Related references
Note: Only part of the references are listed.Hierarchical core-shell TiO2@LDH@Ni(OH)2 architecture with regularly-oriented nanocatalyst shells: Towards improving the mechanical performance, flame retardancy and toxic smoke suppression of unsaturated polyester resin
Fukai Chu et al.
CHEMICAL ENGINEERING JOURNAL (2021)
Nano-hybridized form-stable ester@F-SiO2 phase change materials for melt-spun PA6 fibers engineered towards smart thermal management fabrics
Wei Xia et al.
CHEMICAL ENGINEERING JOURNAL (2021)
Reactive Nano-Fe3O4 compatibilized magnetic super-tough PA1212/POE-g-MAH composites with a filler-network structure
Yuanyuan Wang et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2021)
Flexible thermoplastic polyurethane-carbon nanotube composites for electromagnetic interference shielding and thermal management
Beomsu Shin et al.
CHEMICAL ENGINEERING JOURNAL (2021)
Green-plasticized poly(lactic acid)/nanofibrillated cellulose biocomposites with high strength, good toughness and excellent heat resistance
Linqiong Xu et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2021)
Synergy of electrochemical grafting and crosslinkable crystalline sizing agent to enhance the interfacial strength of carbon fiber/PEEK composites
Shengdao Wang et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2021)
An effective strategy for improving the interface adhesion of the immiscible methyl vinyl silicone elastomer/thermoplastic polyurethane blends via developing a hybrid janus particle with amphiphilic brush
Jing Hu et al.
POLYMER (2021)
Mechanical and thermal properties of PEEK composites by incorporating inorganic particles modified phosphates
Yongan Niu et al.
COMPOSITES PART B-ENGINEERING (2021)
Scalable manufacturing of flexible, durable Ti3C2Tx MXene/Polyvinylidene fluoride film for multifunctional electromagnetic interference shielding and electro/photo-thermal conversion applications
Yanli Li et al.
COMPOSITES PART B-ENGINEERING (2021)
Low concentration of inorganic fullerene tungsten sulfide nanofiller to achieve cost-effective and significant enhancement on thermal and dynamic mechanical properties of perfluoroalkoxy nanocomposites
Ding Chen et al.
POLYMER COMPOSITES (2021)
Deposition growth of Zr-based MOFs on cerium phenylphosphonate lamella towards enhanced thermal stability and fire safety of polycarbonate
Ting Sai et al.
COMPOSITES PART B-ENGINEERING (2020)
Fabrication of very effective ferroferric oxide and multiwalled carbon nanotubes@polyetherimide/poly(ether ether ketone) electromagnetic interference shielding composites
Botao Jiang et al.
POLYMER COMPOSITES (2020)
Thermal behavior study and degradation mechanism by TG/MS/FTIR technique of some poly(aryl ether ether ketone)s
Corneliu Hamciuc et al.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2020)
Electrochemical exfoliation and functionalization of black phosphorene to enhance mechanical properties and flame retardancy of waterborne polyurethane
Lingxin He et al.
COMPOSITES PART B-ENGINEERING (2020)
One-pot solvothermal synthesis of silane-functionalized carbon nanodots as compatibilizers for the immiscible TPU/MVQ blends
Naiqun Yao et al.
APPLIED SURFACE SCIENCE (2020)
Synergistic effect of graphene nanoplate and carbonized loofah fiber on the electromagnetic shielding effectiveness of PEEK-based composites
Songtao Li et al.
CARBON (2019)
Synergistic effect of graphene/multiwalled carbon nanotube hybrid fillers on mechanical, electrical and EMI shielding properties of polycarbonate/ethylene methyl acrylate nanocomposites
Nisha Bagotia et al.
COMPOSITES PART B-ENGINEERING (2019)
Mechanical properties, rheological behaviors, and phase morphologies of high-toughness PLA/PBAT blends by in-situ reactive compatibilization
Xin Wang et al.
COMPOSITES PART B-ENGINEERING (2019)
Structural stabilizing effect of SEBSgMAH on a PP-PET blend for multiple mechanical recycling
Karen Van Kets et al.
POLYMER DEGRADATION AND STABILITY (2019)
Anisotropic Thermally Conductive Perfluoroalkoxy Composite with Low Dielectric Constant Fabricated by Aligning Boron Nitride Nanosheets via Hot Pressing
Xinru Zhang et al.
POLYMERS (2019)
Prediction of electrical conductivity, double percolation limit and electromagnetic interference shielding effectiveness of copper nanowire filled flexible polymer blend nanocomposites
Revathy Ravindren et al.
COMPOSITES PART B-ENGINEERING (2019)
Perfluoroalkoxy (PFA)-α-Alumina Composites: Effect of Environment on Tribological Performance
Mark A. Sidebottom et al.
TRIBOLOGY LETTERS (2019)
Evaluation of the thermal, mechanical and dynamic mechanical characteristics of modified graphite nanoplatelets and graphene oxide high-density polyethylene composites
Sean Lin et al.
COMPOSITES PART B-ENGINEERING (2018)
Light weight and flexible poly(ether ether ketone) based composite film with excellent thermal stability and mechanical properties for wide-band electromagnetic interference shielding
Ruiqi Na et al.
RSC ADVANCES (2018)
Preparation of Graphene-Perfluoroalkoxy Composite and Thermal and Mechanical Properties
Wanlong Zhang et al.
POLYMERS (2018)
Manipulation of thermo-mechanical, morphological and electrical properties of PP/PET polymer blend using MWCNT as nano compatibilizer: A comprehensive study of hybrid nanocomposites
Raghvendra Kumar Mishra et al.
VACUUM (2018)
Wear-Induced Microstructural and Chemical Changes in Poly[tetrafluoroethylene-co-(perfluoroalkyl vinyl ether)] (PFA)
Mark A. Sidebottom et al.
MACROMOLECULES (2018)
Flexible perfluoroalkoxy films filled with carbon nanotubes and their electric heating property
Xing Meng et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2017)
Fire hazard reduction of hollow glass microspheres in thermoplastic polyurethane composites
Chuanmei Jiao et al.
JOURNAL OF HAZARDOUS MATERIALS (2017)
Novel graphitic carbon coated IF-WS2 reinforced poly(ether ether ketone) nanocomposites
Nannan Wang et al.
RSC ADVANCES (2017)
Interface and properties of inorganic fullerene tungsten sulphide nanoparticle reinforced poly (ether ether ketone) nanocomposites
Nannan Wang et al.
RESULTS IN PHYSICS (2017)
Enhancing thermal conductivity and mechanical properties of poly (methyl methacrylate) via adding expanded graphite and injecting water
Min Wu et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2017)
Promoting compatibilization effect of graphene oxide on immiscible PS/PVDF blend via water-assisted mixing extrusion
Jun Tong et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2017)
Studies on Synthesis of Electrochemically Exfoliated Functionalized Graphene and Polylactic Acid/Ferric Phytate Functionalized Graphene Nanocomposites as New Fire Hazard Suppression Materials
Xiaming Feng et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
Enhancing the Mechanical Properties of Biodegradable Polymer Blends Using Tubular Nanoparticle Stitching of the Interfaces
Yichen Guo et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
Reinforcement of organo-modified molybdenum disulfide nanosheets on the mechanical and thermal properties of polyurethane acrylate films
Xiaming Feng et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2016)
Integrated effect of supramolecular self-assembled sandwich-like melamine cyanurate/MoS2 hybrid sheets on reducing fire hazards of polyamide 6 composites
Xiaming Feng et al.
JOURNAL OF HAZARDOUS MATERIALS (2016)
Significance of Epoxy Network Properties for the Toughening Effect of Flaky and Fullerene-Like WS2 Nanoparticles
Dietmar Haba et al.
JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS (2016)
Ultralow wear Perfluoroalkoxy (PFA) and alumina composites
Mark A. Sidebottom et al.
WEAR (2016)
High-Performance Poly(ethylene oxide)/Molybdenum Disulfide Nanocomposite Films: Reinforcement of Properties Based on the Gradient Interface Effect
Xiaming Feng et al.
ACS APPLIED MATERIALS & INTERFACES (2015)
Nano-TiO2 Reinforced PEEK/PEI Blends as Biomaterials for Load-Bearing Implant Applications
Ana M. Diez-Pascual et al.
ACS APPLIED MATERIALS & INTERFACES (2015)
Fluoropolymer composite coating for condensing heat exchangers: Characterization of the mechanical, tribological and thermal properties
Youliang He et al.
APPLIED THERMAL ENGINEERING (2015)
Reinforcement in melt-processed polymer-graphene composites at extremely low graphene loading level
Oana M. Istrate et al.
CARBON (2014)
Synthesis and characterizations of modified expanded graphite/emulsion styrene butadiene rubber nanocomposites: Mechanical, dynamic mechanical and morphological properties
Asish Malas et al.
COMPOSITES PART B-ENGINEERING (2014)
Liquid-exfoliated MoS2 by chitosan and enhanced mechanical and thermal properties of chitosan/MoS2 composites
Xiaming Feng et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2014)
Poly(3-hydroxybutyrate)/ZnO Bionanocomposites with Improved Mechanical, Barrier and Antibacterial Properties
Ana M. Diez-Pascual et al.
INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2014)
Smoke suppression properties of ferrite yellow on flame retardant thermoplastic polyurethane based on ammonium polyphosphate
Xilei Chen et al.
JOURNAL OF HAZARDOUS MATERIALS (2014)
Ultra-toughened nylon 12 nanocomposites reinforced with IF-WS2
Fang Xu et al.
NANOTECHNOLOGY (2014)
In situ synthesis of a MoS2/CoOOH hybrid by a facile wet chemical method and the catalytic oxidation of CO in epoxy resin during decomposition
Xiaming Feng et al.
JOURNAL OF MATERIALS CHEMISTRY A (2014)
Effect of Nanoclay Loading on the Thermal and Mechanical Properties of Biodegradable Polylactide/Poly[(butylene succinate)-co-adipate] Blend Composites
Vincent Ojijo et al.
ACS APPLIED MATERIALS & INTERFACES (2012)
Characterization of Fluoropolymer Nanofiber Sheets Fabricated by CO2 Laser Drawing without Solvents
Kei Fukuhara et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2012)
Classification of New Melt-Processable PTFE: Comparison of Emulsion- and Suspension-Polymerized Materials
Achim Frick et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2012)
Contributions to the thermal degradation mechanism under nitrogen atmosphere of PTFE by TG-FTIR analysis. Influence of the additive nature
Lucia Odochian et al.
THERMOCHIMICA ACTA (2011)
Synthesis and Characterization of Poly(ether ether ketone) Derivatives Obtained by Carbonyl Reduction
Ana M. Diez-Pascual et al.
MACROMOLECULES (2009)
Microstructures and tribological properties of PEEK-based nanocomposite coatings incorporating inorganic fullerene-like nanoparticles
Xianghui Hou et al.
SURFACE & COATINGS TECHNOLOGY (2008)
Surface modification of fluorocarbon polymer films for improved adhesion using atmospheric-pressure nonthermal plasma graft-polymerization
Masaaki Okubo et al.
THIN SOLID FILMS (2008)
Shock-absorbing and failure mechanisms of WS2 and MoS2 nanoparticles with fullerene-like structures under shock wave pressure
YQ Zhu et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2005)
WS2 and MoS2 inorganic fullerenes -: Super shock absorbers at very high pressures
YQ Zhu et al.
ADVANCED MATERIALS (2005)
Cross-linking of PFA by electron beam irradiation
TR Dargaville et al.
MACROMOLECULES (2003)
Templating organic semiconductors via self-assembly of polymer colloids
R Mezzenga et al.
SCIENCE (2003)
Shock-wave resistance of WS2 nanotubes
YQ Zhu et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2003)
Share Paper
