Related references
Note: Only part of the references are listed.Characterization, Antistatic Treatment and Spinnability of Bio-based Polyamide 5,6 Staple Fibers
Jia-qing Wu et al.
JOURNAL OF MACROMOLECULAR SCIENCE PART B-PHYSICS (2022)
Constructing highly aligned crystalline structure to enhance sliding wear performance of bulk polyamide 6
Jing Chen et al.
POLYMER (2021)
Hydrogen bonding and crystalline structure of bio-based PA56
Tingting Yang et al.
POLYMER (2021)
High-Performance All-Bio-Based Laminates Derived from Delignified Wood
Marion Frey et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2021)
Process-Property Relationships for Melt-Spun Poly(lactic acid) Yarn
Chirag R. Gajjar et al.
ACS OMEGA (2021)
A Fresh Look at the Structures of Nylons and the Brill Transition
Bernard Lotz
ADVANCED FIBER MATERIALS (2021)
Biodegradable Behavior of Waste Wool and Their Recycled Polyester Preforms in Aqueous and Soil Conditions
Sudhakar Muniyasamy et al.
JOURNAL OF RENEWABLE MATERIALS (2021)
Microfibril alignment induced by stretching fields during the dry-jet wet spinning process: Reinforcement on polyacrylonitrile fiber mechanical properties
Quan Gao et al.
POLYMER TESTING (2020)
Synthesis, Properties, and Biodegradation of Sequential Poly(Ester Amide)s Containing γ-Aminobutyric Acid
Yuushou Nakayama et al.
INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2020)
Synthesis, properties, and biodegradability of three-branched copolyamide (4/6)
Norioki Kawasaki et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2020)
The structures and properties of bio-based polyamide 56 fibers prepared by high-speed spinning
Yu Wang et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2020)
Micro and macroscopic mechanical behaviors of high-density polyethylene under UV irradiation and temperature
Hsiang-Chun Hsueh et al.
POLYMER DEGRADATION AND STABILITY (2020)
Microstructural evolution and mechanical investigation of hot stretched graphene oxide reinforced polyacrylonitrile nanofiber yarns
Yuxi Yu et al.
POLYMERS FOR ADVANCED TECHNOLOGIES (2020)
The Thermal Behavior of γ-PA1010: Evolution of Structure and Morphology in the Simultaneous Thermal Stretched Films
Zhenya Zhang et al.
MATERIALS (2020)
Effect of the draw ratio in dry jet-wet spinning on aromatic copolysulfonamide fibers
Jian-Ning Wang et al.
NUCLEAR SCIENCE AND TECHNIQUES (2020)
Electrospinnability of hydrogen bonded supramolecular comb polymers based on Poly(4-vinylpyridine) and 3-pentadecylphenol
Deepika Malpani et al.
POLYMER (2020)
From Microfibrillar Network to Lamellae during the Coagulation Process of Polyacrylonitrile Fiber: Visualization of Intermediate Structure Evolution
Quan Gao et al.
MACROMOLECULES (2020)
Fully bio-based polyesters poly(ethylene-co-1,5-pentylene 2,5-thiophene-dicarboxylate)s (PEPTs) with high toughness: Synthesis, characterization and thermo-mechanical properties
Guoqiang Wang et al.
POLYMER (2020)
Melt-Spun Fibers for Textile Applications
Rudolf Hufenus et al.
MATERIALS (2020)
Stretch-Induced Reverse Brill Transition in Polyamide 46
Minfang An et al.
MACROMOLECULES (2020)
Structural origins of mechanical strengthening in poly(phenylene sulfide)/multiwalled carbon nanotube nanocomposites obtained via hot-stretching
Yunjie Lin et al.
POLYMER COMPOSITES (2019)
Influences of diffusion coefficient of 1-allyl-3-methylimidazolium chloride on structure and properties of regenerated cellulose fiber obtained via dry-jet-wet spinning
Desheng Zhang et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2019)
Polyamide-6 structuration induced by a chemical reaction with a polyether triamine in the molten state
M. Auclerc et al.
POLYMER (2019)
Biodegradation of mulch films from poly(butylene adipate co-terephthalate), carnauba wax, and sugarcane residue
Thaina Araujo de Oliveira et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2019)
In-situ SAXS/WAXS investigations of the mechanically-induced phase transitions in semi-crystalline polyamides
Julie Pepin et al.
POLYMER (2019)
Rheological and mechanical properties of a novel polyamide 6 synthesized by anionic polymerization of ε-caprolactam in a twin-screw extruder
Hoyeon Kim et al.
POLYMER (2019)
Biodegradation of polyamide 4 in seawater
Naoko Yamano et al.
POLYMER DEGRADATION AND STABILITY (2019)
Blended films containing polybutyrolactam and chitosan for potential wound dressing applications
De Wu et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2018)
Shear and extensional rheology of aqueous suspensions of cellulose nanofibrils for biopolymer-assisted filament spinning
Men J. Lundahl et al.
EUROPEAN POLYMER JOURNAL (2018)
Computational Characterization of Nylon 4, a Biobased and Biodegradable Polyamide Superior to Nylon 6
Yuichiro Fukuda et al.
ACS OMEGA (2018)
Structure and biocompatibility of highly oriented poly(lactic acid) film produced by biaxial solid hot stretching
Zhengqiu Li et al.
JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2017)
Nanofibers prepared by electrospinning from solutions of biobased polyamide 4
Lenka Blazkova et al.
JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY (2017)
Spinnability of Dilute Polymer Solutions
A. Ya. Malkin et al.
MACROMOLECULES (2017)
Biodegradation of polyamide 4 in vivo
Naoko Yamano et al.
POLYMER DEGRADATION AND STABILITY (2017)
Mechanical properties, moisture absorption, and dyeability of polyamide 5,6 fibers
Yassir A. Eltahir et al.
JOURNAL OF THE TEXTILE INSTITUTE (2016)
Polyamide4-block-poly(vinyl acetate) via a polyamide4 azo macromolecular initiator: Thermal and mechanical behavior, biodegradation, and morphology
Norioki Kawasaki et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2015)
Soil burial biodegradation of antimicrobial biodegradable PBAT films
Hao Wang et al.
POLYMER DEGRADATION AND STABILITY (2015)
Synthesis of fully bio-based polyamides with tunable properties by employing itaconic acid
Zhao Wang et al.
POLYMER (2014)
Polyamide 4 with long-chain fatty acid groups - Suppressing the biodegradability of biodegradable polymers
Naoko Yamano et al.
POLYMER DEGRADATION AND STABILITY (2014)
Evaluate on the Alkaline Resistance Properties of Bio-based Nylon 56 Fiber Compared with the normal Nylon Fiber
Yafei Guo et al.
ADVANCES IN TEXTILE ENGINEERING AND MATERIALS IV (2014)
Biodegradability of nylon 4 film in a marine environment
Koichiro Tachibana et al.
POLYMER DEGRADATION AND STABILITY (2013)
Synthesis and biodegradation of poly(2-pyrrolidone-co-ε-caprolactone)s
Atsuyoshi Nakayama et al.
POLYMER DEGRADATION AND STABILITY (2013)
Degradation behaviour of poly(lactic acid) films and fibres in soil under Mediterranean field conditions and laboratory simulations testing
E. Rudnik et al.
INDUSTRIAL CROPS AND PRODUCTS (2011)
Effect of coagulation on the structure and property of PAN nascent fibers during dry jet wet-spinning
Cheng-guo Wang et al.
JOURNAL OF POLYMER RESEARCH (2009)
2-α-hydroxyalkyl- and 2,7-di(α-hydroxyalkyl)-1,8-bis(dimethylamino)naphthalenes:: Stabilization of nonconventional in/out conformers of proton sponges via N...H-O intramolecular hydrogen bonding.: A remarkable kind of tandem nitrogen inversion
Alexander F. Pozharskii et al.
JOURNAL OF ORGANIC CHEMISTRY (2007)
Share Paper
