4.7 Article

Mechanical and thermal performances of styrene butadiene rubber nanocomposites with boron nitride nanosheets, carbon nanotubes, and the hybrid filler system

Related references

Note: Only part of the references are listed.
Article Materials Science, Composites

Investigations on effectiveness of transfer layer on specific wear rate and coefficient of friction during dry sliding of hybrid polymer matrix composites

Kalaiselvan Subramanian et al.

Summary: The research analyzed the impact of transfer layer in polymer-based composites and the performance improvement of hybrid composites in dry sliding. The results showed that hybrid composites exhibited better hardness, tensile, and flexural properties compared to pure epoxy, and demonstrated superior performance in wear tests.

POLYMER COMPOSITES (2022)

Article Polymer Science

Mono-filler and bi-filler composites based on thermoplastic polyurethane, carbon fibers and carbon nanotubes with improved physicomechanical and engineering properties

Arman Farzaneh et al.

Summary: Two types of carbon-based fillers, multi-walled carbon nanotubes and carbon fibers, were added to thermoplastic polyurethane to prepare mono-filler and bi-filler composites. The bi-filler composites showed better microphase separation compared to their mono-filler counterparts, as confirmed by ATR-FTIR results.

POLYMER INTERNATIONAL (2022)

Article Materials Science, Composites

Analytical modeling and experimentally optimizing synergistic effect on thermal conductivity enhancement of polyurethane nanocomposites with hybrid carbon nanofillers

Amir Navidfar et al.

Summary: Combining carbon nanofillers of different dimensions can synergistically enhance thermal conductivity. The optimization of hybrid nanofillers containing MWCNTs and GNPs was studied to enhance thermal conductivity. A synergistic thermal conductivity improvement was confirmed at low nanofillers contents, showing that the TC of hybrid nanocomposite at 0.25 wt% is approximately equivalent to the TC of individual nanofillers at 0.75 wt%.

POLYMER COMPOSITES (2021)

Article Materials Science, Characterization & Testing

Influences of carbon nanotubes and graphite hybrid filler on properties of natural rubber nanocomposites

Wasuthon Kitisavetjit et al.

Summary: The incorporation of CNT/GP hybrid filler in NR matrix improved relaxation modulus, bound rubber, and thermal stability of the nanocomposites. A combination of 3 phr CNT and 30 ph GP gave superior properties to NR vulcanizates, providing further significant improvements in electrical conductivity and dielectric constant of the nanocomposites. The NR nanocomposites with high conductivity and low dielectric constant are suitable for use in many electrical devices.

POLYMER TESTING (2021)

Article Engineering, Chemical

The Effect of Silica Nanofiller on the Physical and Thermal Characteristics of Rubber-Based Composites

A. Chelli et al.

Summary: This paper studied the mechanical and thermal characteristics of NR and NBR rubber blends reinforced with nano silica. In most cases, increasing the percentage of NBR and the presence of nano silica enhanced hardness and toughness, but reduced tensile strength, tear strength and elongation at break. Nano silica was found to have a catalytic effect on the mixture, while NBR had a catalytic effect on the decomposition of NR.

INTERNATIONAL POLYMER PROCESSING (2021)

Article Materials Science, Composites

Hybridization as an efficient strategy for enhancing the performance of polymer nanocomposites

Ali Tajdari et al.

Summary: This study aimed to compare the effects of different modes of metal oxide addition on the properties of poly(lactic acid) (PLA), synthesizing zinc oxide nanorods and hybrid nanoparticles and incorporating them into PLA matrices. The results showed that proper dispersion and lowest aggregation were achieved with the TZO nano-hybrid, leading to improved physical, mechanical, and antibacterial properties of PLA. This novel nanocomposite film has potential applications in the packaging industry.

POLYMER COMPOSITES (2021)

Article Materials Science, Composites

The impact of organo-montmorillonite on rheology and crystalline structure of uncured and cured acrylonitrile-butadiene rubber/poly(ethylene-co-vinyl acetate) nanocomposites

Mohammad Razavi-Nouri et al.

Summary: The study shows that the addition of OMMT significantly influences the properties of uncured and cured nanocomposites. Curing enhances the exfoliation of high OMMT content materials and improves hardness, tensile strength, and other indicators. Additionally, at a constant OMMT content, the impact of nanofillers on uncured materials is more significant than on cured materials.

POLYMER COMPOSITES (2021)

Article Materials Science, Composites

Novel natural rubber composites based on silver nanoparticles and carbon nanotubes hybrid filler

Apinya Krainoi et al.

POLYMER COMPOSITES (2020)

Article Chemistry, Multidisciplinary

Strengthened, Self-Healing, and Conductive ENR-Based Composites Based on Multiple Hydrogen Bonding Interactions

Jiada Nie et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2020)

Review Chemistry, Multidisciplinary

Mechanisms of mechanical reinforcement by graphene and carbon nanotubes in polymer nanocomposites

Dimitrios G. Papageorgiou et al.

NANOSCALE (2020)

Article Engineering, Chemical

Mechanical Properties and Mullins Effect in Natural Rubber Reinforced by Grafted Carbon Black

Wen Fu et al.

ADVANCES IN POLYMER TECHNOLOGY (2019)

Review Engineering, Electrical & Electronic

Carbon nanotubes and its gas-sensing applications: A review

Tao Han et al.

SENSORS AND ACTUATORS A-PHYSICAL (2019)

Article Materials Science, Multidisciplinary

Fabrication of β-cyclodextrin-crosslinked epoxy polybutadiene/hydroxylated boron nitride nanocomposites with improved mechanical and thermal-conducting properties

Yinxin Yang et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)

Article Chemistry, Physical

Strengthened, recyclable shape memory rubber films with a rigid filler nano-capillary network

Wenchao Wu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Article Materials Science, Multidisciplinary

Fracture toughness of soft materials with rate-independent hysteresis

Yuan Qi et al.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2018)

Article Polymer Science

Studies of nanocomposites based on carbon nanomaterials and RTV silicone rubber

Vineet Kumar et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2017)

Article Engineering, Manufacturing

Thermal conductivity and thermo-physical properties of nanodiamond-attached exfoliated hexagonal boron nitride/epoxy nanocomposites for microelectronics

Yinhang Zhang et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2017)

Article Engineering, Multidisciplinary

Functionalised graphene-multiwalled carbon nanotube hybrid poly(styrene-b-butadiene-b-styrene) nanocomposites

Qi Chau Tan et al.

COMPOSITES PART B-ENGINEERING (2016)

Article Materials Science, Composites

The effect of surface functionalization of carbon nanotubes on properties of natural rubber/carbon nanotube composites

Yeampon Nakaramontri et al.

POLYMER COMPOSITES (2015)

Review Chemistry, Multidisciplinary

Composite Titanium Dioxide Nanomaterials

Michael Dahl et al.

CHEMICAL REVIEWS (2014)

Article Materials Science, Multidisciplinary

The Role of CNTs in Promoting Hybrid Filler Networking and Synergism with Carbon Black in the Mechanical Behavior of Filled Polyisoprene

Maurizio Galimberti et al.

MACROMOLECULAR MATERIALS AND ENGINEERING (2013)

Article Chemistry, Multidisciplinary

Thermal Conductivity and Phonon Transport in Suspended Few-Layer Hexagonal Boron Nitride

Insun Jo et al.

NANO LETTERS (2013)

Article Polymer Science

Natural rubber nanocomposites with functionalized carbon nanotubes: Mechanical, dynamic mechanical, and morphology studies

Adedigba A. Abdullateef et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2012)

Review Polymer Science

Thermal conductivity of carbon nanotubes and their polymer nanocomposites: A review

Zhidong Han et al.

PROGRESS IN POLYMER SCIENCE (2011)

Article Polymer Science

Effect of Carbon Black/Nanoclay Hybrid Filler on the Dynamic Properties of Natural Rubber Vulcanizates

Yuanbo Liu et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2010)

Article Multidisciplinary Sciences

Extraordinary synergy in the mechanical properties of polymer matrix composites reinforced with 2 nanocarbons

K. Eswar Prasad et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2009)

Article Chemistry, Physical

Improving reinforcement of natural rubber by networking of activated carbon nanotubes

Sanjib Bhattacharyya et al.

CARBON (2008)

Article Thermodynamics

Thermal conductivity of graphite/silicone rubber prepared by solution intercalation

Qiuhong Mu et al.

THERMOCHIMICA ACTA (2007)