☆ 4.7 Article

Geometric defects identification and deviation compensation in laser deposition manufacturing

OPTICS AND LASER TECHNOLOGY (2022)

Related references

Note: Only part of the references are listed.

Article Automation & Control Systems

Influence of standoff distance and laser defocusing distance on direct laser metal deposition of a nickel-based superalloy

Marco Mazzarisi et al.

Summary: This study investigates the deposition troubles in direct laser metal deposition (DLMD) by simulating variations in standoff distance and laser defocusing distance. The results show that these process parameters have an influence on the geometrical characteristics of the clad.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2022)

Add to Collection

Article Materials Science, Multidisciplinary

The influence of laser directed energy deposition (DED) processing parameters for Al5083 studied by central composite design

David Svetlizky et al.

Summary: This study investigates the influence of processing parameters on the characteristics of laser directed energy deposition of high-quality structural Al-based alloys. The results reveal that the powder mass flow rate has a strong influence on the deposited track's height and dilution, while the laser power and hatch spacing interaction significantly affects the track's height and dilution. The microstructure and microhardness of the deposited material are also discussed.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

Add to Collection

Article Optics

Effect of hatch spacing and laser power on microstructure, texture, and thermomechanical properties of laser powder bed fusion (L-PBF) additively manufactured NiTi

Sayed Ehsan Saghaian et al.

Summary: This study evaluates the effects of L-PBF-AM parameters on the thermomechanical behavior and microstructure of Ni50.8Ti49.2 shape memory alloy. The results show that the size of melt pool decreases and scan tracks become discontinuous with decreasing laser power. Porosity level increases with larger hatch spacing and lower laser power. Transformation temperatures increase, and the critical stress, recoverable strain, and functional stability of samples improve with lower hatch spacing. L-PBF-AM can tailor the microstructure from highly textured samples to equiaxed solidification front with island grains and random orientations.

OPTICS AND LASER TECHNOLOGY (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Inline Optical Coherence Tomography for Multidirectional Process Monitoring in a Coaxial LMD-w Process

Charlotte Stehmar et al.

Summary: This article discusses the challenges of process stability in additive manufacturing and introduces the use of optical coherence tomography (OCT) measuring system for precise inline monitoring and process control, which can improve the reproducibility and precision of additive laser processes in the future.

APPLIED SCIENCES-BASEL (2022)

Add to Collection

Article Engineering, Manufacturing

Rapid surface defect identification for additive manufacturing with in-situ point cloud processing and machine learning

Lequn Chen et al.

Summary: This paper presents a rapid surface defect identification method for directed energy deposition in additive manufacturing, utilizing machine learning for automatic surface monitoring and achieving a high accuracy rate in defect identification.

VIRTUAL AND PHYSICAL PROTOTYPING (2021)

Add to Collection

Article Optics

Study of surface topography detection and analysis methods of direct laser deposition 24CrNiMo alloy steel

Lin Cao et al.

Summary: A precise laser displacement sensor monitoring system was established for direct laser deposition process, obtaining two-dimensional and three-dimensional topography images through data analysis and point cloud reconstruction. The relationship between scanning speed and deposition characteristics was studied, showing that surface defects are related to solidification speed and phase structure of deposition. The results suggest that increasing scanning speed leads to improved surface quality but reduced depositing efficiency.

OPTICS AND LASER TECHNOLOGY (2021)

Add to Collection

Article Chemistry, Physical

Coaxial Monitoring of AISI 316L Thin Walls Fabricated by Direct Metal Laser Deposition

Vito Errico et al.

Summary: The study aimed to optimize deposition strategies for thin walls in AISI 316L stainless steel, utilizing a coaxial monitoring system and image processing algorithms to determine the best deposition strategy. The results highlighted the efficiency and stability of the region-based active contour algorithm in image processing, providing the correct building strategy for DMLD manufactured 3D components.

MATERIALS (2021)

Add to Collection

Review Engineering, Industrial

Opportunities and challenges in additive manufacturing of functionally graded metallic materials via powder-fed laser directed energy deposition: A review

M. Ansari et al.

Summary: Additive manufacturing has been growing and changing the manufacturing paradigm, with functionally graded materials being a class of engineered materials. Laser directed energy deposition is capable of fabricating functionally graded metallic materials. Recent studies on the feasibility of AM-FGM for different metallic systems have increased, with a focus on processing, phase formation, and properties.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Effect of laser power and powder feed rate on interfacial crack and mechanical/microstructural characterizations in repairing of 630 stainless steel using direct energy deposition

Tae Geon Kim et al.

Summary: The occurrence of defects in repair processes using DED was investigated based on laser power and powder feed rate. Proper selection of laser power and powder feed rate can help avoid defects, which significantly degrade the mechanical properties of the repaired parts.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

Add to Collection

Article Optics

In-process measurement of melt pool cross-sectional geometry and grain orientation in a laser directed energy deposition additive manufacturing process

Zhe Sun et al.

OPTICS AND LASER TECHNOLOGY (2020)

Add to Collection

Article Automation & Control Systems

Closed loop control of melt pool width in robotized laser powder-directed energy deposition process

Meysam Akbari et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)

Add to Collection

Article Engineering, Multidisciplinary

Online quality monitoring in material extrusion additive manufacturing processes based on laser scanning technology

Weiyi Lin et al.

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Defect Identification and Mitigation Via Visual Inspection in Large-Scale Additive Manufacturing

Michael Borish et al.

JOM (2019)

Add to Collection

Article Optics

Monitoring of laser metal deposition height by means of coaxial laser triangulation

Simone Donadello et al.

OPTICS AND LASERS IN ENGINEERING (2019)

Add to Collection

Proceedings Paper Automation & Control Systems

Extracting of Cross Section Profiles from Complex Point Cloud Data Sets

H. Setareh Kokab et al.

IFAC PAPERSONLINE (2019)

Add to Collection

Review Optics

Review of surface profile measurement techniques based on optical interferometry

Yunzhi Wang et al.

OPTICS AND LASERS IN ENGINEERING (2017)

Add to Collection

Article Engineering, Multidisciplinary

A methodology for precision additive manufacturing through compensation

Shukri Afazov et al.

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2017)

Add to Collection

Article Engineering, Mechanical

Stereo vision-based repair of metallic components

Renwei Liu et al.

RAPID PROTOTYPING JOURNAL (2017)

Add to Collection

Proceedings Paper Engineering, Industrial

A Review on In-situ Monitoring and Adaptive Control Technology for Laser Cladding Remanufacturing

Wei-Wei Liu et al.

24TH CIRP CONFERENCE ON LIFE CYCLE ENGINEERING (2017)

Add to Collection

Article Engineering, Industrial

In situ morphology-based defect detection of selective laser melting through inline coherent imaging

Jordan A. Kanko et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2016)

Add to Collection

Article Engineering, Multidisciplinary

A hybrid method based on reduced constraint region and convex-hull edge for flatness error evaluation

Peng Li et al.

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2016)

Add to Collection

Article Engineering, Industrial

Effect of inter-layer dwell time on distortion and residual stress in additive manufacturing of titanium and nickel alloys

Erik R. Denlinger et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2015)

Add to Collection

Article Engineering, Industrial

Optimal offline compensation of shape shrinkage for three-dimensional printing processes

Qiang Huang et al.

IIE TRANSACTIONS (2015)

Add to Collection

Article Optics

Influence of scanning pattern on the edge collapse of solid parts in laser metal direct forming

Bin He et al.

OPTICS AND LASER TECHNOLOGY (2013)

Add to Collection

Article Automation & Control Systems

Control of melt pool temperature and deposition height during direct metal deposition process

Lijun Song et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2012)

Add to Collection

Article Engineering, Industrial

Surface finish in laser solid freeform fabrication of an AISI 303L stainless steel thin wall

Masoud Alimardani et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2012)

Add to Collection

Article Optics

The influence of laser and powder defocusing characteristics on the surface quality in laser direct metal deposition

Gangxian Zhu et al.

OPTICS AND LASER TECHNOLOGY (2012)

Add to Collection

Article Engineering, Manufacturing

Direct laser fabrication of nickel alloy samples

P Li et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2005)

Add to Collection

© Peeref 2019-2024. All rights reserved.