4.7 Article

Pathways resilient future for developing a sustainable E85 fuel and prospects towards its applications

Related references

Note: Only part of the references are listed.
Article Environmental Sciences

Uniqueness technique for introducing high octane environmental gasoline using renewable oxygenates and its formulation on Fuzzy modeling

Tamer M. M. Abdellatief et al.

Summary: This study proposes a new approach to examine the impact of renewable fuel additives through fuzzy modeling, showing that using low carbon oxygenates can enhance the quality and quantity of heavy hydrocracked naphtha, potentially contributing to the production of high quality environmentally friendly gasoline.

SCIENCE OF THE TOTAL ENVIRONMENT (2022)

Article Energy & Fuels

An evolving research agenda of merit function calculations for new gasoline compositions

Mikhail A. Ershov et al.

Summary: This study focuses on developing new gasoline formulations and establishing a mathematical model to evaluate their performance and emissions under different conditions. The experimental results show that the new formulations outperform the baseline gasoline slightly.
Article Energy & Fuels

Waste-to-bioethanol supply chain network: A deterministic model

Oseok Kwon et al.

Summary: The article introduces a new technology for producing bioethanol from organic waste, and proposes an optimization model to determine the optimal location of bioethanol refineries in order to reduce costs. The validity of the model was demonstrated through a case study on South Korea in 2030.

APPLIED ENERGY (2021)

Article Energy & Fuels

Creation a novel promising technique for producing an unleaded aviation gasoline 100UL

Mikhail A. Ershov et al.

Summary: This study investigates the influence of aromatic amines, aromatic hydrocarbons, and MTBE on the antiknock characteristics of model blends to create a novel technique for producing unleaded aviation gasoline. The results indicate that the optimal fuel composition contains isooctane, isopentane, toluene, isopropylbenzene, MTBE, m-toluidine, and isopropyl alcohol, with characteristics close to commercial aviation gasoline. Furthermore, the non-hydrocarbon additives concentrations tested in this study have been used on an industrial scale in various countries.
Review Energy & Fuels

A review of controlling strategies of the ignition timing and combustion phase in homogeneous charge compression ignition (HCCI) engine

Xiongbo Duan et al.

Summary: The HCCI engine presents superior fuel economy and emissions compared to traditional combustion engines, but lacks direct control over auto-ignition timing. Effective techniques and controlling strategies, such as fuel management and exhaust gas recirculation, are used to optimize combustion and expand operation range.
Article Chemistry, Applied

A new approach for producing mid-ethanol fuels E30 based on low-octane hydrocarbon surrogate blends

Mikhail A. Ershov et al.

Summary: The development of E30 fuel with an ethyl alcohol content of 20-40% has great potential for automotive technology without modifications. By blending bioethanol with low-octane hydrocarbon fractions, the antiknock performance can be significantly improved, offering promising economic parameters for fuel production.

FUEL PROCESSING TECHNOLOGY (2021)

Article Thermodynamics

Diesel-oxygenated fuels ternary blends with nano additives in compression ignition engine: A step towards cleaner combustion and green environment

Ahmed El-Seesy et al.

Summary: This research aims to enhance the utilization of Jatropha biodiesel in a CI engine by using higher alcohols and graphene oxide nano-additives. The results show that higher alcohols and GO can facilitate increasing the Jatropha biodiesel fraction in the mixture with appropriate diesel engine performance enhancement.

CASE STUDIES IN THERMAL ENGINEERING (2021)

Article Energy & Fuels

MODELLING INDUSTRIAL CATALYTIC REFORMING OF LOWOCTANE GASOLINE

D. A. Petrova et al.

Summary: Naphtha reforming is a crucial industrial process in refineries, producing aromatic hydrocarbons for gasoline additives. A mathematical model has been proposed to develop a new method for naphtha reforming, based on kinetic equations and industrial-scale conditions, validated by comparing results with industrial data.

CHEMISTRY AND TECHNOLOGY OF FUELS AND OILS (2021)

Review Energy & Fuels

Recent trends for introducing promising fuel components to enhance the anti-knock quality of gasoline: A systematic review

Tamer M. M. Abdellatief et al.

Summary: Engineers and researchers aim to develop environmentally friendly high-octane gasoline by incorporating organic components to improve low-octane hydrocarbons, addressing global energy and environmental challenges.
Article Energy & Fuels

Experimental study the impacts of the key operating and design parameters on the cycle-to-cycle variations of the natural gas SI engine

Xiongbo Duan et al.

Summary: This study investigated the impacts of key operating and design parameters on the cycle-to-cycle variations in a high compression ratio SI natural gas engine under lean mixture conditions. The results showed that with increasing engine speed, there were fewer incomplete combustion cycles and the in-cylinder pressure distribution became more concentrated. Increasing load led to more concentrated pressure distribution and peak combustion pressure. Additionally, the relationship between peak combustion pressure and load was nearly linear, but increasing load caused the in-cylinder pressure traces to disperse slightly. Under low-load conditions, increasing compression ratio led to more concentrated pressure traces and fewer incomplete combustion cycles, while the effects were slight under high-load conditions.
Article Thermodynamics

An optical study on spray and combustion characteristics of ternary hydrogenated catalytic biodiesel/methanol/n-octanol blends; part n: Liquid length and in-flame soot

Tiemin Xuan et al.

Summary: The study investigates the spray and flame characteristics of methanol and HCB blended fuels, showing an increase in liquid length with higher methanol content and a decrease in in-flame soot production with additional methanol due to leaner fuel combustion and higher oxygen content within the blends.

ENERGY (2021)

Article Thermodynamics

Influence of quaternary combinations of biodiesel/methanol/n-octanol/diethyl ether from waste cooking oil on combustion, emission, and stability aspects of a diesel engine

Ahmed EL-Seesy et al.

Summary: Methanol is considered a promising renewable fuel for diesel engines, but faces challenges due to phase separation, low cetane number, and high latent heat of vaporization. This study aimed to improve methanol's usability in diesel engines by using n-octanol and diethyl ether as cosolvents and ignition improvers. The addition of n-octanol improved solubility, but the blends showed lower cylinder pressure and thermal efficiency compared to waste cooking oil biodiesel alone. Engine emissions of nitrogen oxide levels decreased with the blends, but carbon monoxide and smoke opacity increased.

ENERGY CONVERSION AND MANAGEMENT (2021)

Article Energy & Fuels

Effects of the continuous variable valve lift system and Miller cycle strategy on the performance behavior of the lean-burn natural gas spark ignition engine

Jinfei Wang et al.

Summary: The study found that the continuous variable valve lift system can reduce pumping loss, slightly increase volumetric efficiency, and accelerate combustion rate and improve combustion efficiency. Under the Miller cycle strategy, late intake valve close can reduce peak in-cylinder pressure and peak combustion temperature, thereby reducing NOx emissions and mitigating knocking combustion.
Article Engineering, Multidisciplinary

Non-premixed reactive volatilization reactor for catalytic reforming of ethanol and E85

Ying Lin et al.

Summary: The study demonstrates that the non-premixed configuration is a viable option for compact reforming at high molar carbon to oxygen ratio while avoiding soot formation.

RESULTS IN ENGINEERING (2021)

Article Energy & Fuels

Blending Characteristics of Isooctene, MTBE, and TAME as Gasoline Components

M. A. Ershov et al.

ENERGY & FUELS (2020)

Article Energy & Fuels

Improving the Efficiency of the Gas Fractionation Unit of a Gasoline Stabilization Installation

S. M. Ledenev et al.

CHEMISTRY AND TECHNOLOGY OF FUELS AND OILS (2020)

Article Energy & Fuels

Characteristics of Isohexene as a Novel Promising High-Octane Gasoline Booster

Mikhail A. Ershov et al.

ENERGY & FUELS (2020)

Article Energy & Fuels

Possible Components for Increasing the Resources of Automobile Gasolines

E. A. Chernysheva et al.

CHEMISTRY AND TECHNOLOGY OF FUELS AND OILS (2020)

Article Energy & Fuels

A fuzzy logic map-based knock control for spark ignition engines

Benjamin Pla et al.

APPLIED ENERGY (2020)

Article Energy & Fuels

Furfural Derivatives as Fuel Components

P. A. Nikul'shin et al.

CHEMISTRY AND TECHNOLOGY OF FUELS AND OILS (2020)

Article Engineering, Chemical

Green Approach for Biodiesel Production from Jojoba Oil Supported by Process Modeling and Simulation

Wael Abdelmoez et al.

INTERNATIONAL JOURNAL OF CHEMICAL REACTOR ENGINEERING (2016)

Review Green & Sustainable Science & Technology

Prospects of bioethanol fuels E30 and E85 application in Russia and technical requirements for their quality

M. A. Ershov et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2016)

Article Engineering, Chemical

Green Approach for Biodiesel Production from Jojoba Oil Supported by Process Modeling and Simulation

Wael Abdelmoez et al.

INTERNATIONAL JOURNAL OF CHEMICAL REACTOR ENGINEERING (2016)

Review Chemistry, Applied

Oleochemical Industry Future through Biotechnology

Wael Abdelmoez et al.

JOURNAL OF OLEO SCIENCE (2014)

Article Energy & Fuels

Improving the environmental and performance properties of automotive gasolines. Detergent additives

S. A. Karpov

CHEMISTRY AND TECHNOLOGY OF FUELS AND OILS (2007)

Article Energy & Fuels

Detergent additives to automotive gasolines

EA Nikitina et al.

CHEMISTRY AND TECHNOLOGY OF FUELS AND OILS (2006)