Related references
Note: Only part of the references are listed.Deformation behaviour of TWIP steels: Constitutive modelling informed by local and integral experimental methods used in concert
S. Martin et al.
MATERIALS CHARACTERIZATION (2022)
Non-cube-on-cube orientation relationship between M23C6 and austenite in an austenitic stainless steel
Guanghui Chen et al.
SCRIPTA MATERIALIA (2022)
Dynamic strain aging mechanisms in a metastable austenitic stainless steel
Javad Mola et al.
ACTA MATERIALIA (2021)
The precipitation control of grain boundary M23C6 phases and the ductility improvement in aged 22Cr-25Ni-WCuNbN austenitic stainless steel by Co addition
Lan Wang et al.
MATERIALS LETTERS (2020)
Evolution of the microstructure and mechanical properties of HR3C austenitic stainless steel after ageing for up to 30,000 h at 650-750 °C
A. Zielinski et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Impact of Al addition on deformation behavior of Fe-Cr-Ni-Mn-C austenitic stainless steel
Guanghui Chen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Thermal Analysis of the Formation and Dissolution of Cr-Rich Carbides in Al-Alloyed Stainless Steels
Reza Rahimi et al.
ADVANCED ENGINEERING MATERIALS (2019)
Austenite grain growth of medium-carbon alloy steel with aluminum additions during heating process
Zi-yi Liu et al.
INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2019)
Effect of temperature on the stacking fault energy and deformation behaviour in 316L austenitic stainless steel
David Molnar et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Effect of Co on the microstructure evolution of modified HR3C austenitic heat-resistant steels during long-term ageing
J. M. Bai et al.
MATERIALS AT HIGH TEMPERATURES (2019)
Tensile elongation of lean-alloy austenitic stainless steels: transformation-induced plasticity versus planar glide
Qiuliang Huang et al.
MATERIALS SCIENCE AND TECHNOLOGY (2017)
Tempering of Martensite and Subsequent Redistribution of Cr, Mn, Ni, Mo, and Si Between Cementite and Martensite Studied by Magnetic Measurements
Javad Mola et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2017)
Aging precipitation behavior and its influence on mechanical properties of Mn18Cr18N austenitic stainless steel
Fengming Qin et al.
METALS AND MATERIALS INTERNATIONAL (2017)
Dependence of grain boundary character distribution on the initial grain size of 304 austenitic stainless steel
Wen Feng et al.
PHILOSOPHICAL MAGAZINE (2017)
Contributions of ε and α' TRIP Effects to the Strength and Ductility of AISI 304 (X5CrNi18-10) Austenitic Stainless Steel
Andreas Weiss et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2016)
Stacking Fault Energy Maps of Fe-Mn-Al-C-Si Steels: Effect of Temperature, Grain Size, and Variations in Compositions
O. A. Zambrano
JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME (2016)
Effects of carbide precipitation on the microstructural and tribological properties of Co-Cr-Mo-C medical implants after thermal treatment
F. Z. Hassani et al.
JOURNAL OF MATERIALS SCIENCE (2016)
Anomalous stabilization of austenitic stainless steels at cryogenic temperatures
Michael Hauser et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Influence of Al on the temperature dependence of strain hardening behavior and glide planarity in Fe-Cr-Ni-Mn-C austenitic stainless steels
Reza Rahimi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Stacking fault energy and deformation mechanisms in Fe-xMn-0.6C-yAl TWIP steel
Jin-Kyung Kim et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Influence of Martensite Fraction on Tensile Properties of Quenched and Partitioned (Q&P) Martensitic Stainless Steels
Qiuliang Huang et al.
STEEL RESEARCH INTERNATIONAL (2016)
Deformation Mechanisms in Austenitic TRIP/TWIP Steel as a Function of Temperature
Stefan Martin et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2016)
Precipitation of M23C6 and its effect on tensile properties of 0.3C-20Cr-11Mn-1Mo-0.35N steel
Leigang Zheng et al.
MATERIALS & DESIGN (2015)
Prediction of the local deformation mechanisms in metastable austenitic steels from the local concentration of the main alloying elements
S. Martin et al.
MATERIALS LETTERS (2015)
Segregation-Induced Enhancement of Low-Temperature Tensile Ductility in a Cast High-Nitrogen Austenitic Stainless Steel Exhibiting Deformation-Induced α' Martensite Formation
Javad Mola et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2015)
Deformation Bands in High-Alloy Austenitic 16Cr6Mn6Ni TRIP Steel: Phase Transformation and Its Consequences on Strain Hardening at Room Temperature
Stefan Martin et al.
STEEL RESEARCH INTERNATIONAL (2015)
Microstructural evolution and solidification cracking susceptibility of Fe-18Mn-0.6C-xAl steel welds
Jaehong Yoo et al.
JOURNAL OF MATERIALS SCIENCE (2015)
Quantification of deformation induced α′-martensite in Fe-19Cr-3Mn-4Ni-0.15C-0.15N austenitic steel by in situ magnetic measurements
M. Hauser et al.
MATERIALS SCIENCE AND TECHNOLOGY (2015)
A Stacking Fault Energy Perspective into the Uniaxial Tensile Deformation Behavior and Microstructure of a Cr-Mn Austenitic Steel
H. Barman et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2014)
The influence of silicon and aluminum alloying on the lattice parameter and stacking fault energy of austenitic steel
G. R. Lehnhoff et al.
SCRIPTA MATERIALIA (2014)
The effects of Si on the mechanical twinning and strain hardening of Fe-18Mn-0.6C twinning-induced plasticity steel
Kookhyun Jeong et al.
ACTA MATERIALIA (2013)
A review on nickel-free nitrogen containing austenitic stainless steels for biomedical applications
Mohd Talha et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2013)
The Effect of Chemical Composition and Heat Treatment Conditions on Stacking Fault Energy for Fe-Cr-Ni Austenitic Stainless Steel
Toshio Yonezawa et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2013)
Microstructure and tensile behavior of duplex low-density steel containing 5 mass% aluminum
S. -J. Park et al.
SCRIPTA MATERIALIA (2013)
Influence of Al content and precipitation state on the mechanical behavior of austenitic high-Mn low-density steels
I. Gutierrez-Urrutia et al.
SCRIPTA MATERIALIA (2013)
Multistage strain hardening through dislocation substructure and twinning in a high strength and ductile weight-reduced Fe-Mn-Al-C steel
I. Gutierrez-Urrutia et al.
ACTA MATERIALIA (2012)
Effects of Al on microstructure and tensile properties of C-bearing high Mn TWIP steel
J-E. Jin et al.
ACTA MATERIALIA (2012)
Twinning and martensite in a 304 austenitic stainless steel
Y. F. Shen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Metal Allergy and Systemic Contact Dermatitis: An Overview
Yoko Yoshihisa et al.
DERMATOLOGY RESEARCH AND PRACTICE (2012)
On the origin of dynamic strain aging in twinning-induced plasticity steels
Seok-Jae Lee et al.
ACTA MATERIALIA (2011)
Stacking fault energies of Mn, Co and Nb alloyed austenitic stainless steels
Song Lu et al.
ACTA MATERIALIA (2011)
Nickel and cobalt allergy before and after nickel regulation - evaluation of a public health intervention
Jacob Pontoppidan Thyssen
CONTACT DERMATITIS (2011)
Stress-Induced Martensitic Transformation Behaviors at Various Temperatures and Their TRIP Effects in SUS304 Metastable Austenitic Stainless Steel
Noriyuki Tsuchida et al.
ISIJ INTERNATIONAL (2011)
Effect of Al on the stacking fault energy of Fe-18Mn-0.6C twinning-induced plasticity
Jinkyung Kim et al.
SCRIPTA MATERIALIA (2011)
Tensile deformation behavior of high manganese austenitic steel: The role of grain size
G. Dini et al.
MATERIALS & DESIGN (2010)
Microstructural evolution and strain hardening of Fe-24Mn and Fe-30Mn alloys during tensile deformation
X. Liang et al.
ACTA MATERIALIA (2009)
Prevention of Nickel Allergy: The Case for Regulation?
Linh K. Lu et al.
DERMATOLOGIC CLINICS (2009)
Influence of Thermal Homogenization Treatment on Structure and Impact Toughness of H13 ESR Steel
Ma Dang-shen et al.
JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL (2009)
Effect of cobalt on the microstructure of tempered martensitic 9Cr steel for ultra-supercritical power plants
L. Helis et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)
Origin of Extended Tensile Ductility of a Fe-28Mn-10Al-1C Steel
J. D. Yoo et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2009)
Load Partitioning and Strain-Induced Martensite Formation during Tensile Loading of a Metastable Austenitic Stainless Steel
P. Hedstrom et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2009)
Enhanced Mechanical Properties of a Novel High-Nitrogen Cr-Mn-Ni-Si Austenitic Stainless Steel via TWIP/TRIP Effects
M. Pozuelo et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2009)
Microband-induced plasticity in a high Mn-Al-C light steel
Je Doo Yoo et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
On the negative strain rate sensitivity of Hadfield steel
D. Canadinc et al.
SCRIPTA MATERIALIA (2008)
Localized deformation due to Portevin-LeChatelier effect in 18Mn-0.6C TWIP austenitic steel
Lei Chen et al.
ISIJ INTERNATIONAL (2007)
Influence of alloying elements on the kinetics of strain-induced martensitic nucleation in low-alloy, multiphase high-strength steels
L Samek et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2006)
Effect of dynamic strain aging on high temperature properties of austenitic stainless steel
KP Peng et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
Temperature dependence of strain hardening and plastic instability behaviors in austenitic stainless steels
TS Byun et al.
ACTA MATERIALIA (2004)
Correlations between the calculated stacking fault energy and the plasticity mechanisms in Fe-Mn-C alloys
S Allain et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
Phase transformation during cavitation erosion of a Co stainless steel
Z Xiaojun et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)
Effect of Co addition on microstructure in high Cr ferritic steels
K Yamada et al.
ISIJ INTERNATIONAL (2003)
Solidification, segregation, and banding in carbon and alloy steels
G Krauss
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2003)
Influence of temperature and strain rate on tensile work hardening behaviour of type 316 LN austenitic stainless steel
EI Samuel et al.
SCRIPTA MATERIALIA (2002)
Kinetics of deformation induced martensitic transformation in a 304 stainless steel
HC Shin et al.
SCRIPTA MATERIALIA (2001)
Deformation of single crystal Hadfield steel by twinning and slip
I Karaman et al.
ACTA MATERIALIA (2000)