4.7 Article

Mesoscopic modeling of vapor cavitation bubbles collapse and interaction in near-wall region with a pseudopotential lattice Boltzmann method

Related references

Note: Only part of the references are listed.
Article Computer Science, Interdisciplinary Applications

Non-condensable gas bubble dissolution with a modified tunable surface tension multicomponent lattice Boltzmann model

Xiaolong He et al.

Summary: A modified lattice Boltzmann pseudopotential multicomponent and multiphase model with tunable surface tension is developed and analyzed. The effect of surface tension on bubble dissolution process is investigated, showing that larger surface tension leads to dramatic deformation and smaller equilibrium radius. The convection process on the interface is the dominant factor in the oscillation of the average dissolved gas concentration, which takes longer to reach equilibrium than the bubble radius due to slow diffusion process.

COMPUTERS & FLUIDS (2022)

Review Thermodynamics

Pore-scale modeling of complex transport phenomena in porous media

Li Chen et al.

Summary: This review summarizes the recent advances and challenges in pore-scale modeling, discussing its practical applications in geoscience, polymer exchange membrane fuel cells, and solid oxide fuel cells. Notable results from pore-scale modeling are presented, while the challenges facing the development of pore-scale models are also discussed.

PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2022)

Article Thermodynamics

Role of wall temperature on cavitation bubble collapse near a wall investigated using thermal lattice Boltzmann method

Yu Yang et al.

Summary: The thermal lattice Boltzmann method is used to simulate cavitation bubble collapse in heating or cooling systems. The results are consistent with Laplace's law and temperature solutions derived from the Rayleigh-Plesset equation. The effects of wall temperature on a collapsing bubble are studied, and the influence mechanism of the micro-jet and the cavitation bubble itself on solid-wall heat transfer, as well as the thermodynamic behavior characteristics of the cavitation bubble collapse near the wall, are obtained. The study also introduces a dimensionless temperature parameter to analyze the heat transfer intensity of the model.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2022)

Article Engineering, Marine

Experimental study on the characteristics of microjets and shock waves of cavitation bubbles near elastic boundaries

Yanwei Zhai et al.

Summary: This paper studies the interaction between cavitation bubbles and different elastic boundaries from the perspective of microjets and shock waves. The elastic deformation characteristics of elastic materials under the penetration of microjets are found to be the main influencing factors of cavitation erosion.

OCEAN ENGINEERING (2022)

Article Computer Science, Interdisciplinary Applications

Thermal pseudo-potential lattice Boltzmann method for simulating cavitation bubbles collapse near a rigid boundary

Haonan Peng et al.

Summary: The paper explores the collapse process of cavitation bubbles near a rigid boundary using the double distribution function thermal lattice Boltzmann method. The simulation results show that this method is reliable for studying thermal cavitation bubble dynamics.

COMPUTERS & FLUIDS (2021)

Article Mechanics

Lattice Boltzmann simulation of a water droplet penetrating a micropillar array in a microchannel

Geng Wang et al.

Summary: The study uses a lattice Boltzmann model to simulate the dynamics of water droplets penetrating a micropillar array in a microchannel, validating the model through experiments and conducting a parametric study. It finds that the fingering dynamics of the droplet in the longitudinal direction is governed by the competition between dynamic and capillary pressures, while permeation in the lateral and vertical directions is dominated by the capillary effect. Changing the droplet initial velocity and configuration setup significantly influences the droplet penetration velocity, maximum wetted surface area, and penetration rate.

PHYSICS OF FLUIDS (2021)

Article Mechanics

The acoustic pressure generated by the cavitation bubble expansion and collapse near a rigid wall

Silvestre Roberto Gonzalez-Avila et al.

Summary: In this study, acoustic transients emitted during the collapse of laser-induced cavitation bubbles were analyzed systematically for different standoff parameters. Experimental and numerical results were used to investigate the impact of various parameters on the characteristics of the acoustic signals. It was found that the pressure peaks in the acoustic signals and the amplitude ratio of the first to second acoustic transients are related to the bubble nucleation place and the standoff parameter, gamma.

PHYSICS OF FLUIDS (2021)

Article Mechanics

Stratification effect of air bubble on the shock wave from the collapse of cavitation bubble

Jing Luo et al.

Summary: The study found that the relative distance and size between the cavitation bubble and air bubble play a dominant role in the stratification effect exerted by the air bubble on the shock wave. When the two bubbles merge, the energy and pressure peak of the shock wave decrease significantly to less than 40% of the original values.

JOURNAL OF FLUID MECHANICS (2021)

Article Engineering, Multidisciplinary

Double droplet splashing on a thin liquid film with a pseudopotential lattice Boltzmann method

Hao Yuan et al.

Summary: This study investigates the interaction of two droplets splashing on a stationary film, exploring the effects of various parameters on the crown geometry evolution. Factors such as Reynolds number, Weber number, film thickness, and horizontal/vertical distance between droplets significantly influence the stability and evolution process of the crown shape. Energy loss and velocity discontinuity are identified as key factors impacting the behavior of the central and side jets during impacts.

ENGINEERING APPLICATIONS OF COMPUTATIONAL FLUID MECHANICS (2021)

Article Thermodynamics

Simulation of laser-produced single cavitation bubbles with hybrid thermal Lattice Boltzmann method

Chi Peng et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

Article Engineering, Mechanical

Dynamics of a cavitation bubble near a solid surface and the induced damage

Hemant J. Sagar et al.

JOURNAL OF FLUIDS AND STRUCTURES (2020)

Article Engineering, Multidisciplinary

Droplet Impact on a Moving Thin Film with Pseudopotential Lattice Boltzmann Method

Jinchao He et al.

MATHEMATICAL PROBLEMS IN ENGINEERING (2020)

Article Acoustics

Cavitation bubble interaction with a rigid spherical particle on a microscale

Jure Zevnik et al.

ULTRASONICS SONOCHEMISTRY (2020)

Article Computer Science, Interdisciplinary Applications

Three-dimensional non-orthogonal MRT pseudopotential lattice Boltzmann model for multiphase flows

Q. Li et al.

COMPUTERS & FLUIDS (2019)

Article Thermodynamics

Simulation of multiple cavitation bubbles interaction with single-component multiphase Lattice Boltzmann method

Chi Peng et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)

Article Mechanics

A comparative study between numerical methods in simulation of cavitating bubbles

Ebrahim Ghahramani et al.

INTERNATIONAL JOURNAL OF MULTIPHASE FLOW (2019)

Article Engineering, Biomedical

Cavitation nucleation in gelatin: Experiment and mechanism

Wonmo Kang et al.

ACTA BIOMATERIALIA (2018)

Article Mechanics

Interaction of particles with a cavitation bubble near a solid wall

Leonel A. Teran et al.

PHYSICS OF FLUIDS (2018)

Article Mechanics

Multiscale tow-phase flow modeling of sheet and cloud cavitation

Chao-Tsung Hsiao et al.

INTERNATIONAL JOURNAL OF MULTIPHASE FLOW (2017)

Review Thermodynamics

Lattice Boltzmann methods for multiphase flow and phase-change heat transfer

Q. Li et al.

PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2016)

Review Thermodynamics

A critical review of the pseudopotential multiphase lattice Boltzmann model: Methods and applications

Li Chen et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2014)

Article Thermodynamics

Interaction of two oscillating bubbles near a rigid boundary

Lup Wai Chew et al.

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2013)

Article Physics, Fluids & Plasmas

Forcing scheme in pseudopotential lattice Boltzmann model for multiphase flows

Q. Li et al.

PHYSICAL REVIEW E (2012)

Article Chemistry, Physical

Mesoscopic simulation of non-ideal fluids with self-tuning of the equation of state

Carlos E. Colosqui et al.

SOFT MATTER (2012)

Article Mathematics, Applied

Lattice Boltzmann simulation of cavitating bubble growth with large density ratio

Xiao-Peng Chen et al.

COMPUTERS & MATHEMATICS WITH APPLICATIONS (2011)

Article Acoustics

Modeling the coupling of reaction kinetics and hydrodynamics in a collapsing cavity

Sudib K. Mishra et al.

ULTRASONICS SONOCHEMISTRY (2010)

Article Physics, Multidisciplinary

Controlled multibubble surface cavitation

Nicolas Bremond et al.

PHYSICAL REVIEW LETTERS (2006)

Article Mechanics

Equations of state in a lattice Boltzmann model

P Yuan et al.

PHYSICS OF FLUIDS (2006)

Article Physics, Fluids & Plasmas

Surface tension effects on the behavior of two cavities near a rigid wall

ZY Zhang et al.

PHYSICAL REVIEW E (2005)

Article Physics, Fluids & Plasmas

Lattice Boltzmann method for homogeneous and heterogeneous cavitation

MC Sukop et al.

PHYSICAL REVIEW E (2005)