Related references
Note: Only part of the references are listed.A review on metallurgical aspects of laser additive manufacturing (LAM): Stainless steels, nickel superalloys, and titanium alloys
Kh. Moeinfar et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)
Strain hardening engineering via grain size control in laser powder-bed fusion
Leonardo Shoji Aota et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)
Thin Strip vs Direct Chill Casting: The Effects of Casting Cooling Rate on the As-cast Microstructure of AA6005 Al-Si-Mg Alloy
Shengze Yin et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2022)
Negative strain rate sensitivity of yield strength of Al-Si alloy additive-manufactured using laser powder bed fusion
Naoki Takata et al.
SCRIPTA MATERIALIA (2022)
Effect of heat treatment on the microstructure and mechanical properties of Er-containing Al-7Si-0.6 Mg alloy by laser powder bed fusion
Bo Zhang et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)
Enhancing as-built microstructural integrity and tensile properties in laser powder bed fusion of AlSi10Mg alloy using a comprehensive parameter optimization procedure
Adib Salandari-Rabori et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Dimensional changes induced by precipitation of supersaturated solid solution Si in selectively laser-melted AlSi10Mg alloy during heat treatment
Jun Yaokawa et al.
MATERIALS CHARACTERIZATION (2021)
Advanced method for structure-strength-ductility assessment of dispersion-strengthened FCC metals using activation work, mean slip distance and constitutive relation analyses: Decoding the Haasen plot
S. Saimoto et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Correlation of dynamic compressive properties, adiabatic shear banding, and ballistic performance of high-strength 2139 and 7056 aluminum alloys
Selim Kim et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Metal additive manufacturing in aerospace: A review
Byron Blakey-Milner et al.
MATERIALS & DESIGN (2021)
The Portevin-Le Chatelier (PLC) effect in an Al-Cu aluminum alloy fabricated by selective laser melting
Zhiheng Hu et al.
MATERIALS CHARACTERIZATION (2021)
Flow behavior and fracture of Al-Mg-Si alloy at cryogenic temperatures
Danielle Cristina Camilo Magalhaes et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2021)
Effect of input powder attributes on optimized processing and as-built tensile properties in laser powder bed fusion of AlSi10Mg alloy
Pusong Wang et al.
JOURNAL OF MANUFACTURING PROCESSES (2021)
Multiple, comparative heat treatment and aging schedules for controlling the microstructures and mechanical properties of laser powder bed fusion fabricated AlSi10Mg alloy
Jorge Merino et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)
Dynamic strain aging mechanisms in a metastable austenitic stainless steel
Javad Mola et al.
ACTA MATERIALIA (2021)
Comparative study of performance comparison of AlSi10Mg alloy prepared by selective laser melting and casting
Qian Yan et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)
Effect of solidification cooling rate on kinetics of continuous/discontinuous Al3(Sc,Zr) precipitation and the subsequent age-hardening response in cold-rolled AlMgSc(Zr) sheets
Qingshan Dong et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Rapid Solidification and Non-equilibrium Phase Constitution in Laser Powder Bed Fusion (LPBF) of AlSi10Mg Alloy: Analysis of Nano-precipitates, Eutectic Phases, and Hardness Evolution
Hong Qin et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2020)
Precipitation-induced mitigation of recrystallization in ultra-thin, cold-rolled AlScZrMn(Mg) sheets at brazing temperatures: The critical effect of alloy composition and thermal processing route
Qingshan Dong et al.
ACTA MATERIALIA (2020)
Stress relaxation and the cellular structure-dependence of plastic deformation in additively manufactured AlSi10Mg alloys
Zan Li et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2020)
Study on the fatigue behaviour of selective laser melted AlSi10Mg alloy
Srinivasa Rakesh Ch et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Effect of build orientation on the quasi-static and dynamic response of SLM AlSi10Mg
Tobias Maconachie et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Developing a high-strength Al-Mg-Si-Sc-Zr alloy for selective laser melting: Crack-inhibiting and multiple strengthening mechanisms
Ruidi Li et al.
ACTA MATERIALIA (2020)
Asymmetry of strain rate sensitivity between up- and down-changes in 6000 series aluminium alloys of varying Si content
M. R. Langille et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
On the role of Zr content into Portevin-Le Chatelier (PLC) effect of selective laser melted high strength Al-Cu-Mg-Mn alloy
Xiaojia Nie et al.
MATERIALS LETTERS (2019)
New Aluminum Alloys Specifically Designed for Laser Powder Bed Fusion: A Review
Alberta Aversa et al.
MATERIALS (2019)
Microstructures and mechanical property of AlMgScZrMn - A comparison between selective laser melting, spark plasma sintering and cast
Minbo Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Effect of aging treatment on the microstructure and mechanical properties of Al-3.02Mg-0.2Sc-0.1Zr alloy printed by selective laser melting
Ruidi Li et al.
MATERIALS & DESIGN (2019)
Strain rate dependence of compressive behavior in an Al-Zn-Mg alloy processed by ECAP
Mohamed A. Afifi et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
3D printing of Aluminium alloys: Additive Manufacturing of Aluminium alloys using selective laser melting
Nesma T. Aboulkhair et al.
PROGRESS IN MATERIALS SCIENCE (2019)
Solute clustering and supersaturated solid solution of AlSi10Mg alloy fabricated by selective laser melting
Takashi Maeshima et al.
HELIYON (2019)
Microstructure, precipitates and hardness of selectively laser melted AlSi10Mg alloy before and after heat treatment
Le Zhou et al.
MATERIALS CHARACTERIZATION (2018)
On the role of atmospheric oxygen into mechanical properties and fracture behavior of selective laser melted AlCu5MnCdVA
Zhiheng Hu et al.
MATERIALS & DESIGN (2018)
Solidification pattern, microstructure and texture development in Laser Powder Bed Fusion (LPBF) of Al10SiMg alloy
Hong Qin et al.
MATERIALS CHARACTERIZATION (2018)
Pulsed SLM-manufactured AlSi10Mg alloy: Mechanical properties and microstructural effects of designed laser energy densities
Lin-zhi Wang et al.
JOURNAL OF MANUFACTURING PROCESSES (2018)
Evaluation of the stress-strain relationship of constituent phases in AlSi10Mg alloy produced by selective laser melting using crystal plasticity FEM
Dong-Kyu Kim et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Strain rate sensitivity and fracture mechanism of AlSi10Mg parts produced by Selective Laser Melting
I. Rosenthal et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Processing and characterization of continuous-cast AlMgSc(Zr) sheets for improved strength
Vahid Fallah et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Dynamic response of AlSi10Mg alloy fabricated by selective laser melting
E. Zaretsky et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Strength and strain hardening of a selective laser melted AlSi10Mg alloy
B. Chen et al.
SCRIPTA MATERIALIA (2017)
Rapid Solidification: Selective Laser Melting of AlSi10Mg
Ming Tang et al.
JOM (2016)
Stress partitioning behavior of an AlSi10Mg alloy produced by selective laser melting during tensile deformation using in situ neutron diffraction
Dong-Kyu Kim et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
Characterization of the microstructure, texture and mechanical properties of 7075 aluminum alloy in early stage of severe plastic deformation
M. Moghaddam et al.
MATERIALS CHARACTERIZATION (2016)
Improving the fatigue behaviour of a selectively laser melted aluminium alloy: Influence of heat treatment and surface quality
Nesma T. Aboulkhair et al.
MATERIALS & DESIGN (2016)
Thermally activated flow of dislocations in Al-Mg binary alloys
M. Niewczas et al.
ACTA MATERIALIA (2015)
Assessment of geometrically necessary dislocation levels derived by 3D EBSD
P. J. Konijnenberg et al.
ACTA MATERIALIA (2015)
Activation Volume and Density of Mobile Dislocations in Plastically Deforming Zr-1pctSn-1pctNb-0.1pctFe Alloy
Apu Sarkar et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2015)
The effects of aging treatment and strain rates on damage evolution in AA 6061 aluminum alloy in compression
A. O. Adesola et al.
MATERIALS & DESIGN (2013)
Solute strengthening from first principles and application to aluminum alloys
G. P. M. Leyson et al.
ACTA MATERIALIA (2012)
Strengthening mechanisms in an Al-Mg alloy
E. L. Huskins et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Kinetic analysis of dynamic point defect pinning in aluminium initiated by strain rate changes
S. Saimoto et al.
PHILOSOPHICAL MAGAZINE (2009)
A predictive mechanism for dynamic strain ageing in aluminium-magnesium alloys
William A. Curtin et al.
NATURE MATERIALS (2006)
Geometrically necessary dislocation and size-dependent plasticity
HJ Gao et al.
SCRIPTA MATERIALIA (2003)