation microstructure by coupling multi-phase-field method and finite element method based on crystal plasticity

T. Takaki et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2010)

Add to Collection

Article Materials Science, Multidisciplinary

Simulation of recrystallization in cold worked stainless steel and its effect on chromium depletion by cellular automaton

Xiaofei Yu et al.

COMPUTATIONAL MATERIALS SCIENCE (2009)

Add to Collection

Article Materials Science, Multidisciplinary

Mesoscopic modeling of austenite static recrystallization in a low carbon steel using a coupled simulation method

Chengwu Zheng et al.

COMPUTATIONAL MATERIALS SCIENCE (2009)

Add to Collection

Article Computer Science, Interdisciplinary Applications

A software framework for fine grain parallelization of cellular models with OpenMP: Application to fire spread

Eric Innocenti et al.

ENVIRONMENTAL MODELLING & SOFTWARE (2009)

Add to Collection

Article Materials Science, Multidisciplinary

Stochastic vertex model of recrystallization

K. Piekos et al.

COMPUTATIONAL MATERIALS SCIENCE (2008)

Add to Collection

Article Materials Science, Multidisciplinary

Generalized vertex model of recrystallization - Application to polycrystalline copper

K. Piekos et al.

COMPUTATIONAL MATERIALS SCIENCE (2008)

Add to Collection

Article Nanoscience & Nanotechnology

Level set framework for the numerical modelling of primary recrystallization in polycrystalline materials

M. Bernacki et al.

SCRIPTA MATERIALIA (2008)

Add to Collection

Article Materials Science, Multidisciplinary

Modeling recrystallization in a material containing fine and coarse particles

Xiaoyan Song et al.

COMPUTATIONAL MATERIALS SCIENCE (2007)

Add to Collection

Article Computer Science, Theory & Methods

An efficient implementation of a 3D wavelet transform based encoder on hyper-threading technology

Gregorio Bernabe et al.

PARALLEL COMPUTING (2007)

Add to Collection

Article Materials Science, Multidisciplinary

A cellular operator model for the simulation of static recrystallization

P. Mukhopadhyay et al.

ACTA MATERIALIA (2007)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Phase-field model during static recrystallization based on crystal-plasticity theory

T. Takaki et al.

JOURNAL OF COMPUTER-AIDED MATERIALS DESIGN (2007)

Add to Collection

Article Materials Science, Multidisciplinary

Study of the influence of initial microstructure topology on the kinetics of static recrystallization using a cellular automata model

G. Kugler et al.

COMPUTATIONAL MATERIALS SCIENCE (2006)

Add to Collection

Article Nanoscience & Nanotechnology

3D reconstruction of microstructure in a commercial purity aluminum

A. Brahme et al.

SCRIPTA MATERIALIA (2006)

Add to Collection

Article Computer Science, Theory & Methods

A model based on cellular automata for the parallel simulation of 3D unsaturated flow

Gianluigi Folino et al.

PARALLEL COMPUTING (2006)

Add to Collection

Article Materials Science, Multidisciplinary

2D cellular automaton simulation of the recrystallization texture of an IF sheet steel under consideration of Zener pinning

D Raabe et al.

COMPUTATIONAL MATERIALS SCIENCE (2005)

Add to Collection

Article Nanoscience & Nanotechnology

Evaluation of stored energy in cold-rolled steels from EBSD data

SH Choi et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)

Add to Collection

Article Materials Science, Multidisciplinary

Simulation of stored energy and orientation gradients in cold-rolled interstitial free steels

SH Choi

ACTA MATERIALIA (2003)

Add to Collection

Article Nanoscience & Nanotechnology

Modelling study on recrystallization, recovery and their temperature dependence in inhomogeneously deformed materials

XY Song et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2002)

Add to Collection

Article Materials Science, Multidisciplinary

Micromechanical and macromechanical effects in grain scale polycrystal plasticity experimentation and simulation

D Raabe et al.

ACTA MATERIALIA (2001)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Level set methods: An overview and some recent results

S Osher et al.

JOURNAL OF COMPUTATIONAL PHYSICS (2001)

Add to Collection

Article Materials Science, Multidisciplinary

A hybrid model for mesoscopic simulation of recrystallization

AD Rollett et al.

COMPUTATIONAL MATERIALS SCIENCE (2001)

Add to Collection

Article Computer Science, Theory & Methods

Parallel processing simulation of dynamic properties of filled rubber compounds based on cellular automata

S Bandini et al.

PARALLEL COMPUTING (2001)

Add to Collection

Article Materials Science, Multidisciplinary

Work hardening in heterogeneous alloys - A microstructural approach based on three internal state variables

F Roters et al.

ACTA MATERIALIA (2000)

Add to Collection

Article Materials Science, Multidisciplinary

Coupling of a crystal plasticity finite-element model with a probabilistic cellular automaton for simulating primary static recrystallization in aluminium

D Raabe et al.

MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2000)

Add to Collection

Article Nanoscience & Nanotechnology

Microstructural modelling of aluminium alloys during thermomechanical processing

CM Sellars et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.