Blue laser welding of 7075-T6 aluminum alloy and carbon fiber reinforced polyetheretherketone

Laser welding was employed to join aluminum alloys and carbon fiber reinforced polymers (CFRP) inexpensively and quickly in lightweight automobiles, especially in the field of new energy vehicles. In recent years, a new way to obtain stronger high-reflection alloy laser welded joints is blue laser welding (BLW). An innovative comparative experiment was conducted between blue laser welding (BLW) and fiber laser oscillation welding (FLOW), using 7075-T6 aluminum alloy and carbon fiber reinforced polyetheretherketone (CFRP-PEEK) as study materials, and the laser welding mechanism is explained. It was concluded that the maximum tensile force of the BLW joint was 478 N, which is higher than the 290 N tensile force of FLOW. In addition, the maximum residual stress in the BLW joint is 325 MPa, which is lower than that of FLOW. The mechanism affecting the strength of the joint is the presence of a larger number and size of bubble defects inside the FLOW melt pool, and the presence of a demarcation line between the columnar and equiaxed crystals around these bubble defects is observed. This boundary line means that there is a large temperature difference. Combined with the finite element simulation results, the existence of the temperature difference leads to a different solidification sequence around the bubble defect inside the molten pool, so stress concentration occurs. Therefore, the interface of the FLOW joint is not tightly combined, and a gap phenomenon occurs. Furthermore, when the laser power in-creases, PEEK resin is extruded into the melt pool as the melt pool size approaches that of the aluminum alloy, as observed in the BLW joint. The same demarcation line between columnar and equiaxed crystals structure was observed in the PEEK resin, so that the stress concentration around the PEEK resin can lead to weakened joints in high power welding.

Automated summary

This study investigates the application of blue laser welding and fiber laser oscillation welding on aluminum alloy and CFRP-PEEK materials. The results show that the blue laser welded joint has higher strength and lower residual stress compared to the fiber laser welded joint, which is affected by bubble defects and temperature differences causing stress concentration.