☆ 4.7 Article

Hematite nanoparticle decorated MIL-100 for the highly selective and sensitive electrochemical detection of trace-level paraquat in milk and honey

SENSORS AND ACTUATORS B-CHEMICAL (2023)

Related references

Note: Only part of the references are listed.

Article Engineering, Environmental

Three-dimensional porous high boron-nitrogen-doped carbon for the ultrasensitive electrochemical detection of trace heavy metals in food samples

Ruihua Huang et al.

Summary: This study proposes a boron and nitrogen co-doped carbon material derived from a metal-organic framework material for the detection of heavy metal ions in food. The sensor shows good sensitivity and selectivity for Cd(II) and Pb(II), and has potential applications in complex samples.

JOURNAL OF HAZARDOUS MATERIALS (2023)

Add to Collection

Article Chemistry, Applied

Electrochemical sensor for detecting streptomycin in milk based on label-free aptamer chain and magnetic adsorption

Li Wang et al.

Summary: This study proposes an electrochemical sensor for the efficient detection of streptomycin in milk, using magnetic mesoporous carbon materials as a loaded material and unlabeled streptomycin aptamer as the identification element. The sensor demonstrates high sensitivity, wide detection range, and low detection limit, providing a rapid and sensitive method for streptomycin detection in milk.

FOOD CHEMISTRY (2023)

Add to Collection

Article Biochemical Research Methods

Quantification and toxicokinetics of paraquat in mouse plasma and lung tissues by internal standard surface-enhanced Raman spectroscopy

Luyuan Qin et al.

Summary: In this study, an internal standard surface-enhanced Raman spectroscopy (IS-SERS) quantification method was developed to determine the concentration of paraquat in mouse plasma and lung tissues. The results showed that paraquat had a high absorption rate and slow elimination rate in mice, and it tended to accumulate in target organs after entering the blood. The IS-SERS method demonstrated good practical applicability.

ANALYTICAL AND BIOANALYTICAL CHEMISTRY (2022)

Add to Collection

Article Chemistry, Multidisciplinary

A Water-Stable Lanthanide-Based MOF as a Highly Sensitive Sensor for the Selective Detection of Paraquat in Agricultural Products

Theanchai Wiwasuku et al.

Summary: In this study, a water-stable 3D lanthanide-based MOF (Tb-MOF) is developed as a sensitive and selective sensor for the detection of toxic paraquat. The Tb-MOF shows a dramatic luminescence quenching in the presence of paraquat, offering high sensitivity and selectivity even in the presence of common contaminants. The MOF-based sensor can be practically implemented for the detection of paraquat in the environment and agricultural products.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2022)

Add to Collection

Article Chemistry, Applied

Selective carbonaceous-based (nano)composite sensors for electrochemical determination of paraquat in food samples

Mercia V. S. Sant'Anna et al.

Summary: A novel electrochemical sensor based on activated biochar and reduced graphene oxide was developed for the detection of paraquat in food samples. The sensor showed good response and high selectivity under optimized conditions, with a linear range from 0.74 to 9.82 μmol L-1 and a limit of detection of 0.02 μmol L-1.

FOOD CHEMISTRY (2022)

Add to Collection

Article Biochemical Research Methods

Synchronous electrochemical detection of dopamine and uric acid by a PMo12@MIL-100(Fe)@PVP nanocomposite

Xiao Liu et al.

Summary: A high-performance electrochemical sensor for synchronous detection of dopamine and uric acid has been successfully developed using a noble-metal-free composite electrode. The electrode exhibits large specific surface area and high electrical conductivity, leading to high electrocatalytic oxidation performance of dopamine and uric acid.

ANALYTICAL BIOCHEMISTRY (2022)

Add to Collection

Article Biophysics

Sensitive and selective electrochemical determination of uric acid in urine based on ultrasmall iron oxide nanoparticles decorated urchin-like nitrogen-doped carbon

Tingfan Tang et al.

Summary: In this study, hypercrosslinked pyrrole was synthesized via the Friedel-Crafts reaction and then carbonized to obtain UNC material. Ultrasmall iron oxide nanoparticles were supported on UNC and used to prepare an electrochemical sensor for detecting uric acid in urine. The sensor exhibited high sensitivity and selectivity and can be used for actual clinical testing of uric acid in urine.

COLLOIDS AND SURFACES B-BIOINTERFACES (2022)

Add to Collection

Article Chemistry, Analytical

Star-shaped porous nitrogen-doped metal-organic framework carbon as an electrochemical platform for sensitive determination of Cd(II) in environmental and tobacco samples

Ruihua Huang et al.

Summary: In this study, cetyltrimethylammonium bromide and zeolitic imidazolate framework-8 (ZIF-8) were assembled via chemical co-precipitation, and high-quality carbon-based metal-free nanomaterials were synthesized using heat treatment. The internal and morphological characteristics of hexagonal Star ZIF-8 were investigated. An electrochemical sensor with a good response to Cd(II) was prepared using Star ZIF-8 nanomaterial-modified electrodes. The sensitivity of the sensor was increased by five orders of magnitude.

ANALYTICA CHIMICA ACTA (2022)

Add to Collection

Article Chemistry, Physical

A novel kaempferol electrochemical sensor based on glass carbon electrode modified by poly (3, 4-ethylenedioxythiophene) decorated with green synthesized MIL-100(Fe)-multi- walled carbon nanotubes composites

Li Zhang et al.

Summary: A novel KA electrochemical sensor based on MIL-100(Fe)-multi-walled-carbon nanotubes/poly(3,4-ethylenedioxythiophene) (MIL-100(Fe)-MWCNTs/PEDOT) composite modified glass carbon electrode was proposed in this study. The sensor exhibited good linear range and low detection limit for detecting KA, and showed satisfactory sensitivity and accuracy in real samples.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2022)

Add to Collection

Article Environmental Sciences

Mesoporous carbon decorated with MIL-100(Fe) as an electrochemical platform for ultrasensitive determination of trace cadmium and lead ions in surface water

Yelin Zhu et al.

Summary: In this work, MIL-100(Fe)-decorated mesoporous carbon powders were synthesized and applied for electrochemical detection of trace amounts of Pb(II) and Cd(II). The fabricated electrochemical sensor showed excellent response to the target analytes, and exhibited good analytical performance under optimized conditions. The MIL-100(Fe)-decorated mesoporous carbon powders can be potentially used as an electrochemical platform for monitoring heavy metals in surface water.

ECOTOXICOLOGY AND ENVIRONMENTAL SAFETY (2022)

Add to Collection

Review Engineering, Environmental

Advances made in removing paraquat herbicide by adsorption technology: A review

Dison S. P. Franco et al.

Summary: This review analyzed papers that use adsorption to remove paraquat herbicide from aqueous effluents, and also discussed the contamination and toxicology aspects of paraquat. It was found that silicate and carbon materials are the best adsorbents, and the most commonly used isotherm models are Langmuir and Freundlich. However, most studies did not report the pH of the solution or optimize the adsorption conditions.

JOURNAL OF WATER PROCESS ENGINEERING (2022)

Add to Collection

Article Environmental Sciences

Different degradation mechanisms of low-concentration ozone for MIL-100 (Fe) and MIL-100(Mn) over wide humidity fluctuation

Guanqing Song et al.

Summary: The synergistic control of ozone and fine particulate matter is an important research topic in the field of environmental studies. This study focused on the degradation of ozone pollutants using MIL-100(Fe) and MIL-100(Mn) materials. The results showed that MIL-100(Fe) exhibited superior photocatalytic activity, while MIL-100(Mn) had better catalytic efficiency at normal temperatures. The optimal photocatalytic performance of MIL-100(Fe) was observed at 10% humidity, while MIL-100(Mn) showed consistent catalytic degradation efficiency at humidity levels ranging from 10% to 90%. The degradation mechanism was proposed based on in-situ DRIFTS and ESR analysis, which were correlated with oxygen vacancy and photogenerated electron efficiency. Temperature Programmed Desorption (TPD) analysis detected a large number of Lewis acid sites in MIL-100(Mn), which contributed to its excellent performance in normal temperature degradation under high humidity. This work expands the practical application of ozone removal and improves degradation efficiency.

CHEMOSPHERE (2022)

Add to Collection

Article Engineering, Environmental

Magnetic recyclable g-C3N4/Fe3O4@MIL-100(Fe) ternary catalyst for photo-Fenton degradation of ciprofloxacin

Wenjuan He et al.

Summary: In this study, a novel catalyst was prepared to enhance the efficiency of photocatalytic degradation of ciprofloxacin. The results showed that the catalyst exhibited excellent photo-Fenton catalytic activity and good reusability.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2022)

Add to Collection

Article Environmental Sciences

Two-dimensional BCN nanosheets self-assembled with hematite nanocrystals for sensitively detecting trace toxic Pb(II) ions in natural water

Yelin Zhu et al.

Summary: In this study, hematite-boron-carbonitride (Fe2O3-BCN) nanosheets were synthesized and used to fabricate an electrochemical sensor for lead ions (Pb(II)), showing excellent linear relationship and sensitivity in the detection range. The Fe2O3-BCN-based electrochemical sensor demonstrated high selectivity and anti-interference ability, making it a promising tool for environmental monitoring of Pb(II).

ECOTOXICOLOGY AND ENVIRONMENTAL SAFETY (2021)

Add to Collection

Review Toxicology

The herbicide paraquat-induced molecular mechanisms in the development of acute lung injury and lung fibrosis

Rajasekaran Subbiah et al.

Summary: This review summarizes the latest publications related to paraquat-induced lung toxicity and the underlying molecular mechanisms. Paraquat poisoning mainly causes acute lung injury/acute respiratory distress syndrome, followed by pulmonary fibrosis.

CRITICAL REVIEWS IN TOXICOLOGY (2021)

Add to Collection

Article Chemistry, Analytical

A new perspective for electrochemical determination of parathion and chlorantraniliprole pesticides via carbon nanotube-based thiophene-ferrocene appended hybrid nanosensor

Sureyya Oguz Tumay et al.

Summary: The study developed an electrochemical method for simultaneous determination of parathion and chlorantraniliprole pesticides using a novel hybrid nanomaterial. The method showed high sensitivity and selectivity for detecting pesticide residues in food and soil samples, making it a promising alternative to other analytical techniques.

SENSORS AND ACTUATORS B-CHEMICAL (2021)

Add to Collection

Article Engineering, Chemical

MIL-100(Fe)-derived carbon sponge as high-performance material for oil/water separation

Marta Bauza et al.

Summary: Highly hydrophobic and oleophilic hybrid porous sponges were prepared by coating commercial melamine-formaldehyde sponges with a porous carbon derived from a mesoporous metal-organic framework MIL-100(Fe). These hybrid sponges exhibited excellent oil-water separation capabilities, with good absorption capacity and easy regenerability, and showed impressive oil-absorption abilities even in real saltwater samples when used in conjunction with a vacuum system.

SEPARATION AND PURIFICATION TECHNOLOGY (2021)

Add to Collection

Article Engineering, Environmental

Facile synthesis of Fe3O4@MIL-100(Fe) towards enhancing photo-Fenton like degradation of levofloxacin via a synergistic effect between Fe3O4 and MIL-100(Fe)

Wenjuan He et al.

Summary: In this study, Fe3O4@MIL-100(Fe) hybrid composites were successfully synthesized and showed high degradation efficiency and recyclability in photo-Fenton like processes. The synergistic effect between Fe3O4 and MIL-100(Fe) was found to contribute to the enhanced catalytic activity. The composites also demonstrated potential for wastewater treatment applications with significant removal efficiencies for levofloxacin.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Chemistry, Physical

Facile Synthesis of Iron-Based MOFs MIL-100(Fe) as Heterogeneous Catalyst in Kabachnick Reaction

Noura Elsayed Elharony et al.

Summary: An effective technique for the synthesis of novel alpha-aminophosphonates was proposed using MIL-100(Fe) as a heterogeneous catalyst, showing exceptional catalytic performance with high yield and turnover frequency at room temperature. The study demonstrated the ecofriendly and easily recyclable nature of MIL-100(Fe) in the synthesis of alpha-aminophosphonates.

CATALYSTS (2021)

Add to Collection

Article Engineering, Environmental

Mesoporous cerium oxide-anchored magnetic polyhedrons derived from MIL-100(Fe) for enhanced removal of arsenite from aqueous solution

Jiang-Bo Huo et al.

Summary: A novel nanocomposite, Fe2O3/CeO2, was prepared and showed great efficiency in removing As(III) from drinking water and wastewater, with a removal rate almost 9 times faster than unmodified Fe2O3. The composite exhibited high adsorption capacity and easy regeneration, allowing for convenient separation and recycling with external magnets.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Add to Collection

Article Food Science & Technology

A Fluorescent Detection for Paraquat Based on β-CDs-Enhanced Fluorescent Gold Nanoclusters

Hong-Xin Ren et al.

Summary: This report proposed a fluorescent sensing method for paraquat based on gold nanoclusters. The modification of beta-cyclodextrins on the surface of AuNCs enhanced the sensitivity and selectivity of the detection. With optimized conditions, the method demonstrated a linear response and high recoveries when applied to paraquat-spiked water samples. This study highlights the potential of host molecule modification of fluorescent metal NC surfaces in developing robust sensors.

FOODS (2021)

Add to Collection

Article Food Science & Technology

Electrochemical Sensor Based on Beeswax and Carbon Black Thin Biofilms for Determination of Paraquat in Apis mellifera Honey

Daniel Cardoso de Souza et al.

Summary: The study focuses on using beeswax and carbon black film to enhance the sensitivity of paraquat detection, offering an alternative strategy for monitoring herbicides in honey samples.

FOOD ANALYTICAL METHODS (2021)

Add to Collection

Article Chemistry, Analytical

A novel disposable electrochemical sensor based on modifying graphite pencil lead electrode surface with nanoacetylene black for simultaneous determination of antiandrogens flutamide and cyproterone acetate

Hossieny Ibrahim et al.

JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2020)

Add to Collection

Article Chemistry, Analytical

Graphene oxide orientated by a magnetic field and application in sensitive detection of chemical oxygen demand

Xiaolu Li et al.

ANALYTICA CHIMICA ACTA (2020)

Add to Collection

Article Engineering, Environmental

Novel mesoporous chitosan-zirconia-ferrosoferric oxide as magnetic composite for defluoridation of water

Sanjiwani Korde et al.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2020)

Add to Collection

Article Engineering, Environmental

Rapid in situ microwave synthesis of Fe3O4@MIL-100(Fe) for aqueous diclofenac sodium removal through integrated adsorption and photodegradation

Sijia Li et al.

JOURNAL OF HAZARDOUS MATERIALS (2019)

Add to Collection

Article Nanoscience & Nanotechnology

A novel electrochemical sensor based on Au nanoparticles/8-aminoquinoline functionalized graphene oxide nanocomposite for paraquat detection

Fen-Ying Kong et al.

NANOTECHNOLOGY (2019)

Add to Collection

Article Chemistry, Physical

Surface functionalization of smectite-type clay by facile polymerization of β-cyclodextrin using citric acid cross linker: Application as sensing material for the electrochemical determination of paraquat

Herve L. Tcheumi et al.

APPLIED CLAY SCIENCE (2019)

Add to Collection

Article Food Science & Technology

Determination of Paraquat Residues in Palm Oil by High-Performance Liquid Chromatography with UV and Tandem Mass Spectrometry

Norizah Halim et al.

EUROPEAN JOURNAL OF LIPID SCIENCE AND TECHNOLOGY (2019)

Add to Collection

Article Chemistry, Analytical

A highly sensitive and selective on-off-on fluorescent sensor based on nitrogen doped graphene quantum dots for the detection of Hg2+ and paraquat

Fuyou Du et al.

SENSORS AND ACTUATORS B-CHEMICAL (2019)

Add to Collection

Article Multidisciplinary Sciences

Hydrothermal Synthesize of HF-Free MIL-100(Fe) for Isoniazid-Drug Delivery

Meta A. Simon et al.

SCIENTIFIC REPORTS (2019)

Add to Collection

Article Engineering, Environmental

Novel room-temperature synthesis of MIL-100(Fe) and its excellent adsorption performances for separation of light hydrocarbons

Binqin Yuan et al.

CHEMICAL ENGINEERING JOURNAL (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Mechanistic Insight into Photocatalytic Pathways of MIL-100(Fe)/TiO2 Composites

Xiang He et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection

Article Multidisciplinary Sciences

Data on study of hematite nanoparticles obtained from Iron(III) oxide by the Pechini method

Monica Andrea Vargas et al.

DATA IN BRIEF (2019)

Add to Collection

Article Chemistry, Physical

Mn-MIL-100 heterogeneous catalyst for the selective oxidative cleavage of alkenes to aldehydes

Ying Ha et al.

CATALYSIS COMMUNICATIONS (2018)

Add to Collection

Article Chemistry, Analytical

Electrochemical sensor based on phospholipid modified glassy carbon electrode - determination of paraquat

H. Tomkova et al.

JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Mesoporous Silica Thin Films for Improved Electrochemical Detection of Paraquat

Tauqir Nasir et al.

ACS SENSORS (2018)

Add to Collection

Review Chemistry, Medicinal

Exploring the potential benefit of natural product extracts in paraquat toxicity

Zacharias E. Suntres

FITOTERAPIA (2018)

Add to Collection

Article Chemistry, Analytical

A sensitive electrochemical sensor for flavonoids based on a multi-walled carbon paste electrode modified by cetyltrimethyl ammonium bromide-carboxylic multi-walled carbon nanotubes

Zhixian Liang et al.

SENSORS AND ACTUATORS B-CHEMICAL (2017)

Add to Collection

Article Chemistry, Analytical

Sequential injection differential pulse voltammetric method based on screen printed carbon electrode modified with carbon nanotube/Nafion for sensitive determination of paraquat

Prakit Chuntib et al.

TALANTA (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Robust Pitaya-Structured Pyrite as High Energy Density Cathode for High-Rate Lithium Batteries

Xijun Xu et al.

ACS NANO (2017)

Add to Collection

Article Chemistry, Analytical

Carbon Paste Electrode Modified with Biochar for Sensitive Electrochemical Determination of Paraquat

Cristiane Kalinke et al.

ELECTROANALYSIS (2016)

Add to Collection

Article Chemistry, Physical

Synthesis of Bimetallic MOFs MIL-100(Fe-Mn) as an Efficient Catalyst for Selective Catalytic Reduction of NO x with NH3

Wang Zhang et al.

CATALYSIS LETTERS (2016)

Add to Collection

Article Biochemical Research Methods

Optimized ultra performance liquid chromatography tandem high resolution mass spectrometry method for the quantification of paraquat in plasma and urine

Haihua Lu et al.

JOURNAL OF CHROMATOGRAPHY B-ANALYTICAL TECHNOLOGIES IN THE BIOMEDICAL AND LIFE SCIENCES (2016)

Add to Collection

Article Chemistry, Physical

Mesoporous Mo2C/N-doped carbon heteronanowires as high-rate and long-life anode materials for Li-ion batteries

Lichun Yang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2016)

Add to Collection

Article Electrochemistry

Fabrication of polypyrrole-grafted nitrogen-doped graphene and its application for electrochemical detection of paraquat

Ji Li et al.

ELECTROCHIMICA ACTA (2015)

Add to Collection

Article Multidisciplinary Sciences

Hematite Nanoparticles-Modified Electrode Based Electrochemical Sensing Platform for Dopamine

Khosro Zangeneh Kamali et al.

SCIENTIFIC WORLD JOURNAL (2014)

Add to Collection

Article Chemistry, Multidisciplinary

Formation and characterisation of Mn-MIL-100

Helge Reinsch et al.

CRYSTENGCOMM (2013)

Add to Collection

Review Chemistry, Analytical

Square-Wave Voltammetry: A Review on the Recent Progress

Valentin Mirceski et al.

ELECTROANALYSIS (2013)

Add to Collection

Article Chemistry, Analytical

Square-wave voltammetric determination of paraquat using a glassy carbon electrode modified with multiwalled carbon nanotubes within a dihexadecylhydrogenphosphate (DHP) film

Livia Luiza Costa Garcia et al.

SENSORS AND ACTUATORS B-CHEMICAL (2013)

Add to Collection

Article Environmental Sciences

A review on environmental exposure and health risks of herbicide paraquat

Wen-Tien Tsai

TOXICOLOGICAL AND ENVIRONMENTAL CHEMISTRY (2013)

Add to Collection

Article Chemistry, Analytical

Amperometric sensors based on sawdust film modified electrodes: Application to the electroanalysis of paraquat

Gustave Kenne Dedzo et al.

TALANTA (2012)

Add to Collection

Article Chemistry, Applied

Square wave voltammetry for analytical determination of paraquat at carbon paste electrode modified with fluoroapatite

M. A. El Mhammedi et al.

FOOD CHEMISTRY (2008)

Add to Collection

© Peeref 2019-2024. All rights reserved.