☆ 4.8 Article

Surface reaction for efficient and stable inverted perovskite solar cells

NATURE (2022)

Related references

Note: Only part of the references are listed.

Article Multidisciplinary Sciences

All-perovskite tandem solar cells with improved grain surface passivation

Renxing Lin et al.

Summary: Researchers have developed ammonium-cation-passivated Pb-Sn perovskites with long diffusion lengths, enabling high-efficiency all-perovskite tandem solar cells. By enhancing the adsorption of the passivator using a stronger surface-passivator interaction, the carrier diffusion length within Pb-Sn perovskites is doubled, resulting in an efficiency of over 22%. The certified efficiency of 26.4% achieved in the all-perovskite tandem solar cells exceeds that of the best-performing single-junction perovskite solar cells.

NATURE (2022)

Add to Collection

Article Multidisciplinary Sciences

Constructing heterojunctions by surface sulfidation for efficient inverted perovskite solar cells

Xiaodong Li et al.

Summary: A stable perovskite heterojunction was achieved in inverted solar cells by sulfidating the surface of lead-rich perovskite films, resulting in improved power conversion efficiency and open-circuit voltage.

SCIENCE (2022)

Add to Collection

Article Multidisciplinary Sciences

Conformal quantum dot-SnO2 layers as electron transporters for efficient perovskite solar cells

Minjin Kim et al.

Summary: The study replaced the commonly used mesoporous titanium dioxide electron transport layer with a thin layer of polyacrylic acid-stabilized tin(IV) oxide quantum dots, which improved the efficiency and stability of perovskite solar cells and enabled successful scaling up of PSCs production.

SCIENCE (2022)

Add to Collection

Article Optics

Quantum-size-tuned heterostructures enable efficient and stable inverted perovskite solar cells

Hao Chen et al.

Summary: The energy landscape of reduced-dimensional perovskites (RDPs) can be tailored by adjusting their layer width. In this study, a method to increase the layer width of RDPs in 2D/3D heterostructures is reported to address electron blocking at the interface. This method allows for the development of efficient inverted perovskite solar cells with high stability.

NATURE PHOTONICS (2022)

Add to Collection

Article Multidisciplinary Sciences

Organometallic-functionalized interfaces for highly efficient inverted perovskite solar cells

Zhen Li et al.

Summary: Functionalizing the interfaces of multication and halide perovskite solar cells with an organometallic compound, ferrocenyl-bis-thiophene-2-carboxylate (FcTc(2)), enhances their efficiency and stability. The resulting devices exhibit high performance and stability, as demonstrated by tests and continuous operation.

SCIENCE (2022)

Add to Collection

Article Multidisciplinary Sciences

Damp heat-stable perovskite solar cells with tailored-dimensionality 2D/3D heterojunctions

Randi Azmi et al.

Summary: By tailoring the dimensional fragments of two-dimensional perovskite layers, damp-heat stable perovskite solar cells with high power conversion efficiencies were successfully fabricated. These cells retain over 95% of their initial value after more than 1000 hours under damp-heat test conditions, meeting one of the critical industrial stability standards for photovoltaic modules.

SCIENCE (2022)

Add to Collection

Article Multidisciplinary Sciences

Inactive (PbI2)2RbCl stabilizes perovskite films for efficient solar cells

Yang Zhao et al.

Summary: In halide perovskite solar cells, introducing RbCl doping effectively stabilizes the perovskite phase by converting excess PbI2 into an inactive compound. This strategy achieved a certified PCE of 25.6% for FAPbI(3) perovskite solar cells, with high device stability and minimal hysteresis effects.

SCIENCE (2022)

Add to Collection

Article Energy & Fuels

Carrier control in Sn-Pb perovskites via 2D cation engineering for all-perovskite tandem solar cells with improved efficiency and stability

Jinhui Tong et al.

Summary: This study demonstrates that the addition of mixed bulky organic cations can improve the structural and optoelectronic properties of Sn-Pb perovskite thin films, resulting in high-efficiency single-junction and all-perovskite tandem solar cells with improved stability.

NATURE ENERGY (2022)

Add to Collection

Article Energy & Fuels

Intact 2D/3D halide junction perovskite solar cells via solid-phase in-plane growth

Yeoun-Woo Jang et al.

Summary: Researchers have developed a solid-phase method to grow phase-pure two-dimensional perovskites in perovskite solar cells, enhancing device efficiency and stability. By growing a stable two-dimensional film on top of a three-dimensional film using a solvent-free method, an intact 2D/3D heterojunction is formed, resulting in high photovoltage in the device.

NATURE ENERGY (2021)

Add to Collection

Article Multidisciplinary Sciences

Perovskite solar cells with atomically coherent interlayers on SnO2 electrodes

Hanul Min et al.

Summary: By introducing an interlayer between the electron-transporting and perovskite layers in perovskite solar cells, researchers have successfully enhanced charge extraction and transport from the perovskite, leading to higher power conversion efficiency and fewer interfacial defects. The coherent interlayer allowed the fabrication of devices with a certified efficiency of 25.5%, which maintained about 90% of its initial efficiency even after continuous light exposure for 500 hours. The findings provide guidelines for designing defect-minimizing interfaces in metal halide perovskites and electron-transporting layers.

NATURE (2021)

Add to Collection

Review Chemistry, Physical

3D/2D passivation as a secret to success for polycrystalline thin-film solar cells

Deborah L. McGott et al.

Summary: Polycrystalline photovoltaic materials offer low costs and good scalability, but grain boundaries in these materials may affect carrier recombination. Recent studies have shown that passivation of absorber surfaces through the formation of low-dimensional van der Waals materials can improve device performance in polycrystalline thin-film photovoltaics.

JOULE (2021)

Add to Collection

Article Energy & Fuels

Defect compensation in formamidinium-caesium perovskites for highly efficient solar mini-modules with improved photostability

Yehao Deng et al.

Summary: The addition of excessive AX in formamidinium-caesium mixed-cation perovskites improves their photostability by compensating iodide vacancies and suppressing ion migration and defects generation during long-term illumination. This approach impedes the generation of hole traps and phase segregation, ultimately enhancing the stability and efficiency of the perovskite mini-modules.

NATURE ENERGY (2021)

Add to Collection

Review Nanoscience & Nanotechnology

Minimizing non-radiative recombination losses in perovskite solar cells

Deying Luo et al.

NATURE REVIEWS MATERIALS (2020)

Add to Collection

Article Multidisciplinary Sciences

Efficient tandem solar cells with solution-processed perovskite on textured crystalline silicon

Yi Hou et al.

SCIENCE (2020)

Add to Collection

Review Chemistry, Physical

From Defects to Degradation: A Mechanistic Understanding of Degradation in Perovskite Solar Cell Devices and Modules

Sean P. Dunfield et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Review Nanoscience & Nanotechnology

Scalable fabrication and coating methods for perovskite solar cells and solar modules

Nam-Gyu Park et al.

NATURE REVIEWS MATERIALS (2020)

Add to Collection

Article Multidisciplinary Sciences

From graphene oxide towards aminated graphene: facile synthesis, its structure and electronic properties

Maxim K. Rabchinskii et al.

SCIENTIFIC REPORTS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Perovskite Solution Aging: What Happened and How to Inhibit?

Xiao Wang et al.

CHEM (2020)

Add to Collection

Article Chemistry, Physical

Arylammonium-Assisted Reduction of the Open-Circuit Voltage Deficit in Wide-Bandgap Perovskite Solar Cells: The Role of Suppressed Ion Migration

Cong Chen et al.

ACS ENERGY LETTERS (2020)

Add to Collection

Article Multidisciplinary Sciences

Monolithic perovskite/silicon tandem solar cell with >29% efficiency by enhanced hole extraction

Amran Al-Ashouri et al.

SCIENCE (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Efficiency progress of inverted perovskite solar cells

Xuesong Lin et al.

ENERGY & ENVIRONMENTAL SCIENCE (2020)

Add to Collection

Article Optics

Surface passivation of perovskite film for efficient solar cells

Qi Jiang et al.

NATURE PHOTONICS (2019)

Add to Collection

Article Multidisciplinary Sciences

Planar perovskite solar cells with long-term stability using ionic liquid additives

Sai Bai et al.

NATURE (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Surface Defect Dynamics in Organic-Inorganic Hybrid Perovskites: From Mechanism to Interfacial Properties

Collin Stecker et al.

ACS NANO (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Conformal monolayer contacts with lossless interfaces for perovskite single junction and monolithic tandem solar cells

Amran Al-Ashouri et al.

ENERGY & ENVIRONMENTAL SCIENCE (2019)

Add to Collection

Article Physics, Applied

Recombination velocity less than 100 cm/s at polycrystalline Al2O3/CdSeTe interfaces

Darius Kuciauskas et al.

APPLIED PHYSICS LETTERS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Determining Band-Edge Energies and Morphology-Dependent Stability of Formamidinium Lead Perovskite Films Using Spectroelectrochemistry and Photoelectron Spectroscopy

R. Clayton Shallcross et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Revisiting Nitrogen Species in Covalent Triazine Frameworks

Dmitrii Yu. Osadchii et al.

LANGMUIR (2017)

Add to Collection

Article Energy & Fuels

Top and bottom surfaces limit carrier lifetime in lead iodide perovskite films

Ye Yang et al.

NATURE ENERGY (2017)

Add to Collection

Article Multidisciplinary Sciences

Optical determination of Shockley-Read-Hall and interface recombination currents in hybrid perovskites

Valerio Sarritzu et al.

SCIENTIFIC REPORTS (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Junction Quality of SnO2-Based Perovskite Solar Cells Investigated by Nanometer-Scale Electrical Potential Profiling

Chuanxiao Xiao et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Add to Collection

Review Physics, Applied

Quantitative analysis of time-resolved microwave conductivity data

Obadiah G. Reid et al.

JOURNAL OF PHYSICS D-APPLIED PHYSICS (2017)

Add to Collection

Article Chemistry, Physical

N-doped carbon quantum dots/TiO2 composite with improved photocatalytic activity

Natercia C. T. Martins et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2016)

Add to Collection

Article Physics, Applied

Unusual defect physics in CH3NH3PbI3 perovskite solar cell absorber

Wan-Jian Yin et al.

APPLIED PHYSICS LETTERS (2014)

Add to Collection

Article Chemistry, Physical

Solvent engineering for high-performance inorganic-organic hybrid perovskite solar cells

Nam Joong Jeon et al.

NATURE MATERIALS (2014)

Add to Collection

Article Chemistry, Physical

Ligand exchange in quaternary alloyed nanocrystals - a spectroscopic study

Grzegorz Gabka et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2014)

Add to Collection

Article Chemistry, Multidisciplinary

CP2K: atomistic simulations of condensed matter systems

Juerg Hutter et al.

WILEY INTERDISCIPLINARY REVIEWS-COMPUTATIONAL MOLECULAR SCIENCE (2014)

Add to Collection

© Peeref 2019-2024. All rights reserved.