4.6 Article

Oxidation of ethyl methyl ether: Jet-stirred reactor experiments and kinetic modeling

Related references

Note: Only part of the references are listed.
Article Thermodynamics

An experimental and kinetic modeling study of the auto-ignition of natural gas blends containing C1-C7 alkanes

A. Abd El-Sabor Mohamed et al.

Summary: Experimental measurements were conducted to investigate the ignition delay time of multi-component natural gas mixtures. Results showed that adding heavier hydrocarbons to the mixture significantly increased reactivity and exhibited two-stage ignition behavior. Sensitivity analyses were performed to identify key reactions controlling the ignition behavior of the blends.

PROCEEDINGS OF THE COMBUSTION INSTITUTE (2021)

Article Thermodynamics

A pyrolysis study on C4-C8 symmetric ethers

Zeynep Serinyel et al.

Summary: Pyrolysis of different ethers at high temperatures produced common products such as CO, CH4, H2, and C2H4, with important hydrogen abstraction reactions by H atoms and CH3 radicals. Further systematic studies are needed to determine specific rate constants of important fuel related reactions of ethers.

PROCEEDINGS OF THE COMBUSTION INSTITUTE (2021)

Article Thermodynamics

Oxidation of di-n-propyl ether: Characterization of low-temperature products

Nesrine Belhadj et al.

Summary: The oxidation of di-n-propyl-ether was investigated under different pressure and concentration conditions, using various analytical techniques to study the formation mechanisms and reaction pathways of stable species. The results provide insights for further research on the reaction kinetics and newly detected species formation.

PROCEEDINGS OF THE COMBUSTION INSTITUTE (2021)

Review Energy & Fuels

Higher Alcohol and Ether Biofuels for Compression-Ignition Engine Application: A Review with Emphasis on Combustion Kinetics

Liming Cai et al.

Summary: High molecular weight alcohol and ether fuels, with their advanced autoignition propensities and oxygenated molecular structures, show promise as future fuel candidates for compression-ignition engine applications to enhance combustion efficiencies and reduce pollutant emissions. Produced from lignocellulosic biomass as second-generation biofuels, they offer better CO2 balance and avoid adverse impacts on food supply compared to first-generation biofuel production. Research on their fundamental combustion kinetics and practical applications is crucial for their potential as renewable fuels.

ENERGY & FUELS (2021)

Article Thermodynamics

Chemical insights into the multi-regime low-temperature oxidation of di-n-propyl ether: Jet-stirred reactor experiments and kinetic modeling

Xuefeng Fan et al.

Summary: The oxidation of di-n-propyl ether (DPE) was studied in a jet-stirred reactor combined with a photoionization molecular-beam mass spectrometer to understand the combustion characteristics and reaction pathways. A new kinetic model was developed based on experimental data, revealing two negative temperature coefficient zones and discussing the general requirements for double-NTC behavior. Key fuel-specific species were detected, with the formation pathways elucidated through rate of-production analyses. Propanal was identified as a significant intermediate, with acetic acid and propionic acid present in high concentrations. A new formation pathway for propionic acid was proposed and integrated into the kinetic model for improved prediction accuracy.

COMBUSTION AND FLAME (2021)

Article Thermodynamics

Towards predictive combustion kinetic models: Progress in model analysis and informative experiments

Bin Yang

Summary: The accurate and robust kinetic models are crucial in combustion chemistry research. Reliable experimental data and advanced diagnostic techniques play essential roles in model development. New strategies like ASSM and ANN-HDMR can reduce model dimensionality and computational cost significantly, while global-sensitivity based experimental design methods can guide kinetics-information-enriched data generation. The computational framework OptEx provides a new means for integrating experimental data with mechanism development, design, and optimization to develop reliable kinetic models more efficiently and effectively.

PROCEEDINGS OF THE COMBUSTION INSTITUTE (2021)

Review Energy & Fuels

Review of the Influence of Oxygenated Additives on the Combustion Chemistry of Hydrocarbons

Bin Yang et al.

Summary: This review summarizes the chemical impact of oxygenated additives on the combustion chemistry of hydrocarbons. It was found that at high temperatures, the combustion chemistry of oxygenate/hydrocarbon can be accurately modeled, while at low temperatures, the chemistry is more complex due to fuel-specific reactivity.

ENERGY & FUELS (2021)

Article Energy & Fuels

Pyrolysis of Lignocellulosic Biofuel Di-n-butyl Ether (DBE): Flow Reactor Experiments and Kinetic Modeling

Xuefeng Fan et al.

Summary: Di-n-butyl ether (DBE) is considered a promising biofuel and fuel additive, and its pyrolysis kinetics were studied through flow reactor experiments. The most important reactions during DBE pyrolysis are H-abstraction and four-center elimination, leading to the production of various intermediates and products. The presence of ether functional group and H atom play significant roles in determining the reaction pathways.

ENERGY & FUELS (2021)

Article Energy & Fuels

Detailed Chemical Kinetic Study of Acetaldehyde Oxidation and Its Interaction with NOx

Krishna Prasad Shrestha et al.

Summary: This study investigates the oxidation kinetics of acetaldehyde and its interaction with NOx through detailed modeling and experimental research. The proposed kinetic model accurately predicts experimental trends and reveals that doping NO in acetaldehyde can enhance its reactivity under certain conditions.

ENERGY & FUELS (2021)

Review Thermodynamics

Influence of functional groups on low-temperature combustion chemistry of biofuels

Brandon Rotavera et al.

Summary: Ongoing progress in synthetic biology, metabolic engineering, and catalysis has led to the production of diverse advanced biofuels. Understanding the connections between molecular structure and ignition at low temperatures remains a key priority addressed through chemical kinetics modeling. The review highlights the importance of functional groups in influencing chain reactions and the need for further research to address fundamental questions in biofuel ignition.

PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2021)

Article Energy & Fuels

A high pressure oxidation study of di-n-propyl ether

Zeynep Serinyel et al.

Article Thermodynamics

Low-temperature gas-phase oxidation of diethyl ether: Fuel reactivity and fuel-specific products

Luc-Sy Tran et al.

PROCEEDINGS OF THE COMBUSTION INSTITUTE (2019)

Article Thermodynamics

Analysis of acetic acid gas phase reactivity: Rate constant estimation and kinetic simulations

Carlo Cavallotti et al.

PROCEEDINGS OF THE COMBUSTION INSTITUTE (2019)

Review Thermodynamics

Impact of fuel molecular structure on auto-ignition behavior Design rules for future high performance gasolines

Michael D. Boot et al.

PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2017)

Article Thermodynamics

A chemical kinetic study of the oxidation of dibutyl-ether in a jet-stirred reactor

Sebastien Thion et al.

COMBUSTION AND FLAME (2017)

Article Computer Science, Interdisciplinary Applications

Reaction Mechanism Generator: Automatic construction of chemical kinetic mechanisms

Connie W. Gao et al.

COMPUTER PHYSICS COMMUNICATIONS (2016)

Article Thermodynamics

New reaction classes in the kinetic modeling of low temperature oxidation of n-alkanes

Eliseo Ranzi et al.

COMBUSTION AND FLAME (2015)

Article Chemistry, Physical

Experimental and Modeling Investigation of the Low-Temperature Oxidation of Dimethyl Ether

Anne Rodriguez et al.

JOURNAL OF PHYSICAL CHEMISTRY A (2015)

Review Thermodynamics

Advances and challenges in laminar flame experiments and implications for combustion chemistry

F. N. Egolfopoulos et al.

PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2014)

Article Chemistry, Physical

Natural triple excitations in local coupled cluster calculations with pair natural orbitals

Christoph Riplinger et al.

JOURNAL OF CHEMICAL PHYSICS (2013)

Article Chemistry, Physical

An efficient and near linear scaling pair natural orbital based local coupled cluster method

Christoph Riplinger et al.

JOURNAL OF CHEMICAL PHYSICS (2013)

Article Chemistry, Multidisciplinary

New Pathways for Formation of Acids and Carbonyl Products in Low-Temperature Oxidation: The Korcek Decomposition of γ-Ketohydroperoxides

Amrit Jalan et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2013)

Review Thermodynamics

Combustion chemistry probed by synchrotron VUV photoionization mass spectrometry

Fei Qi

PROCEEDINGS OF THE COMBUSTION INSTITUTE (2013)

Article Thermodynamics

Comprehensive chemical kinetic modeling of the oxidation of 2-methylalkanes from C7 to C20

S. M. Sarathy et al.

COMBUSTION AND FLAME (2011)

Article Chemistry, Physical

Detailed product analysis during the low temperature oxidation of n-butane

Olivier Herbinet et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2011)

Review Thermodynamics

Kinetics of elementary reactions in low-temperature autoignition chemistry

Judit Zador et al.

PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2011)

Article Thermodynamics

Shock-tube and modeling study of ethyl methyl ether pyrolysis and oxidation

Kenji Yasunaga et al.

PROCEEDINGS OF THE COMBUSTION INSTITUTE (2007)

Article Thermodynamics

A comprehensive modeling study of iso-octane oxidation

HJ Curran et al.

COMBUSTION AND FLAME (2002)