☆ 4.2 Article

Effect of Cu-Al2O3 nanoparticles on the performance of chlorinated polyethylene nanocomposites

PROGRESS IN RUBBER PLASTICS AND RECYCLING TECHNOLOGY (2023)

Related references

Note: Only part of the references are listed.

Article Materials Science, Composites

Insights into structural, thermal, electrical and mechanical properties of copper alumina reinforced chlorinated natural rubber nanocomposites

K. Parvathi et al.

Summary: This research aimed to fabricate low-cost and highly durable conducting rubber products by incorporating copper alumina nanocomposites into chlorinated natural rubber. The results showed that the addition of nanoparticles significantly improved the electrical conductivity and hardness, while reducing the elongation at break and resilience. These improvements are important for the design of flexible flame retardant electronic devices, electromagnetic induction shielding, and conducting adhesive materials.

JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2023)

Add to Collection

Article Chemistry, Inorganic & Nuclear

Synthesis, characterization, dielectric properties and gas sensing application of polythiophene/chitosan nanocomposites

K. Amruth et al.

Summary: This paper investigates the polymerization of thiophene monomer in the presence of chitosan nano-powders and analyzes the formation and properties of polythiophene/chitosan nanocomposites. The study confirms the chemical interaction between polythiophene and chitosan nano-powders, as well as the uniform positioning of chitosan in polythiophene. The nanocomposites exhibit improved electrical conductivity and gas sensing performance.

INORGANIC CHEMISTRY COMMUNICATIONS (2022)

Add to Collection

Article Polymer Science

Enhanced optical, thermal and electrical properties of chlorinated natural rubber/zinc ferrite nanocomposites for flexible electrochemical devices

K. Parvathi et al.

Summary: This work investigates the optical, thermal stability, and temperature-dependent electrical properties of chlorinated natural rubber/zinc ferrite nanocomposites. The insertion of zinc ferrite into the rubber matrix leads to a decrease in bandgap energy. The nanocomposites exhibit enhanced thermal stability and electrical properties compared to the parent polymer. Additionally, the conductivity of the nanocomposites shows a non-ohmic behavior, indicating a dynamic relaxation process. The experimental results are in good agreement with theoretical models, suggesting the presence of interfacial interactions in the nanocomposites. These findings are significant for the development of highly-durable flexible electronic devices, actuators, supercapacitors, and elastomeric pressure sensors.

JOURNAL OF MACROMOLECULAR SCIENCE PART A-PURE AND APPLIED CHEMISTRY (2022)

Add to Collection

Article Materials Science, Composites

Compliant materials based on nickel oxide/chlorinated natural rubber nanocomposites

K. Parvathi et al.

Summary: This research article focuses on the preparation of chlorinated natural rubber (Cl-NR)/nickel oxide (NiO) nanocomposites using a simple and environmentally friendly two-roll mill mixing technique. The study demonstrates that increasing the nanofiller content improves the crystallinity, dispersion, glass transition temperature, and mechanical properties of the nanocomposites. In addition, the nanocomposites show higher AC conductivity, dielectric loss, and dielectric constant compared to pure Cl-NR. The incorporation of the nanofiller also reduces the cure time, making the fabrication of rubber products more cost-effective. The study suggests that the nanocomposites with 5 phr NiO loading exhibit the best mechanical and electrical properties and can be used for the fabrication of electromagnetic induction shielding materials, conducting adhesives, and flame-resistant flexible electronic devices.

POLYMER COMPOSITES (2022)

Add to Collection

Article Engineering, Chemical

Synthesis, characterization, conductivity, and gas-sensing performance of copolymer nanocomposites based on copper alumina and poly(aniline-co-pyrrole)

S. Sankar et al.

Summary: A series of copolymer nanocomposites based on poly(aniline-co-pyrrole) with different contents of copper alumina nanoparticles were synthesized and characterized. The presence and dispersion of nanoparticles in the copolymer matrix were confirmed, and the flexibility of the polymer was reduced with an increase in glass transition temperature. The nanocomposites exhibited increased hopping of charge carriers and excellent gas sensing properties. These nanocomposites have the potential for developing nano-electronic devices.

POLYMER ENGINEERING AND SCIENCE (2022)

Add to Collection

Article Materials Science, Composites

Comparative evaluation of oil resistance, dielectric properties, AC conductivity, and transport properties of nitrile rubber and chlorinated nitrile rubber

A. Nihmath et al.

Summary: The study investigated the molecular transport of petroleum fuels and oil through chlorinated NBR and its effect on AC conductivity and dielectric properties. Results showed that CI-NBR exhibited higher oil resistance and electrical conductivity compared to pure NBR.

PROGRESS IN RUBBER PLASTICS AND RECYCLING TECHNOLOGY (2021)

Add to Collection

Article Polymer Science

Flexible polyurethane foams reinforced with organic and inorganic nanofillers

Shokoofeh Ghasemi et al.

Summary: The study found that smaller loading levels generally resulted in better performance of the foams. Compared to inorganic nanofillers, cellulose nanofillers showed better improvement in the tensile modulus and compressive modulus of the foams.

JOURNAL OF APPLIED POLYMER SCIENCE (2021)

Add to Collection

Article Engineering, Multidisciplinary

Prediction of mechanical properties of graphite nanoflake/ polydimethylsiloxane nanocomposites as affected by processing method

Seulki Ha et al.

Summary: This study investigates the impact of manufacturing processes on porosity and mechanical properties of nanocomposites. It is found that the evolution of porosity is best modeled with the logistic function, and prediction models for mechanical properties are established based on this. The proposed models are in good agreement with experimental data.

COMPOSITES PART B-ENGINEERING (2021)

Add to Collection

Article Polymer Science

Cellulose nanocrystal-mediated assembly of graphene oxide in natural rubber nanocomposites with high electrical conductivity

Ge Zhu et al.

Summary: A green and powerful strategy for preparing CNC/GO/NR nanocomposites with a 3D hierarchical conductive network was reported. The CNC/GO nanohybrids, with enhanced stability due to hydrogen bonding interactions, significantly improved electrical conductivity and mechanical properties of the nanocomposites. The nanocomposite with 4 wt% GO and 5 wt% CNC exhibited a nine orders of magnitude increase in electrical conductivity compared to the nanocomposite with only 4 wt% GO.

JOURNAL OF APPLIED POLYMER SCIENCE (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Structural and morphological studies, and temperature/frequency dependence of electrical conductivity of Ba0.97La0.02Ti1-xNb4x/5O3 perovskite ceramics

M. Jebli et al.

Summary: The electrical behavior of BaLT1-xNb4x/5 ceramics was studied, revealing an increase in conductivity with higher Nb content, frequency dependence in accordance with the Jonscher power law, and the suitability of barrier hopping and polaron tunneling models to explain conduction mechanisms. Additionally, increasing temperature led to an increase in DC conductivity, confirming the semiconducting nature of the materials.

RSC ADVANCES (2021)

Add to Collection

Article Polymer Science

Characterization, conductivity studies, dielectric properties, and gas sensing performance of in situ polymerized polyindole/copper alumina nanocomposites

S. Sankar et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2020)

Add to Collection

Article Materials Science, Composites

Enhancement in thermal, mechanical and electrical properties of novel PVA nanocomposite embedded with SrO nanofillers and the analysis of its thermal degradation behavior by nonisothermal approach

Selvi Jayaraj et al.

POLYMER COMPOSITES (2020)

Add to Collection

Review Materials Science, Composites

Current options for characterizing, sorting, and recycling polymeric waste

Daniel Jose da Silva et al.

PROGRESS IN RUBBER PLASTICS AND RECYCLING TECHNOLOGY (2020)

Add to Collection

Article Materials Science, Composites

Dynamically vulcanized high-density polyethylene/nitrile butadiene rubber blends compatibilized by chlorinated polyethylene

Lin Zhang et al.

JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2019)

Add to Collection

Article Materials Science, Composites

Polybutadiene rubber/exfoliated graphite nanocomposites: Impact of filler on the thermal, mechanical and permeability characteristics

Soney C. George et al.

PROGRESS IN RUBBER PLASTICS AND RECYCLING TECHNOLOGY (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of particle size distribution on thermo-mechanical properties of NiO filled LDPE composites

D. Tripathi et al.

BULLETIN OF MATERIALS SCIENCE (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Frequency and temperature-dependence of dielectric permittivity and electric modulus studies of the solid solution Ca0.85Er0.1Ti1-xCo4x/3O3 (0 <= x <= 0.1)

Ch Rayssi et al.

RSC ADVANCES (2018)

Add to Collection

Article Polymer Science

Preparation, characterization, dielectric properties and solvent-imbibing behavior of styrene-butadiene rubber/zinc sulfide nanocomposites

V. C. Jasna et al.

INTERNATIONAL JOURNAL OF PLASTICS TECHNOLOGY (2018)

Add to Collection

Article Physics, Condensed Matter

A study of frequency dependent electrical and dielectric properties of NiO nanoparticles

V. Usha et al.

PHYSICA B-CONDENSED MATTER (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of Zn(NO3)2 filler on the dielectric permittivity and electrical modulus of PMMA

P. Maji et al.

BULLETIN OF MATERIALS SCIENCE (2015)

Add to Collection

Article Nanoscience & Nanotechnology

Microstructure and properties of hot extruded Cu-1 wt% Al2O3 nano-composites synthesized by various techniques

S. B. Chandrasekhar et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)

Add to Collection

Article Engineering, Chemical

High-density polyethylene nanocomposites using masterbatches of chlorinated polyethylene/graphene oxide

A. U. Chaudhry et al.

POLYMER ENGINEERING AND SCIENCE (2013)

Add to Collection

Article Chemistry, Multidisciplinary

Synthesis, characterization and evaluation of copper based nanoparticles as agrochemicals against Phytophthora infestans

K. Giannousi et al.

RSC ADVANCES (2013)

Add to Collection

Article Materials Science, Multidisciplinary

Synthesis and antimicrobial activity of copper nanoparticles

Jeyaraman Ramyadevi et al.

MATERIALS LETTERS (2012)

Add to Collection

Article Polymer Science

Thermal, Mechanical, and Dielectric Properties of Polystyrene/Expanded Graphite Nanocomposites

R. K. Goyal et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2009)

Add to Collection

Article Polymer Science

Semitransparent poly(styrene-r-maleic anhydride)/alumina nanocomposites for optical applications

Alexander Chandra et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2007)

Add to Collection

Article Thermodynamics

Copper oxide on Cu/Al2O3-TiO2 catalysts TG, FTIR-CO absorption and catalytic activity in the NO reduction by CO

M Moran-Pineda et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2003)

Add to Collection

Article Materials Science, Characterization & Testing

Improvement of the properties of polyethylene with chlorinated polyethylene (CPE)

K Marossy et al.

POLYMERS & POLYMER COMPOSITES (2003)

Add to Collection

Article Chemistry, Applied

PVC/wood-flour composites compatibilized with chlorinated polyethylene

VO Guffey et al.

JOURNAL OF VINYL & ADDITIVE TECHNOLOGY (2002)

Add to Collection

© Peeref 2019-2024. All rights reserved.