4.7 Article

Reduced graphene oxide as an adhesion enhancer of fusion-bonded epoxy coatings

Related references

Note: Only part of the references are listed.
Article Thermodynamics

Effect of defects on heat transfer at the graphene/epoxy interface

Wenhao Wu et al.

Summary: The study indicates that defects in graphene play a crucial role in improving the interface thermal conductivity of G/EP, with Stone-Wales defects being the most effective. The number of graphene layers also affects the thermal conductivity, but the influence becomes steady when the layer number exceeds four. The calculated thermal conductivities are comprehensively analyzed using Phonon Density Of States (PDOS), providing meaningful directions for the practical use of defective graphene in thermal management applications.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2022)

Article Materials Science, Coatings & Films

The influence of the H/E ratio on wear resistance of coating systems - Insights from small-scale testing

Ben D. Beake

Summary: The study explores the correlation between the ratio of hardness to elastic modulus (H/E) of coating systems and their wear resistance. It discusses experimental approaches to determine accurate H/E values and summarises best practice recommendations. Case studies demonstrate the importance of relatively low coating elastic modulus in reducing tensile stresses.

SURFACE & COATINGS TECHNOLOGY (2022)

Article Engineering, Chemical

Examining the effect of graphene nanoplatelets on the corrosion resistance of epoxy coatings

Sotirios Kopsidas et al.

Summary: The study demonstrates that graphene nanoplatelets (GNPs) as fillers in epoxy resin coatings can effectively enhance corrosion resistance within a certain range, but excessive loading can result in electrically-conductive coatings that facilitate corrosion current conduction, reducing their performance.

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2021)

Article Chemistry, Physical

Developing multi-wall carbon nanotubes/Fusion-bonded epoxy powder nanocomposite coatings with superior anti-corrosion and mechanical properties

Shibo Chen et al.

Summary: The study aims to achieve homogeneous dispersion quality of multi-wall carbon nanotubes within fusion-bonded epoxy powder coatings through ball milling and hot melt extrusion. The addition of 0.2 wt% m-MWCNTs improves the corrosion resistance and adhesion strength of the nanocomposite coating. The enhancement in tensile strength by 53.7% due to loading 0.2 wt% m-MWCNTs indicates improved load-transfer and interfacial bonding in the coating.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2021)

Review Polymer Science

Epoxy\Epoxy Composite\Epoxy Hybrid Composite Coatings for Tribological Applications-A Review

M. M. A. Baig et al.

Summary: Epoxy composite coating systems are commonly used in applications to protect components from corrosive media, but their use in demanding tribological applications is limited. Researchers have attempted to enhance the tribological properties of these coatings by utilizing different types of micro/nano-sized fillers.

POLYMERS (2021)

Article Construction & Building Technology

Corrosion initiation mechanisms and service life estimation of concrete systems with fusion-bonded-epoxy (FBE) coated steel exposed to chlorides

Deepak K. Kamde et al.

Summary: This paper evaluates the suitability of various techniques for detecting the corrosion initiation of fusion-bonded-epoxy (FBE) coated steel rebars in concrete, with electrochemical impedance spectroscopy (EIS) identified as the best technique. A new es-ACT test method using EIS is developed to detect corrosion initiation and determine chloride threshold at the coating-steel interface. The paper also discusses a 4-stage degradation process and corrosion initiation process, as well as proposes a method to estimate the service life of reinforced concrete systems with FBE coated rebars.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Article Materials Science, Multidisciplinary

A comparative study of mechanical properties and corrosion behavior of fusion-bonded epoxy and liquid epoxy coatings and their service life in drill pipe applications

Faryad Bigdeli et al.

Summary: The study evaluated the service life and characteristics of fusion-bonded epoxy (FBE) and liquid epoxy coatings on ST37 substrates. Results showed that the FBE coating exhibited superior mechanical properties and corrosion resistance, making it a promising option for the inner coatings of drill pipes. The compactness of the FBE coating structure and its low permeability to aggressive agents were identified as key factors contributing to its superior service life.

MATERIALS RESEARCH EXPRESS (2021)

Review Polymer Science

A Critical Review of the Time-Dependent Performance of Polymeric Pipeline Coatings: Focus on Hydration of Epoxy-Based Coatings

Hossein Zargarnezhad et al.

Summary: The barrier performance of organic coatings is highly influenced by mass transport and the long-term stability of polymeric structure. Studies have shown that the degree of polymer hydration plays a significant role in the permeability/selectivity of gases and ions. Moreover, the combinatorial entropy of glassy epoxy and water vapor mixture impacts membrane plasticization and gas permeation kinetics.

POLYMERS (2021)

Article Chemistry, Physical

Enhanced mechanical properties of epoxy nanocomposites with mildly surface-functionalized graphene oxide by tuned amine species

Jie Fan et al.

Summary: Different methods of surface functionalization of graphene oxide with varying amine grafting densities were studied in this research to prepare corresponding nanocomposites. It was found that graphene oxide functionalized with m-xylylenediamine showed better enhancement of mechanical properties in epoxy resin compared to graphene oxide functionalized with polyetheramine D230. However, nanocomposites modified with graphene oxide with improved amine grafting density did not exhibit the expected enhancement in mechanical properties as revealed by molecular dynamics simulations.

APPLIED SURFACE SCIENCE (2021)

Article Materials Science, Multidisciplinary

Geometry-Dependent Thermal Reduction of Graphene Oxide Solid

Lars Klemeyer et al.

Summary: The thermal reduction process of graphene oxide (GO) solids varies depending on their geometry, affecting the properties and stability of the resulting graphene materials. The study enriches the understanding of GO materials and provides insights for tuning the thermal reduction process to achieve high-performance engineering graphene materials.

ACS MATERIALS LETTERS (2021)

Article Polymer Science

Study on diffusion mechanism and failure behavior of epoxy coatings focusing on synergistic effect of temperature and water molecules

Chao Yang et al.

Summary: The research focuses on the diffusion of water in coatings, using DGEBA epoxy coating as a sample. The study reveals a synergistic effect of temperature and water on DGEBA properties, showing that the diffusion process of water in coatings has two-phase characteristics at different temperatures. The interaction between water and coatings and the formation of water clusters are discussed based on the variation law of swelling coefficient.

DESIGNED MONOMERS AND POLYMERS (2021)

Article Chemistry, Physical

Functionalizing organic powder coatings with nanoparticles through ball milling for wear applications

Maria Fernandez-Alvarez et al.

APPLIED SURFACE SCIENCE (2020)

Review Engineering, Multidisciplinary

Adhesion and cohesion of epoxy-based industrial composite coatings

Hongyu Wei et al.

COMPOSITES PART B-ENGINEERING (2020)

Article Chemistry, Multidisciplinary

Tribological Properties of Different Types of Graphene Nanoplatelets as Additives for the Epoxy Resin

Monica Campo et al.

APPLIED SCIENCES-BASEL (2020)

Article Materials Science, Multidisciplinary

Relationship between the microstructure and local corrosion properties of weld metal in austenitic stainless steels

Shun Tokita et al.

CORROSION SCIENCE (2020)

Review Materials Science, Multidisciplinary

Recent Advances in Graphene Oxide-Based Anticorrosive Coatings: An Overview

Madalina-Ioana Necolau et al.

COATINGS (2020)

Review Chemistry, Physical

Study on graphene modified organic anti-corrosion coatings: A comprehensive review

Rui Ding et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Article Chemistry, Physical

The role of neodymium based thin film on the epoxy/steel interfacial adhesion and corrosion protection promotion

Mehdi Tabatabaei Majd et al.

APPLIED SURFACE SCIENCE (2019)

Article Electrochemistry

Graphene oxide - Ionic liquid composite electrolytes for safe and high-performance supercapacitors

Neuma das M. Pereira et al.

ELECTROCHIMICA ACTA (2018)

Article Electrochemistry

Performance of coating based on APTMS/GO/Epoxy composite for corrosion protection of steel

Chun Feng et al.

INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE (2018)

Article Chemistry, Physical

Aluminum and iron doped graphene for adsorption of methylated arsenic pollutants

Diego Cortes-Arriagada et al.

APPLIED SURFACE SCIENCE (2016)

Article Materials Science, Characterization & Testing

The effects of pile-up, viscoelasticity and hydrostatic stress on polymer matrix nanoindentation

M. Hardiman et al.

POLYMER TESTING (2016)

Review Polymer Science

Review of Applications of Polymer/Carbon Nanotubes and Epoxy/CNT Composites

Ayesha Kausar et al.

POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING (2016)

Review Materials Science, Multidisciplinary

Measurement of fracture toughness by nanoindentation methods: Recent advances and future challenges

M. Sebastiani et al.

CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE (2015)

Article Chemistry, Multidisciplinary

Facile Graphene Oxide Preparation by Microwave-Assisted Acid Method

Marcelo M. Viana et al.

JOURNAL OF THE BRAZILIAN CHEMICAL SOCIETY (2015)

Article Thermodynamics

An investigation into the curing of epoxy powder coating systems

Laszlo Halasz et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2015)

Article Chemistry, Physical

Recent advances in the use of graphene-family nanoadsorbents for removal of toxic pollutants from wastewater

Shamik Chowdhury et al.

ADVANCES IN COLLOID AND INTERFACE SCIENCE (2014)

Article Chemistry, Physical

Graphene oxide nanopaint

Karthikeyan Krishnamoorthy et al.

CARBON (2014)

Article Engineering, Multidisciplinary

Characterizing thermal and mechanical properties of graphene/epoxy nanocomposites

Sung-Chiun Shiu et al.

COMPOSITES PART B-ENGINEERING (2014)

Article Thermodynamics

Polymerization kinetics of boron carbide/epoxy composites

J. Abenojar et al.

THERMOCHIMICA ACTA (2014)

Article Materials Science, Multidisciplinary

Glass transition improvement in epoxy/graphene composites

Helio Ribeiro et al.

JOURNAL OF MATERIALS SCIENCE (2013)

Article Materials Science, Multidisciplinary

Reduced graphene oxide

S. V. Tkachev et al.

INORGANIC MATERIALS (2012)

Article Engineering, Multidisciplinary

Fusion bonded epoxy mainline and field joint coatings performance from the X100 field trial - A case study

A. N. K. Jadoon et al.

INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (2012)

Article Engineering, Mechanical

Friction and wear of powder coatings of epoxy composites with alumosilicate nanoparticles

A. Ya. Grigoriev et al.

JOURNAL OF FRICTION AND WEAR (2012)

Article Polymer Science

Cationic photocured epoxy nanocomposites filled with different carbon fillers

M. Martin-Gallego et al.

POLYMER (2012)

Article Engineering, Multidisciplinary

Characterization of carbon nanofiber/epoxy nanocomposites by the nanoindentation technique

M. Sanchez et al.

COMPOSITES PART B-ENGINEERING (2011)

Article Chemistry, Multidisciplinary

Processing and properties of carbon nanofibers reinforced epoxy powder composites

C. Palencia et al.

JOURNAL OF NANOPARTICLE RESEARCH (2011)

Review Chemistry, Applied

Effect of nano-sized calcium carbonate on cure kinetics and properties of polyester/epoxy blend powder coatings

Mohammadreza Kalaee et al.

PROGRESS IN ORGANIC COATINGS (2011)

Article Polymer Science

Functionalised multi-walled carbon nanotubes for epoxy nanocomposites with improved performance

Gordon Armstrong et al.

POLYMER INTERNATIONAL (2009)

Article Polymer Science

High impact strength epoxy nanocomposites with natural nanotubes

Yueping Ye et al.

POLYMER (2007)

Article Materials Science, Coatings & Films

Epoxy-based thermosetting powder coatings: Surface appearance, scratch adhesion and wear resistance

M. Barletta et al.

SURFACE & COATINGS TECHNOLOGY (2007)

Article Multidisciplinary Sciences

Electric field effect in atomically thin carbon films

KS Novoselov et al.

SCIENCE (2004)

Article Materials Science, Coatings & Films

Novel composite coating technology in primary and conversion industry applications

BW Allcock et al.

SURFACE & COATINGS TECHNOLOGY (2003)

Article Engineering, Chemical

Corrosion and mechanical behavior of fusion bonded epoxy (FBE) in aqueous media

AU Malik et al.

DESALINATION (2002)

Review Chemistry, Applied

Cure characterization of powder coatings

EG Belder et al.

PROGRESS IN ORGANIC COATINGS (2001)