Related references
Note: Only part of the references are listed.The intergranular oxidation behavior of low-angle grain boundary of alloy 600 in simulated pressurized water reactor primary water
Xingyu Feng et al.
ACTA MATERIALIA (2022)
Comparison of the corrosion of materials in supercritical carbon dioxide, air, and argon environments
L. Teeter et al.
CORROSION SCIENCE (2021)
Creep of MARBN-type 9Cr martensitic steel in gaseous CO2 environment
K. A. Rozman et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
The environmental degradation behavior of FeNiMnCr high entropy alloy in high temperature hydrogenated water
Jiuyang Dong et al.
SCRIPTA MATERIALIA (2021)
A novel approach to index site-specific grain boundary plane
Xingyu Feng et al.
MATERIALS CHARACTERIZATION (2021)
Effect of Specimen Thickness on the Degradation of Mechanical Properties of Ferritic-Martensitic P91 Steel by Direct-fired Supercritical CO2 Power Cycle Environment
Sajedur R. Akanda et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2021)
A high-resolution characterization of the initiation of stress corrosion crack in Alloy 690 in simulated pressurized water reactor primary water
Wenjun Kuang et al.
CORROSION SCIENCE (2020)
The effect of grain boundary structure on the intergranular degradation behavior of solution annealed alloy 690 in high temperature, hydrogenated water
Wenjun Kuang et al.
ACTA MATERIALIA (2020)
Correlation between Grain Boundary Migration and Stress Corrosion Cracking of Alloy 600 in Hydrogenated Steam
L. Volpe et al.
ACTA MATERIALIA (2020)
Oxidation behaviour of solution-annealed and thermally-treated Alloy 690 in low pressure H2-Steam
L. Volpe et al.
CORROSION SCIENCE (2020)
Carburization resistance of cu-coated stainless steel in supercritical carbon dioxide environments
Andrew Meyer Brittan et al.
CORROSION SCIENCE (2020)
Carbon depositions within the oxide scale and its effect on the oxidation behavior of low alloy steel in low (0.1 MPa), sub-(5 MPa) and supercritical (10 MPa) CO2 at 550°C
Mohammad Hassan Shirani Bidabadi et al.
CORROSION SCIENCE (2020)
A novel test technique for the mechanistic study of initiation of environmentally assisted cracking on a Ni-30Cr-10Fe alloy in simulated pressurized water reactor primary water
Wenjun Kuang et al.
SCRIPTA MATERIALIA (2020)
Corrosion behaviors of four stainless steels with similar chromium content in supercritical carbon dioxide environment at 650 °C
Hongsheng Chen et al.
CORROSION SCIENCE (2019)
High temperature oxidation of Ni alloys in CO2 containing impurities
Richard P. Oleksak et al.
CORROSION SCIENCE (2019)
Corrosion performance of heat-resisting steels and alloys in supercritical carbon dioxide at 650 °C and 15 MPa
Zhiyuan Liang et al.
ENERGY (2019)
General corrosion and stress corrosion cracking of Alloy 600 in light water reactor primary coolants
Peter M. Scott et al.
JOURNAL OF NUCLEAR MATERIALS (2019)
Effect of Fe on corrosion of Ni-20Cr and Ni-30Cr alloys in wet CO2 gas at 650 and 700 °C
Yun Xie et al.
CORROSION SCIENCE (2019)
Effect of Surface Finish on High-Temperature Oxidation of Steels in CO2, Supercritical CO2, and Air
Richard P. Oleksak et al.
OXIDATION OF METALS (2019)
Insights into the stress corrosion cracking of solution annealed alloy 690 in simulated pressurized water reactor primary water under dynamic straining
Wenjun Kuang et al.
ACTA MATERIALIA (2018)
Correlating the five parameter grain boundary character distribution and the intergranular corrosion behaviour of a stainless steel using 3D orientation microscopy based on mechanical polishing serial sectioning
D. An et al.
ACTA MATERIALIA (2018)
Effects of Si, Al and Ti on corrosion of Ni-20Cr and Ni-30Cr alloys in Ar-20CO(2) at 700 degrees C
Thuan Dinh Nguyen et al.
CORROSION SCIENCE (2018)
Stress corrosion crack initiation in Alloy 690 in high temperature water
Tyler Moss et al.
CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE (2018)
Temperature Effect on Oxidation Behavior of Ni-Cr Alloys in CO2 Gas Atmosphere
Yun Xie et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)
Corrosion of 9-12Cr ferritic-martensitic steels in high-temperature CO2
F. Rouillard et al.
CORROSION SCIENCE (2016)
Micro-mechanical measurement of fracture behaviour of individual grain boundaries in Ni alloy 600 exposed to a pressurized water reactor environment
Alisa Stratulat et al.
CORROSION SCIENCE (2016)
Corrosion and carburization behavior of chromia-forming heat resistant alloys in a high-temperature supercritical-carbon dioxide environment
Ho Jung Lee et al.
CORROSION SCIENCE (2015)
Initial Assessment of Ni-Base Alloy Performance in 0.1 MPa and Supercritical CO2
B. A. Pint et al.
JOM (2015)
REVIEW OF SUPERCRITICAL CO2 POWER CYCLE TECHNOLOGY AND CURRENT STATUS OF RESEARCH AND DEVELOPMENT
Yoonhan Ahn et al.
NUCLEAR ENGINEERING AND TECHNOLOGY (2015)
Penetration of protective chromia scales by carbon
David J. Young et al.
SCRIPTA MATERIALIA (2014)
How oxidized grain boundaries fail
Helen Dugdale et al.
ACTA MATERIALIA (2013)
Corrosion of a stainless steel and nickel-based alloys in high temperature supercritical carbon dioxide environment
V. Firouzdor et al.
CORROSION SCIENCE (2013)
Corrosion of austenitic alloys in high temperature supercritical carbon dioxide
G. Cao et al.
CORROSION SCIENCE (2012)
Carburisation of ferritic Fe-Cr alloys by low carbon activity gases
Thomas Gheno et al.
CORROSION SCIENCE (2011)
Corrosion of austenitic and ferritic-martensitic steels exposed to supercritical carbon dioxide
L. Tan et al.
CORROSION SCIENCE (2011)
Compatibility of FBR structural materials with supercritical carbon dioxide
T. Furukawa et al.
PROGRESS IN NUCLEAR ENERGY (2011)
Share Paper
