4.7 Article

Functionalized Natural Tannins For Preparation of a novel non-isocyanate polyurea-based adhesive

Related references

Note: Only part of the references are listed.
Article Polymer Science

High strength and flame retardant soybean polysaccharide-based wood adhesive produced by borate chemistry and crosslinking strategy

Ying Zhou et al.

Summary: This study successfully developed an adhesive made from renewable polysaccharide materials, which showed excellent bonding strength and water resistance, meeting the requirements for indoor plates.

EUROPEAN POLYMER JOURNAL (2022)

Article Biochemistry & Molecular Biology

Preparation of glycidyl methacrylate grafted starch adhesive to apply in high-performance and environment-friendly plywood

Xiaojian Chen et al.

Summary: In this study, cassava starch was used to prepare environmentally friendly and high-performance starch-based adhesives. The grafting and cross-linking reactions improved the hydrophobicity and wet shear strength of the adhesive. Plywood made with the modified starch adhesive showed better mechanical properties and performance.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2022)

Article Forestry

Characterization on the Copolymerization Resin between Bayberry (Myrica rubra) Tannin and Pre-Polymers of Conventional Urea-Formaldehyde Resin

Jinda Peng et al.

Summary: This research focuses on overcoming the disadvantages of weak water resistance and high formaldehyde emission of urea-formaldehyde resin (UF) by partially substituting urea with tannin. Plasma pretreatment of wood is introduced to enhance the bonding performance of plywood. The results show that tannin-urea-formaldehyde resin (TUF) has improved water resistance and reduced formaldehyde emission.

FORESTS (2022)

Article Polymer Science

A Study of Concept to Prepare Totally Biosourced Wood Adhesives from Only Soy Protein and Tannin

Saman Ghahri et al.

Summary: This study examines the initial application of wood adhesives sourced entirely from soy protein isolate (SPI) and a commercial flavonoid tannin. The adhesive is non-toxic and composed solely of these two biomaterials. The researchers found that pre-reaction between SPI and tannin at a temperature of 40 degrees C resulted in the best plywood bonding results. However, higher temperature pre-reactions led to premature cross-linking and loss of further bonding activity. The adhesive was analyzed using various methods and showed promise for further reinforcement using soy resins developed by other research groups.

POLYMERS (2022)

Article Chemistry, Multidisciplinary

Highly Branched Polyurea-Based Resins: Clean Synthesis and Wood Bonding Performance

Shuyang Jiang et al.

Summary: The development of green and safe adhesives with high performance is crucial for the sustainability of the wood industry. In this study, highly branched polyureas (HBPUs) were synthesized and used as formaldehyde-free wood adhesives, demonstrating good bonding performance. Additionally, HBPU-formaldehyde (HBPUF) resins were synthesized and showed better bonding performance and lower formaldehyde emission levels compared to conventional urea-formaldehyde (UF) resin.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2022)

Article Green & Sustainable Science & Technology

Covalent and Ionic Bonding between Tannin and Collagen in Leather Making and Shrinking: A MALDI-ToF Study

Antonio Pizzi

Summary: Collagen powder hydrolysates were reacted with commercial mimosa bark tannin extract, forming a series of covalent and ionic linkages. The proportion of covalent linkages increased significantly with higher temperatures. This tightening of the covalent network may have important implications for the wear resistance and performance of leather.

JOURNAL OF RENEWABLE MATERIALS (2021)

Article Chemistry, Multidisciplinary

Polyphenol-Mediated Assembly of Proteins for Engineering Functional Materials

Yiyuan Han et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Article Green & Sustainable Science & Technology

Multiple crosslinking strategy to achieve high bonding strength and antibacterial properties of double-network soy adhesive

Shicun Jin et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Review Polymer Science

Wood Composites and Their Polymer Binders

Antonio Pizzi et al.

POLYMERS (2020)

Article Chemistry, Multidisciplinary

Novel Highly Branched Polymer Wood Adhesive Resin

Taohong Li et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2020)

Article Chemistry, Multidisciplinary

Strong, Reusable, and Self-Healing Lignin-Containing Polyurea Adhesives

Weifeng Liu et al.

CHEMSUSCHEM (2020)

Article Nanoscience & Nanotechnology

Core-Shell Nanohybrid Elastomer Based on Co-Deposition Strategy to Improve Performance of Soy Protein Adhesive

Shujun Zhao et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Review Chemistry, Multidisciplinary

Research status, industrial application demand and prospects of phenolic resin

Yanru Xu et al.

RSC ADVANCES (2019)

Article Green & Sustainable Science & Technology

Strong Adhesives from Corn Protein and Tannic Acid

Gudrun Schmidt et al.

ADVANCED SUSTAINABLE SYSTEMS (2019)

Review Engineering, Environmental

Structural Properties and Copolycondensation Mechanism of Valonea Tannin-Modified Phenol-formaldehyde Resin

Cheng Li et al.

JOURNAL OF POLYMERS AND THE ENVIRONMENT (2018)

Article Chemistry, Applied

Interaction mechanisms of condensed tannins (proanthocyanidins) with wheat gluten proteins

Audrey L. Girard et al.

FOOD CHEMISTRY (2018)

Article Chemistry, Applied

Polyurea spray coatings: Tailoring material properties through chemical crosslinking

N. Iqbal et al.

PROGRESS IN ORGANIC COATINGS (2018)

Article Materials Science, Multidisciplinary

Study on Cooling Effect and Pavement Performance of Thermal-Resistant Asphalt Mixture

Jiarong Wang et al.

ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2018)

Article Agricultural Engineering

MALDI-TOF, 13C NMR and FT-MIR analysis and strength characterization of glycidyl ether tannin epoxy resins

S. Jahanshahi et al.

INDUSTRIAL CROPS AND PRODUCTS (2016)

Article Engineering, Chemical

Preparation and characterization of a novel environmentally friendly phenol-formaldehyde adhesive modified with tannin and urea

Cheng Li et al.

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2016)

Article Chemistry, Multidisciplinary

Induced Tannin Adhesive by Boric Acid Addition and Its Effect on Bonding Quality and Biological Performance of Poplar Plywood

Davood Efhamisisi et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2016)

Review Chemistry, Multidisciplinary

Chemical modification of tannins to elaborate aromatic biobased macromolecular architectures

Alice Arbenz et al.

GREEN CHEMISTRY (2015)

Article Agricultural Engineering

Reaction of condensed tannins with ammonia

F. Braghiroli et al.

INDUSTRIAL CROPS AND PRODUCTS (2013)

Article Engineering, Chemical

Phenolic resin adhesives based on chestnut (Castanea sativa) hydrolysable tannins

S. Spina et al.

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2013)

Review Chemistry, Multidisciplinary

Plant Polyphenols: Chemical Properties, Biological Activities, and Synthesis

Stephane Quideau et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2011)

Proceedings Paper Materials Science, Composites

Effect of Dry-wet Circulation and Temperature Change on Properties of Polyurea Coatings

Ping Lv et al.

ADVANCES IN COMPOSITES, PTS 1 AND 2 (2011)