☆ 4.6 Article

Two-Dimensional (PEA)(2)PbBr4 Perovskites Sensors for Highly Sensitive Ethanol Vapor Detection

SENSORS (2022)

Related references

Note: Only part of the references are listed.

Article Chemistry, Physical

Fabrication and investigation of a new all-inorganic lead free perovskite Cs3Bi2I6 Br3 for ammonia detection at room temperature

Wanli Jiao et al.

Summary: A new all-inorganic Cs3Bi2I6Br3 perovskite synthesized by a liquid spin-coating method shows high responses to ammonia at room temperature, with good recovery process and stability. This new material offers a potential green gas sensor design strategy for room temperature detection.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Add to Collection

Article Biochemistry & Molecular Biology

Gas Sensors Based on Porous Ceramic Bodies of MSnO3 Perovskites (M = Ba, Ca, Zn): Formation and Sensing Properties towards Ethanol, Acetone, and Toluene Vapours

Yasser H. Ochoa-Munoz et al.

Summary: In this study, the gas-sensing properties of porous ceramic bodies formed by slip casting technique were investigated using perovskite nanoparticles. The results showed that ZnSnO3 sensors exhibited high sensitivity and repeatability, as well as good selectivity and stability towards acetone.

MOLECULES (2022)

Add to Collection

Article Chemistry, Analytical

Hierarchically structured LaFeO3 with hollow core and porous shell as efficient sensing material for ethanol detection

Thi To Nga Phan et al.

Summary: The hollow LaFeO3 sensor synthesized by a hydrothermal method with cetyl-trimethylammonium bromide exhibited enhanced sensing performance towards ethanol gas, showing potential for future practical use in trace ethanol detection.

SENSORS AND ACTUATORS B-CHEMICAL (2022)

Add to Collection

Article Chemistry, Analytical

Amplifying the receptor function on Ba0.9La0.1FeO3-SnO2 composite particle surface for high sensitivity toward ethanol gas sensing

Koichi Suematsu et al.

Summary: Composite particles of Ba0.9La0.1FeO3 (BLF) and SnO2 were designed to enhance the sensitivity of a semiconductor gas sensor towards volatile organic compounds. By operating the sensor in a double-pulse mode, BLF acted as a supplier of oxygen and ethanol, leading to a significantly amplified sensor response.

SENSORS AND ACTUATORS B-CHEMICAL (2022)

Add to Collection

Article Polymer Science

Effect of Stability of Two-Dimensional (2D) Aminoethyl Methacrylate Perovskite Using Lead-Based Materials for Ammonia Gas Sensor Application

Muhamad Yuzaini Azrai Mat Yunin et al.

Summary: The physical properties of iodide and nitrate-based lead perovskite materials were studied, with the iodide-based material showing instability and significant changes, while the nitrate-based material demonstrated superior stability and crystallinity. The nitrate-based material exhibited good resistance to ammonia gas, indicating potential for stable and less toxic 2D perovskite materials.

POLYMERS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Ag-Modified Porous Perovskite-Type LaFeO3 for Efficient Ethanol Detection

Jiejie Yu et al.

Summary: In this study, Ag in situ modified porous LaFeO3 nanosheets were synthesized for ethanol detection. The nanosheets exhibited fast response/recovery times and high selectivity, attributed to their unique crystal structure and physical-chemical properties.

NANOMATERIALS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Mixed-dimensional organic-inorganic metal halide perovskite (OIMHP) based gas sensors with superior stability for NO2 detection

The Duong et al.

Summary: The study demonstrates that dimensional engineering of organic-inorganic metal halide perovskite (OIMHP) materials can significantly improve the performance and ambient stability of gas sensors, showing excellent sensitivity and selectivity for detecting NO2 gas.

MATERIALS ADVANCES (2022)

Add to Collection

Article Engineering, Environmental

Exploring CsPbI3-FAI alloys: Introducing low-dimensional Cs2FAPb2I7 absorber for efficient and stable perovskite solar cells

Lyubov A. Frolova et al.

Summary: A new family of promising 2D absorber materials has been reported by alloying CsPbI3 with FAI, showing improved stability and light power conversion efficiency. The optimal CsPbI3-FAI material formulations demonstrate high phase stability and efficiency in perovskite solar cells, setting new records for Cs-rich low dimensional perovskite-like absorber materials and paving the way for the development of a new generation of efficient and stable perovskite solar cells.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of heterostructure engineering on electronic structure and transport properties of two-dimensional halide perovskites

Rahul Singh et al.

Summary: Organic-inorganic halide perovskite solar cells have low-cost fabrication, flexibility, and high power conversion efficiency. Reducing their dimensionality from three- to two-dimensional provides an exciting opportunity to tune their electronic properties, while heterostructure engineering significantly enhances the energy stability and transport properties of the perovskites. The 2D heterostructured material shows potential for nano-optoelectronic devices and effective photovoltaics.

COMPUTATIONAL MATERIALS SCIENCE (2021)

Add to Collection

Article Chemistry, Physical

Effect of noble metal elements on ethanol sensing properties of ZnSnO3 nanocubes

Yaoyu Yin et al.

Summary: Noble metal-doped ZnSnO3 nanocubes were prepared via a one-step hydrothermal route and their ethanol sensing properties were investigated. The Ag-ZnSnO3 nanocubes showed the highest response to ethanol gas with great potential for practical applications.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Understanding the Synergistic Effect of Device Architecture Design toward Efficient Perovskite Light-Emitting Diodes Using Interfacial Layer Engineering

Eojin Yoon et al.

Summary: This paper summarizes the research status of metal halide perovskite light-emitting diodes, focusing on strategies to improve efficiency through adjusting device architecture and improving crystal quality, as well as discussing the synergistic effects between different strategies at each layer in devices. Perspectives on future research on PeLEDs with a focus on their architecture are also provided.

ADVANCED MATERIALS INTERFACES (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Anti-solvent engineering via potassium bromide additive for highly efficient and stable perovskite solar cells

Sadeer M. Majeed et al.

Summary: The study demonstrates the use of KBr additive in CB anti-solvent engineering to enhance perovskite quality in triple-cation perovskite solar cells, leading to improved crystallinity, passivation of surface defects, suppressed nonradiative recombination, and facilitated charge extraction. Additionally, the hysteresis behavior in the perovskite layer was suppressed due to halide vacancies filling with K+ ions.

ORGANIC ELECTRONICS (2021)

Add to Collection

Article Chemistry, Physical

A review on two-dimensional (2D) and 2D-3D multidimensional perovskite solar cells: Perovskites structures, stability, and photovoltaic performances

Eun-Bi Kim et al.

JOURNAL OF PHOTOCHEMISTRY AND PHOTOBIOLOGY C-PHOTOCHEMISTRY REVIEWS (2021)

Add to Collection

Review Electrochemistry

Review-Recent Material Advances and Their Mechanistic Approaches for Room Temperature Chemiresistive Gas Sensors

Bapathi Kumaar Swamy Reddy et al.

Summary: Gas sensors play an important role in industrial and domestic sectors due to increased emissions. The most popular commercial gas sensors in the market are the metal oxide-semiconducting (MOS) chemiresistive gas sensors. However, there is a growing demand for gas sensors with high sensitivity and selectivity at room temperature.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Universal sensing of ammonia gas by family of lead halide perovskites based on paper sensors: Experiment and molecular dynamics

Avisek Maity et al.

Summary: This paper demonstrates the fabrication of high sensitivity and high selectivity room temperature ammonia gas sensors using lead halide perovskites. These sensors can sensitively detect NH3 gas through simple color and resistance changes, and operate below ppm levels with low power consumption.

MATERIALS RESEARCH BULLETIN (2021)

Add to Collection

Editorial Material Chemistry, Physical

Development of perovskite solar cells with >25% conversion efficiency

Gi-Hwan Kim et al.

Summary: Improving carrier management with electron transfer and the perovskite layer is crucial for achieving high-efficiency perovskite solar cells, as discussed in the study published in the February 25, 2021 issue of Nature by Seo et al.

JOULE (2021)

Add to Collection

Article Chemistry, Physical

Modified colored semi-transparent perovskite solar cells with enhanced stability

Jitprabhat Ponchai et al.

Summary: The study focused on investigating the effects of additives on the structure and stability of perovskite solar cells, revealing significant impacts of additives on morphology and crystallinity, directly correlating to the development of optoelectronic properties. FABr-doped perovskites exhibited good power conversion efficiency and stability for semitransparent solar cells, showing potential for perovskite solar window applications.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Chemistry, Physical

Ultra-thin and high transparent Cu2ZnSnSe4/NiOx double-layered inorganic hole-transporting layer for inverted structure CH3NH3PbI3 perovskite solar cells

Ching-Ho Tien et al.

Summary: In this study, a low-cost, highly transparent, and ultra-thin Cu2ZnSnSe4 (CZTSe) combined with NiOx film double-layered inorganic hole transporting layer (HTL) was presented for inverted CH3NH3PbI3 perovskite solar cells, aiming to enhance hole extraction and suppress electron transport. The double-layer HTL showed significant improvements in open-circuit voltage, short-circuit current density, fill factor, and power conversion efficiency of the solar cell, while also enhancing the stability of the device.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Ultra-sensitive Ag-LaFeO3 for selective detection of ethanol

Fei Li et al.

Summary: Ag-LaFeO3, prepared by chemical reduction method, demonstrates excellent gas-sensing properties towards ethanol, with a higher gas response compared to LaFeO3 sensor, and short response and recovery times.

JOURNAL OF MATERIALS SCIENCE (2021)

Add to Collection

Article Engineering, Electrical & Electronic

All-Evaporated, All-Inorganic CsPbI3 Perovskite-Based Devices for Broad-Band Photodetector and Solar Cell Applications

Maria Isabel Pintor Monroy et al.

Summary: This study focuses on the deposition of CsPbI3 by CsI and PbI2 co-evaporation to fabricate all-inorganic, all-evaporated devices, using NiO and TiO2 as transport layers, and evaluates their performance for both photodetector and solar cell applications. The results show that these devices exhibit low leakage current, high external quantum efficiency, detectivity, and fast response times as photodetectors, while achieving acceptable efficiencies as solar cells.

ACS APPLIED ELECTRONIC MATERIALS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Highly sensitive and selective ammonia gas sensor based on FAPbCl3 lead halide perovskites

Aleksei A. Parfenov et al.

Summary: Organic-inorganic hybrid halide perovskites have unique optoelectronic properties for use in semiconducting photoelectronic devices; Perovskites as sensor materials for gas detection are gaining interest; Gas sensor based on formamidinium lead chloride exhibits high selectivity response towards ammonia due to a lock-and-key mechanism.

JOURNAL OF MATERIALS CHEMISTRY C (2021)

Add to Collection

Review Materials Science, Multidisciplinary

Two-dimensional halide perovskite single crystals: principles and promises

Nishi Parikh et al.

Summary: Two-dimensional (2D) metal halide perovskites have gained significant attention in recent years as the next-generation materials with higher stability, structural diversity, and excellent photophysical properties. Despite still being in the development stage, they show great potential for future device applications.

EMERGENT MATERIALS (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Sensitive Cross-Linked SnO2:NiO Networks for MEMS Compatible Ethanol Gas Sensors

Weiguang Tong et al.

NANOSCALE RESEARCH LETTERS (2020)

Add to Collection

Article Chemistry, Analytical

Synthesis and high ammonia gas sensitivity of (CH3NH3)PbBr3-xIx perovskite thin film at room temperature

Wanli Jiao et al.

SENSORS AND ACTUATORS B-CHEMICAL (2020)

Add to Collection

Review Engineering, Electrical & Electronic

Focus on performance of perovskite light-emitting diodes

Peipei Du et al.

FRONTIERS OF OPTOELECTRONICS (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Room-temperature NO2 sensor based on a hybrid nanomaterial of methylammonium tin iodide submicron spheres and tin dioxide nanowires

Vu Xuan Hien et al.

SCRIPTA MATERIALIA (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Giant Humidity Effect on Hybrid Halide Perovskite Microstripes: Reversibility and Sensing Mechanism

Md Azimul Haque et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection

Article Chemistry, Physical

Thermochemical Stability of Hybrid Halide Perovskites

Alessandro Senocrate et al.

ACS ENERGY LETTERS (2019)

Add to Collection

Article Chemistry, Physical

Phenethylammonium bismuth halides: from single crystals to bulky-organic cation promoted thin-film deposition for potential optoelectronic applications

Mehri Ghasemi et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Add to Collection

Review Chemistry, Multidisciplinary

Prospects and Challenges of Volatile Organic Compound Sensors in Human Healthcare

Ahmed H. Jalal et al.

ACS SENSORS (2018)

Add to Collection

Review Materials Science, Multidisciplinary

Metal halide perovskites: stability and sensing-ability

Zhaohua Zhu et al.

JOURNAL OF MATERIALS CHEMISTRY C (2018)

Add to Collection

Article Multidisciplinary Sciences

Layer-edge device of two-dimensional hybrid perovskites

Bin Cheng et al.

NATURE COMMUNICATIONS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Influence of Radiation on the Properties and the Stability of Hybrid Perovskites

Felix Lang et al.

ADVANCED MATERIALS (2018)

Add to Collection

Article Physics, Condensed Matter

Conductivity of CH3NH3PbI3 thin film perovskite stored in ambient atmosphere

Bizuneh Gebremichael et al.

PHYSICA B-CONDENSED MATTER (2017)

Add to Collection

Article Chemistry, Analytical

Enhanced ethanol sensing of Ni-doped SnO2 hollow spheres synthesized by a one-pot hydrothermal method

Zhou Li et al.

SENSORS AND ACTUATORS B-CHEMICAL (2017)

Add to Collection

Article Multidisciplinary Sciences

Green Perovskite Distributed Feedback Lasers

J. R. Harwell et al.

SCIENTIFIC REPORTS (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Reversible, Fast, and Wide-Range Oxygen Sensor Based on Nanostructured Organometal Halide Perovskite

Marc-Antoine Stoeckel et al.

ADVANCED MATERIALS (2017)

Add to Collection

Review Engineering, Biomedical

Significance of Exhaled Breath Test in Clinical Diagnosis: A Special Focus on the Detection of Diabetes Mellitus

Souvik Das et al.

JOURNAL OF MEDICAL AND BIOLOGICAL ENGINEERING (2016)

Add to Collection

Article Chemistry, Multidisciplinary

A resistance change effect in perovskite CH3NH3PbI3 films induced by ammonia

Chunxiong Bao et al.

CHEMICAL COMMUNICATIONS (2015)

Add to Collection

© Peeref 2019-2024. All rights reserved.