☆ 4.7 Article

Suppression effect of expandable graphite on fire hazard of dust layers

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2022)

Related references

Note: Only part of the references are listed.

Article Engineering, Environmental

Inhibition evaluation of magnesium hydroxide, aluminum hydroxide, and hydrotalcite on the flame propagation of coal dust

Hepeng Yin et al.

Summary: The study investigated the flame propagation characteristics of coal dust in a syngas atmosphere and compared the inhibitory effects of three inhibitors, showing significant differences in effectiveness. Hydrotalcite demonstrated the best inhibition effect, effectively protecting coal dust with the lowest decomposition temperature.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2022)

Add to Collection

Article Engineering, Environmental

A new accident causation theory based on systems thinking and its systemic accident analysis method of work systems

Ji Ge et al.

Summary: Major accidents have occurred worldwide, leading safety scientists to constantly strive to understand why they happen and how to prevent them. New accident causation theories and analysis methods have been proposed, incorporating multiple factors for a comprehensive understanding. Further research is needed to assess the reliability and validity of these new approaches.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2022)

Add to Collection

Article Engineering, Environmental

Effect of inclination angle on fire hazard of melting dust layers

Fanyi Meng et al.

Summary: This study investigated the effects of melting fluidity, sample inclination angle, and layer thickness on the fire hazard of melting dusts. The results showed that sulfur with excellent melting fluidity could significantly increase downward flame spread velocity at a small inclination angle. Anthraquinone with moderate melting fluidity exhibited increased flame spread velocity with both upward and downward dust layer inclination. Polystyrene and magnesium, which have weak melting fluidity, were less affected by dust layer inclination angle. Increasing the thickness of dust layers enhanced the promotion effect of inclination angle on the flow of molten material, thereby affecting flame spread velocity. It is important to consider these findings in industries or activities involving powders with melting capability.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2022)

Add to Collection

Article Engineering, Environmental

Fabrication of fire safe rigid polyurethane foam with reduced release of CO and NOx and excellent physical properties by combining phosphine oxide-containing hyperbranched polyol and expandable graphite

Chao Ma et al.

Summary: A novel phosphine oxide-containing hyperbranched polyol was synthesized and incorporated into rigid polyurethane foam. The addition of this polyol resulted in improved compressive strength, decreased density and thermal conductivity, and excellent fire resistance properties.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Thermodynamics

A computational study on the quenching and near-limit propagation of smoldering combustion

Shaorun Lin et al.

Summary: The study investigated the limiting quenching conditions of in-depth smoldering propagation, with simulation results agreeing well with experiments. Further analysis revealed that both the smoldering temperature and propagation rate increase with sample width and eventually approach their maximum values.

COMBUSTION AND FLAME (2022)

Add to Collection

Article Engineering, Environmental

A robust two-dimensional model for the pyrolysis of plastic waste driven by self-sustaining smoldering

Ruming Pan et al.

Summary: This study established a robust two-dimensional numerical model for plastic waste pyrolysis driven by self-sustaining smoldering, finding that the pyrolysis duration and product distribution could be regulated by the char concentration and Darcy air velocity. Higher plastic waste contents shorten the residence time of volatiles in the pyrolysis chamber and control the pyrolysis product yields.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2022)

Add to Collection

Article Engineering, Environmental

Effect of powder inhibitors on ignition sensitivity evolution of wood-plastic mixed dust: Based on thermal decomposition behavior and deflagration residues

Lijuan Liu et al.

Summary: The ignition temperature of combustible dust is an important parameter for assessing the risk of dust deflagration. This study investigated the effects of dust concentration and dispersed pressure on the ignition temperature of wood plastic mixed dust, as well as the inhibition effects of different powder inhibitors. The study also analyzed the thermal decomposition behavior of the mixed dust and the surface characteristics of the deflagration products, revealing the inhibition mechanisms of the inhibitors. The results showed that ammonium polyphosphate and aerosil had significant inhibition effects on the ignition sensitivity of wood plastic mixed dust, with ammonium polyphosphate exhibiting a better inhibition effect.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2022)

Add to Collection

Review Engineering, Industrial

Accident causation models developed in China between 1978 and 2018: Review and comparison

Ji Ge et al.

Summary: This article discusses the development, classification, and impact of various accident causation models proposed by Chinese researchers. These models have had a certain influence on safety science research and government policy formulation.

SAFETY SCIENCE (2022)

Add to Collection

Article Engineering, Environmental

Comparison between a numerical model and the classic thermal explosion theories for the calculation of the minimum ignition temperature of dust clouds

Tengfei Chen et al.

Summary: The numerical model for the calculation of minimum ignition temperature of dust clouds is compared with classic thermal explosion theories, showing good agreement. This study can provide reference for theoretical prediction of MIT of dust clouds.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2022)

Add to Collection

Article Energy & Fuels

Opposite effects of typical solid inertants on flame propagation in Mg dust clouds versus dust layers

Fanyi Meng et al.

Summary: This study investigated the efficacy of four commonly used solid inertants in reducing the fire hazard of magnesium dust layers and dust clouds. It was found that three of the inertants increased the fire hazard in dust layers, while only NaCl effectively inerted both dust layers and dust clouds. Therefore, research on dust explosion prevention or mitigation should consider the impact on both dust layers and dust clouds.

FUEL (2022)

Add to Collection

Article Engineering, Environmental

Computational assessment of biomass dust explosions in the 20L sphere

Alain Islas et al.

Summary: This study conducted numerical simulations of biomass dust explosions using the open-source CFD code OpenFOAM and found that the characteristics of cold flow, particle size, dust concentration, and ignition delay time have significant effects on the explosion process.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2022)

Add to Collection

Article Thermodynamics

Smoldering propagation and blow-off on consolidated fuel under external airflow

Shaorun Lin et al.

Summary: This study quantifies the propagation rates of smoldering combustion and the blow-off limits under external airflows up to 50 m/s. It finds that smoldering propagation rate first increases to its maximum value, then remains stable, and finally slightly decreases until blow-off. The blow-off airflow velocity of smoldering combustion is around ten times larger than that of flaming combustion, and it decreases as the fuel diameter or density increases.

COMBUSTION AND FLAME (2021)

Add to Collection

Article Energy & Fuels

Effect of calcium chloride on the self-ignition behaviours of coal using hot-plate test

Bei Li et al.

Summary: The study found that calcium chloride treatment had both inhibitory and catalytic effects on coal self-ignition behavior, with significant inhibition at low temperatures and more pronounced promotion at high temperatures. The slurry-like envelope and oxides formed by calcium chloride may play an important catalytic role in the combustion process of coal.

FUEL (2021)

Add to Collection

Article Engineering, Environmental

Effects of dust dispersibility on the suppressant enhanced explosion parameter (SEEP) in flame propagation of Al dust clouds

Yajie Bu et al.

Summary: This study confirms the suppressant enhanced explosion parameter (SEEP) phenomenon in aluminum dust explosion moderation, revealing that the addition of micrometer-sized Al2O3 powder can improve dust dispersibility, decrease the effective particle size distribution (PSD) of Al dust, and effectively prevent SEEP occurrence.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Add to Collection

Article Engineering, Chemical

Flame propagation behavior of aluminum nanopowder in bulk layer

Olga B. Nazarenko et al.

Summary: The study investigated flame propagation parameters of aluminum nanopowder in bulk layer, finding that ignition source type influences the parameters of the first combustion stage, and the bulk layer inclination angle affects flame propagation parameters.

JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2021)

Add to Collection

Article Engineering, Environmental

Study into parameters of the dust explosion ignited by an improvised explosion device filled with organic peroxide

Richard Kuracina et al.

Summary: This study examined the explosion parameters of dispersed dust ignited by an improvised explosive device, finding that the achieved parameters were slightly lower than when using a commercial igniter. These findings may be relevant for the design of explosion prevention devices.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2021)

Add to Collection

Article Engineering, Environmental

Influence of venting coefficient on disastrous effects of aluminium powder explosions

Kai Yang et al.

Summary: Research using CFD on the explosion and venting processes of aluminium dust revealed that increasing the venting coefficient can reduce indoor overpressure and explosion temperature, but also increase outdoor damage distance. Thus, current safety protection distances for aluminium powder production sites need revision.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2021)

Add to Collection

Article Engineering, Environmental

Characteristics of self-ignition and smoldering of coal dust layer under inclination conditions

Xueqiang Shi et al.

Summary: The study investigated the self-ignition and smoldering characteristics of coal dust layers in inclined situations using a two-dimensional transient numerical model. Results showed significant effects of inclination angle and hot plate temperature on ignition delay time and minimum ignition temperature of coal dust.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2021)

Add to Collection

Article Engineering, Chemical

The effects of phosphorus-free inhibitors on the ignition of lycopodium dust

Jianxu Ding et al.

Summary: The ignition behavior of solid mixtures containing flammable fuels and phosphorus-free inhibitors requires further experimental and theoretical analyses to understand their effects on ignition temperatures. Inhibitors may have counter-productive effects on layer ignition temperature, despite showing positive effects on the minimum ignition temperature of dust suspension. The thermal properties of the mixture, analyzed using Maxwell's equation, and the weaknesses of standard empirical correlations for predicting ignition temperature of solid mixtures were investigated.

JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2021)

Add to Collection

Article Thermodynamics

A novel methodology for evaluating the inhibitory effect of chloride salts on the ignition risk of coal spontaneous combustion

Hongpeng Lv et al.

Summary: The study analyzed the ignition risk of coal spontaneous combustion under the influence of NaCl, KCl, and MgCl2 solution, finding that using MgCl2 solution has the maximum inhibitory effect and the minimum risk index. Sodium chloride and potassium chloride promoted coal spontaneous combustion, while the hydrate formed by magnesium chloride consistently inhibited it.

ENERGY (2021)

Add to Collection

Article Engineering, Civil

Fire hazard potential of non-metallic powder layers induced by deposit surfaces

Jingzhi Cai et al.

Summary: Combustible dust can lead to catastrophic explosions compared to combustible gases or vapors. The thermal conductivity of deposit surfaces plays a complex role in layer fire hazard, while good permeability deposit surfaces combined with a large inclination angle significantly increase the fire hazard.

FIRE SAFETY JOURNAL (2021)

Add to Collection

Article Engineering, Chemical

Experimental study of the influence of particle size on Minimum Explosible Concentration of sulfur dust

Jack M. Altwal et al.

Summary: This study investigates the explosion properties of sulfur dust, finding that the MEC of sulfur dust falls between 55 and 105 g/m3, and the particle size influences the MEC. Additionally, it is observed that particle breakage of sulfur dust is inversely proportional to concentration.

JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2021)

Add to Collection

Article Engineering, Chemical

Effect of superfine KHCO3 and ABC powder on ignition sensitivity of PMMA dust layer

Lei Huang et al.

Summary: Experimental investigation showed that KHCO3 and ABC can extend the ignition time of PMMA dust layer, increase the critical heating temperature of the dust layer, and inhibit the combustion of PMMA through mechanisms such as decomposition and product coverage.

JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2021)

Add to Collection

Article Engineering, Chemical

Effect of particle size and dust layer size on ignition characteristics of PMMA dust layer on hot surface

Lei Huang et al.

Summary: This study investigated the ignition characteristics of PMMA dust layer, finding that as the dust layer thickness increased, the gas transport path became longer, resulting in higher critical heating temperatures and longer ignition times. Additionally, an increase in characteristic particle size also led to longer ignition times.

JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2021)

Add to Collection

Article Engineering, Environmental

Synthesis of green nanomaterial and discussion on its suppression performance and mechanism to aluminum dust explosion

Sheng Shang et al.

Summary: The experimental results show that MCN can significantly reduce the flame propagation speed and intensity of aluminum dust, providing a potential direction for developing efficient suppressants for aluminum dust explosions.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2021)

Add to Collection

Article Engineering, Environmental

Hazard evaluation, explosion risk, and thermal behaviour of magnesium- aluminium alloys during the polishing process by using a 20-L apparatus, MIEA, and TGA

Jing-Wen Luo et al.

Summary: This study analyzed the thermal characteristics of magnesium-aluminium alloy powders, finding that powders of different particle sizes exhibited variations in explosion pressure, limiting oxygen concentration, and activation energy. Smaller particle sizes showed higher reactivity and lower minimum ignition temperature, highlighting the importance of attention in handling these powders.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2021)

Add to Collection

Article Engineering, Environmental

Moderation of Al dust explosions by micro- and nano-sized AL2O3 powder

Yajie Bu et al.

JOURNAL OF HAZARDOUS MATERIALS (2020)

Add to Collection

Article Engineering, Chemical

Suppression of aluminum dust explosions by expandable graphite

Tianjiao Zhang et al.

POWDER TECHNOLOGY (2020)

Add to Collection

Article Engineering, Chemical

Characterization of Ti powders mixed with TiO2 powders: Thermal and kinetic studies

Fanyi Meng et al.

JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2020)

Add to Collection

Article Chemistry, Physical

Synergistic improvement of flame retardant properties of expandable graphite and multi-walled carbon nanotube reinforced intumescent polyketone nanocomposites

Suyeon Lee et al.

CARBON (2019)

Add to Collection

Article Thermodynamics

Flame inhibition of aluminum dust explosion by NaHCO3 and NH4H2PO4

Haipeng Jiang et al.

COMBUSTION AND FLAME (2019)

Add to Collection

Article Engineering, Environmental

Effects of particle size, dust concentration and dust-dispersion-air pressure on rock dust inertant requirement for coal dust explosion suppression in underground coal mines

Sikandar Azam et al.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2019)

Add to Collection

Article Engineering, Environmental

Effect of solid inertants and sample inclination angle on fire hazard of metallic powder layers

Jingzhi Cai et al.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2019)

Add to Collection

Article Engineering, Environmental

Experimental study on thermal structure inside flame front with a melting layer for downward flame spread of XPS foam

Shengfeng Luo et al.

JOURNAL OF HAZARDOUS MATERIALS (2019)

Add to Collection

Article Engineering, Environmental

Suppression of wood dust explosion by ultrafine magnesium hydroxide

Chuyuan Huang et al.

JOURNAL OF HAZARDOUS MATERIALS (2019)

Add to Collection

Article Engineering, Environmental

A study on the FTIR spectra of pre- and post-explosion coal dust to evaluate the effect of functional groups on dust explosion

Song Lin et al.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2019)

Add to Collection

Article Engineering, Environmental

Prevention of explosion accidents by employing boron instead of aluminium in flash powder

A. Azhagurajan et al.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Evaluation of the expandable graphite/polyaniline combination in intumescent coatings

A. F. Baldissera et al.

SYNTHETIC METALS (2019)

Add to Collection

Article Engineering, Chemical

Effect of admixture of solid inertant on fire hazard of dust layers oriented at varying degrees of inclination

Jingzhi Cai et al.

JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2019)

Add to Collection

Article Thermodynamics

Investigation of the structure and spread rate of flames over PMMA slabs

H. R. Rakesh Ranga et al.

APPLIED THERMAL ENGINEERING (2018)

Add to Collection

Article Thermodynamics

Experimental investigation on downward flame spread over rigid polyurethane and extruded polystyrene foams

Yang Zhou et al.

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2018)

Add to Collection

Article Engineering, Environmental

Inhibition of aluminum dust explosion by NaHCO3 with different particle size distributions

Haipeng Jiang et al.

JOURNAL OF HAZARDOUS MATERIALS (2018)

Add to Collection

Article Engineering, Environmental

Sample width and thickness effects on upward flame spread over PMMA surface

Lin Jiang et al.

JOURNAL OF HAZARDOUS MATERIALS (2018)

Add to Collection

Article Engineering, Environmental

Fire hazard of titanium powder layers mixed with inert nano TiO2 powder

Chunmiao Yuan et al.

JOURNAL OF HAZARDOUS MATERIALS (2018)

Add to Collection

Article Materials Science, Characterization & Testing

Enhancement of physical and reaction to fire properties of crude glycerol polyurethane foams filled with expanded graphite

Nuno Gama et al.

POLYMER TESTING (2018)

Add to Collection

Article Energy & Fuels

Effects of Different Additives on the Ignition and Combustion Characteristics of Micrometer-Sized Aluminum Powder in Steam

Baozhong Zhu et al.

ENERGY & FUELS (2017)

Add to Collection

Article Engineering, Chemical

Electric spark ignition sensitivity of nano and micro Ti powder layers in the presence of inert nano TiO2 powder

Chunmiao Yuan et al.

JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2017)

Add to Collection

Article Engineering, Chemical

Flame propagation behaviours in nano-metal dust explosions

Wei Gao et al.

POWDER TECHNOLOGY (2017)

Add to Collection

Article Thermodynamics

Sample width and thickness effects on horizontal flame spread over a thin PMMA surface

Lin Jiang et al.

PROCEEDINGS OF THE COMBUSTION INSTITUTE (2017)

Add to Collection

Article Engineering, Environmental

Explosibility of metallic waste dusts

Luca Marmo et al.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2017)

Add to Collection

Article Thermodynamics

Effect of expandable graphite on flame retardant, thermal and mechanical properties of thermoplastic polyurethane composites filled with huntite&hydromagnesite mineral

Turkan Guler et al.

THERMOCHIMICA ACTA (2017)

Add to Collection

Article Engineering, Manufacturing

Natural fiber reinforced expandable graphite filled composites: Evaluation of the flame retardancy, thermal and mechanical performances

P. Khalili et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2017)

Add to Collection

Article Engineering, Chemical

A catastrophic aluminium-alloy dust explosion in China

G. Li et al.

JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2016)

Add to Collection

Article Polymer Science

Bio-based polyurethane-polyisocyanurate composites with an intumescent flame retardant

Maria Kuranska et al.

POLYMER DEGRADATION AND STABILITY (2016)

Add to Collection

Review Engineering, Chemical

Dustiness in workplace safety and explosion protection - Review and outlook

Alexander Klippel et al.

JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2015)

Add to Collection

Article Engineering, Chemical

Minimum Ignition Temperature of layer and cloud dust mixtures

Enrico Danzi et al.

JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2015)

Add to Collection

Article Engineering, Environmental

Dust explosions: A threat to the process industries

Zhi Yuan et al.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2015)

Add to Collection

Article Engineering, Environmental

Minimum ignition temperature of nano and micro Ti powder clouds in the presence of inert nano TiO2 powder

Chunmiao Yuan et al.

JOURNAL OF HAZARDOUS MATERIALS (2014)

Add to Collection

Article Engineering, Chemical

Self ignition of layers of metal powder mixtures

Olivier Dufaud et al.

POWDER TECHNOLOGY (2014)

Add to Collection

Article Engineering, Environmental

Experimental investigation of the influence of inert solids on ignition sensitivity of organic powders

Agnes Janes et al.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2014)

Add to Collection

Article Engineering, Environmental

Some myths and realities about dust explosions

Paul R. Amyotte

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2014)

Add to Collection

Article Thermodynamics

Heat transfer mechanisms in horizontal flame spread over wood and extruded polystyrene surfaces

Y. Zhang et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2013)

Add to Collection

Article Engineering, Chemical

Investigations into the influence of dustiness on dust explosions

Alexander Klippel et al.

JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2013)

Add to Collection

Article Thermodynamics

Prediction of the critical condition for flame acceleration over wood surface with different sample orientations

Ying Zhang et al.

COMBUSTION AND FLAME (2012)

Add to Collection

Article Engineering, Chemical

When solids meet solids: A glimpse into dust mixture explosions

Olivier Dufaud et al.

JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2012)

Add to Collection

Article Polymer Science

Influence of char residues on flammability of EVA/EG, EVA/NG and EVA/GO composites

Xinfeng Wu et al.

POLYMER DEGRADATION AND STABILITY (2012)

Add to Collection

Article Polymer Science

Synergistic effect between expandable graphite and ammonium polyphosphate on flame retarded polylactide

Hongfang Zhu et al.

POLYMER DEGRADATION AND STABILITY (2011)

Add to Collection

Article Engineering, Chemical

Interaction of powdery Al, Zr and Ti with atmospheric nitrogen and subsequent nitride formation under the metal powder combustion in air

Alexander Alexandrovich Gromov et al.

POWDER TECHNOLOGY (2011)

Add to Collection

Article Engineering, Civil

Effects of particle size on flame spread over magnesium powder layer

Yuji Kudo et al.

FIRE SAFETY JOURNAL (2010)

Add to Collection

Article Polymer Science

The production and properties of polylactide composites filled with expanded graphite

Marius Murariu et al.

POLYMER DEGRADATION AND STABILITY (2010)

Add to Collection

Article Engineering, Environmental

A means to estimate thermal and kinetic parameters of coal dust layer from hot surface ignition tests

Haejun Park et al.

JOURNAL OF HAZARDOUS MATERIALS (2009)

Add to Collection

Article Engineering, Chemical

Understanding dust explosions. The role of powder science and technology

R. K. Eckhoff

JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2009)

Add to Collection

Article Polymer Science

Synthesis and characterization of expandable graphite-poly(methyl methacrylate) composite particles and their application to flame retardation of rigid polyurethane foams

Ling Ye et al.

POLYMER DEGRADATION AND STABILITY (2009)

Add to Collection

Article Engineering, Environmental

Application of inherent safety principles to dust explosion prevention and mitigation

Paul R. Amyotte et al.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2009)

Add to Collection

Article Polymer Science

Effect of Expandable Graphite on the Properties of Intumescent Flame-Retardant Polyurethane Foam

M. Thirumal et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2008)

Add to Collection

Article Engineering, Chemical

Moderation of dust explosions

Paul R. Amyotte et al.

JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2007)

Add to Collection

Article Polymer Science

Dependence of flame-retardant properties on density of expandable graphite filled rigid polyurethane foam

Xiang-Cheng Bian et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2007)

Add to Collection

Article Thermodynamics

Combustion of nano-aluminum and liquid water

G. A. Risha et al.

PROCEEDINGS OF THE COMBUSTION INSTITUTE (2007)

Add to Collection

Article Engineering, Chemical

Solid inertants and their use in dust explosion prevention and mitigation

PR Amyotte

JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2006)

Add to Collection

Article Engineering, Chemical

Ignition of a dust layer by a constant heat flux-heat transport in the layer

Z Dyduch et al.

JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2006)

Add to Collection

Article Engineering, Chemical

Ignitions of explosive dust clouds by smouldering and flaming agglomerates

J Gummer et al.

JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2003)

Add to Collection

Article Engineering, Chemical

Explosion protection with metal dust fuels

JE Going et al.

PROCESS SAFETY PROGRESS (2002)

Add to Collection

Article Polymer Science

Expandable graphite as an intumescent flame retardant in polyisocyanurate-polyurethane foams

M Modesti et al.

POLYMER DEGRADATION AND STABILITY (2002)

Add to Collection

Article Polymer Science

A comparative study of the mechanism of action of ammonium polyphosphate and expandable graphite in polyurethane

S Duquesne et al.

POLYMER DEGRADATION AND STABILITY (2002)

Add to Collection

Article Polymer Science

Expandable graphite systems for halogen-free flame-retarding of polyolefins. I. Flammability characterization and synergistic effect

RC Xie et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2001)

Add to Collection

Article Polymer Science

Expandable graphite systems for halogen-free flame-retarding of polyolefins. II. Structures of intumescent char and flame-retardant mechanism

RC Xie et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2001)

Add to Collection

Article Polymer Science

Thermal degradation of polyurethane and polyurethane/expandable graphite coatings

S Duquesne et al.

POLYMER DEGRADATION AND STABILITY (2001)

Add to Collection

© Peeref 2019-2024. All rights reserved.