Related references
Note: Only part of the references are listed.CFD simulations of turbulent dust dispersion in the 20 L vessel using OpenFOAM
Alain Islas et al.
POWDER TECHNOLOGY (2022)
Numerical modelling of the effects of vessel length-to-diameter ratio (L/D) on pressure piling
Damilare Ogungbemide et al.
JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2021)
A detailed computational fluid dynamics model on biomass pellet smoldering combustion and its parametric study
Xiyan Li et al.
CHEMICAL ENGINEERING SCIENCE (2021)
Determination of Zero Dimensional, Apparent Devolatilization Kinetics for Biomass Particles at Suspension Firing Conditions
Anna Espekvist et al.
ENERGIES (2021)
Influence of venting coefficient on disastrous effects of aluminium powder explosions
Kai Yang et al.
PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2021)
Influence of components interaction on pyrolysis and explosion of biomass dust
Aihua Liu et al.
PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2021)
On the pyrotechnic ignitors role in dust explosion testing: Comparison between 20 L and 1 m3 explosion vessels
Maria Portarapillo et al.
PROCESS SAFETY PROGRESS (2021)
Kinetic model study on biomass pyrolysis and CFD application by using pseudo-Bio-CPD model
Jiaye Zhang et al.
FUEL (2021)
Characteristic evaluation of aluminum dust explosion venting with high static activation pressure
Mingrui Yang et al.
PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2021)
Turbophoresis of small inertial particles: theoretical considerations and application to wall-modelled large-eddy asimulations
Perry L. Johnson et al.
JOURNAL OF FLUID MECHANICS (2020)
Experimental investigations of the ignition delay time, initial ignition energy and lower explosion limit of zirconium powder clouds in a 20 L cylindrical vessel
Xianzhao Song et al.
PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2020)
Minimum explosion concentration of coal dusts in air with small amount of CH4/H2/CO under 10-kJ ignition energy conditions
Peng Zhao et al.
FUEL (2020)
Experimental and CFD-DEM study of the dispersion and combustion of wheat starch and carbon-black particles during the standard 20L sphere test
Jose Serrano et al.
JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2020)
Numerical study on hydrodynamics and explosion hazards of corn starch at high-temperature environments
Dan Wang et al.
POWDER TECHNOLOGY (2020)
Suppression of pulverized biomass dust explosion by NaHCO3 and NH4H2PO4
Haipeng Jiang et al.
RENEWABLE ENERGY (2020)
Influence of ignition delay on explosion severities of the methane-coal particle hybrid mixture at elevated injection pressures
Haitao Li et al.
POWDER TECHNOLOGY (2020)
CFD-DPM and experimental study of the dynamics of wheat starch powder/pyrolysis gases hybrid mixtures in the 20-L Sphere
Paula Pico et al.
POWDER TECHNOLOGY (2020)
CFD analysis and experimental study on the effect of oxygen level, particle size, and dust concentration on the flame evolution characteristics and explosion severity of cornstarch dust cloud deflagration in a spherical chamber
Haitao Li et al.
POWDER TECHNOLOGY (2020)
Flame behaviours and deflagration severities of aluminium powder-air mixture in a 20-L sphere: Computational fluid dynamics modelling and experimental validation
Haitao Li et al.
FUEL (2020)
CFD Simulation of the Dispersion of Binary Dust Mixtures in the 20 L Vessel
Maria Portarapillo et al.
JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2020)
Kinetic free mathematical model for the prediction of Kst values for organic dusts with arbitrary particle size distribution
Martina Silvia Scotton et al.
JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2020)
Analysis of the explosion behaviour of wheat starch/pyrolysis gases hybrid mixtures through experimentation and CFD-DPM simulations
Paula Pico et al.
POWDER TECHNOLOGY (2020)
CFD simulations of dust dispersion in the 1 m3 explosion vessel
Maria Portarapillo et al.
JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2020)
Classification of particle breakage due to dust dispersion
Pranav Bagaria et al.
POWDER TECHNOLOGY (2019)
Suppression of nano-polymethyl methacrylate dust explosions by ABC powder
Jianhua Zhou et al.
PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2019)
Improved partial inerting MIE test method for combustible dusts and its CFD validation
Purvali Chaudhari et al.
PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2019)
A predictive model for the estimation of the deflagration index of organic dusts
Sabrina Copelli et al.
PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2019)
A study on the FTIR spectra of pre- and post-explosion coal dust to evaluate the effect of functional groups on dust explosion
Song Lin et al.
PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2019)
Explosion parameters and combustion kinetics of biomass dust
Aihua Liu et al.
BIORESOURCE TECHNOLOGY (2019)
Effect of the ignition delay time on explosion severity parameters of coal dust/air mixtures
Shunyao Wang et al.
POWDER TECHNOLOGY (2019)
A refined global reaction mechanism for modeling coal combustion under moderate or intense low-oxygen dilution condition
Feifei Wang et al.
ENERGY (2018)
A kinetic free mathematical model for the prediction of the KSt reduction with the particle size increase
Anna Fumagalli et al.
JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2018)
Proposal of a new injection nozzle to improve the experimental reproducibility of dust explosion tests
Carlos Murillo et al.
POWDER TECHNOLOGY (2018)
Combustion behaviors and temperature characteristics in pulverized biomass dust explosions
Haipeng Jiang et al.
RENEWABLE ENERGY (2018)
Far-field pressure prediction of a vented gas explosion from storage tanks by using new CFD simulation guidance
Jingde Li et al.
PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2018)
Lower flammability limits of hybrid mixtures containing 10 micron coal dust particles and methane gas
Chris T. Cloney et al.
PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2018)
High Heating Rate Devolatilization Kinetics of Pulverized Biomass Fuels
Joakim M. Johansen et al.
ENERGY & FUELS (2018)
The effect of turbulence on mass transfer rates of small inertial particles with surface reactions
Nils Erland L. Haugen et al.
JOURNAL OF FLUID MECHANICS (2018)
Experimental evaluation and analysis of methane fire and explosion mitigation using isolation valves integrated with a vent system
Mohammed J. Ajrash et al.
JOURNAL OF HAZARDOUS MATERIALS (2017)
Igniter-induced hybrids in the 20-l sphere
J. R. Taveau et al.
JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2017)
Prediction of the deflagration index for organic dusts as a function of the mean particle diameter
Anna Fumagalli et al.
JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2017)
Vented Methane-air Explosion Overpressure Calculation-A simplified approach based on CFD
Jingde Li et al.
PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2017)
Ignition of Combustible Dust Clouds by Strong Capacitive Electric Sparks of Short Discharge Times
Rolf K. Eckhoff
ZEITSCHRIFT FUR PHYSIKALISCHE CHEMIE-INTERNATIONAL JOURNAL OF RESEARCH IN PHYSICAL CHEMISTRY & CHEMICAL PHYSICS (2017)
Devolatilization kinetics of woody biomass at short residence times and high heating rates and peak temperatures
Joakim M. Johansen et al.
APPLIED ENERGY (2016)
Analysis of explosion characteristics of combustible wood dust in confined system using the thermal decomposition rate and mass loss rate
Min Chul Lee et al.
APPLIED THERMAL ENGINEERING (2016)
Retrospective risk analysis and controls for Semabla grain storage hybrid, mixture explosion
Meftah Abuswer et al.
PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2016)
Explosion characteristics of pulverised torrefied and raw Norway spruce (Picea abies) and Southern pine (Pinus palustris) in comparison to bituminous coal
C. Huescar Medina et al.
BIOMASS & BIOENERGY (2015)
Comparison of the explosion characteristics and flame speeds of pulverised coals and biomass in the ISO standard 1 m3 dust explosion equipment
Clara Huescar Medina et al.
FUEL (2015)
Explosion reactivity characterisation of pulverised torrefied spruce wood
Clara Huescar Medina et al.
JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2015)
Biomass explosion testing: Accounting for the post-test residue and implications on the results
David J. F. Slatter et al.
JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2015)
Visualization and analysis of dispersion process of combustible dust in a transparent Siwek 20-L chamber
Bing Du et al.
JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2015)
Explosion characteristics of three component hybrid mixtures
Emmanuel Kwasi Addai et al.
PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2015)
Dust explosions: A threat to the process industries
Zhi Yuan et al.
PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2015)
Analysis of dust distribution in silo during axial filling using computational fluid dynamics: Assessment on dust explosion likelihood
S. I. Rani et al.
PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2015)
Methods and models in process safety and risk management: Past, present and future
Faisal Khan et al.
PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2015)
Review on CFD based models for co-firing coal and biomass
F. Tabet et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2015)
Evaluation of Planck mean coefficients for particle radiative properties in combustion environments
Henrik Hofgren et al.
HEAT AND MASS TRANSFER (2015)
Assessing the Role of Particles in Radiative Heat Transfer during Oxy-Combustion of Coal and Biomass Blends
Gautham Krishnamoorthy et al.
JOURNAL OF COMBUSTION (2015)
Eulerian-Lagrangian Simulation of Biomass Gasification Behavior in a High-Temperature Entrained-Flow Reactor
Xiaoke Ku et al.
ENERGY & FUELS (2014)
Spanish biofuels heating value estimation. Part I: Ultimate analysis data
Roberto Garcia et al.
FUEL (2014)
CFD simulations of dust dispersion in the 20 L vessel: Effect of nominal dust concentration
V. Di Sarli et al.
JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2014)
Experimental and numerical study on flame propagation behaviors in coal dust explosions
Weiguo Cao et al.
POWDER TECHNOLOGY (2014)
Some myths and realities about dust explosions
Paul R. Amyotte
PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2014)
CFD simulations of turbulent fluid flow and dust dispersion in the 20 liter explosion vessel
A. Di Benedetto et al.
AICHE JOURNAL (2013)
Dust explosions: CFD modeling as a tool to characterize the relevant parameters of the dust dispersion
Carlos Murillo et al.
CHEMICAL ENGINEERING SCIENCE (2013)
Prediction of Sawdust Pyrolysis Yields from a Flat-Flame Burner Using the CPD Model
Aaron D. Lewis et al.
ENERGY & FUELS (2013)
Effects of firing coal and biomass under oxy-fuel conditions in a power plant boiler using CFD modelling
S. Black et al.
FUEL (2013)
Suitability of ignition source exploding wire for determination of dust explosion characteristics in the 20-L-sphere
Marc Scheid et al.
JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2013)
Dust explosion venting of small vessels and flameless venting
P. Holbrow
PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2013)
Review of fast pyrolysis of biomass and product upgrading
A. V. Bridgwater
BIOMASS & BIOENERGY (2012)
COMPARISON OF DIFFERENT GLOBAL COMBUSTION MECHANISMS UNDER HOT AND DILUTED OXIDATION CONDITIONS
Lin Wang et al.
COMBUSTION SCIENCE AND TECHNOLOGY (2012)
Prediction of Tar and Light Gas during Pyrolysis of Black Liquor and Biomass
Thomas H. Fletcher et al.
ENERGY & FUELS (2012)
Towards a better understanding of biomass suspension co-firing impacts via investigating a coal flame and a biomass flame in a swirl-stabilized burner flow reactor under same conditions
Chungen Yin et al.
FUEL PROCESSING TECHNOLOGY (2012)
New correlations for the weighted-sum-of-gray-gases model in oxy-fuel conditions based on HITEMP 2010 database
Tanin Kangwanpongpan et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2012)
Oxy-fuel combustion of pulverized coal: Characterization, fundamentals, stabilization and CFD modeling
Lei Chen et al.
PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2012)
Modeling of turbulent dilute spray combustion
Patrick Jenny et al.
PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2012)
Chemistry and radiation in oxy-fuel combustion: A computational fluid dynamics modeling study
Chungen Yin et al.
FUEL (2011)
Experiment-based investigations of magnesium dust explosion characteristics
Niansheng Kuai et al.
JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2011)
Characterization and prediction of biomass pyrolysis products
Daniel Neves et al.
PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2011)
Turbulent Dispersed Multiphase Flow
S. Balachandar et al.
ANNUAL REVIEW OF FLUID MECHANICS (2010)
Co-firing straw with coal in a swirl-stabilized dual-feed burner: Modelling and experimental validation
Chungen Yin et al.
BIORESOURCE TECHNOLOGY (2010)
Effectiveness of dust dispersion in the 20-L Siwek chamber
Omotayo Kalejaiye et al.
JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2010)
HITEMP, the high-temperature molecular spectroscopic database
L. S. Rothman et al.
JOURNAL OF QUANTITATIVE SPECTROSCOPY & RADIATIVE TRANSFER (2010)
Dust explosion causation, prevention and mitigation: An overview
Paul R. Amyotte et al.
JOURNAL OF CHEMICAL HEALTH & SAFETY (2010)
Biomass pyrolysis: Kinetic modelling and experimental validation under high temperature and flash heating rate conditions
Capucine Dupont et al.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2009)
Application of inherent safety principles to dust explosion prevention and mitigation
Paul R. Amyotte et al.
PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2009)
Comparison of different global reaction mechanisms for mild combustion of natural gas
Ju Pyo Kim et al.
COMBUSTION SCIENCE AND TECHNOLOGY (2008)
Comprehensive study of Biomass particle combustion
Hong Lu et al.
ENERGY & FUELS (2008)
Modeling chemical and physical processes of wood and biomass pyrolysis
Colomba Di Blasi
PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2008)
Modelling the combustion of pulverized biomass in an industrial combustion test furnace
L. Ma et al.
FUEL (2007)
Influence of the size distribution and concentration on wood dust explosion:: Experiments and reaction modelling
S Callé et al.
POWDER TECHNOLOGY (2005)
Simulating dust explosions with the first version of DESC
T Skjold et al.
PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2005)
Estimating the higher heating value of biomass fuels from basic analysis data
CD Sheng et al.
BIOMASS & BIOENERGY (2005)
Mechanisms for particle transfer and segregation in a turbulent boundary layer
C Marchioli et al.
JOURNAL OF FLUID MECHANICS (2002)
Modeling biomass devolatilization using the chemical percolation devolatilization model for the main components
CD Sheng et al.
PROCEEDINGS OF THE COMBUSTION INSTITUTE (2002)
On the transient flow in the 20-liter explosion sphere
AE Dahoe et al.
JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2001)
Flammability limit measurements for dusts in 20-L and 1-m3 vessels
JE Going et al.
JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2000)
Share Paper
