☆ 4.6 Article

Solvent-induced crack growth in poly(methyl methacrylate)/multiwalled carbon nanotube composites

MATERIALS CHEMISTRY AND PHYSICS (2022)

Related references

Note: Only part of the references are listed.

Article Polymer Science

Multifunctionality in ultra high molecular weight polyethylene nanocomposites with reduced graphene oxide: Hardness, impact and tribological properties

Leice G. Amurin et al.

Summary: By dispersing reduced graphene oxide in an ultra high molecular weight polyethylene matrix, nanocomposites with high performance at low nanofiller contents were produced. The addition of graphene enhanced the wear resistance performance of the composite material, making it suitable for various high performance applications. This research result is of great significance for improving the performance of polymers.

POLYMER (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Moisture dependent tensile and creep behaviour of multi-wall carbon nanotube and carbon fibre reinforced, injection moulded polyamide 6 matrix multi-scale composites

Roland Petreny et al.

Summary: This study investigated the creep behavior and moisture content dependence in injection molded hybrid composites reinforced with carbon fibers and carbon nanotubes. The presence of carbon fibers helped to distribute carbon nanotubes uniformly in the matrix, leading to lower creep rates. The synergistic effects of adding carbon nanotubes to the composite further decreased the creep rate, with a lower decrease in crystallinity and moisture absorption compared to composites only reinforced with carbon nanotubes.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

Add to Collection

Article Chemistry, Physical

A critical role of CNT real volume fraction on nanocomposite modulus

Ke Duan et al.

Summary: This study introduces the concept of the real volume fraction of carbon nanotubes (CNTs) and develops a new micromechanical model for the modulus of nanocomposites. The correctness and applicability of the model are verified through molecular dynamics simulations and experimental tests. Additionally, the study finds that the low real volume fraction of multi-walled CNTs is the key reason for the inferior mechanical properties of nanocomposites with uniformly dispersed fillers.

CARBON (2022)

Add to Collection

Article Materials Science, Composites

Modeling of the piezoresistive behavior of carbon nanotube/polymer composites during stress relaxation

Wonbo Shim et al.

Summary: The resistance change of carbon nanotube (CNT)/polymer composites during stress relaxation is strongly influenced by CNT concentration and aspect ratio. At low concentrations, the resistance increases regardless of CNT aspect ratio as relaxation progresses. A new resistor model based on the number of contacts between CNTs within tunneling distance was developed to explain this phenomenon, showing that insufficient contacts lead to increased tunneling resistance and overall resistance in the composites. This model was then used to qualitatively explain the resistance change during tensile tests, demonstrating its validity.

POLYMER COMPOSITES (2022)

Add to Collection

Article Engineering, Mechanical

A thermodynamically consistent continuum damage model for time-dependent failure of thermoplastic polymers

Hassan Khaleghi et al.

Summary: A thermodynamically consistent damage model is proposed to predict failure in glassy polymers. The model takes into account the effects of plastic deformation and hydrostatic stress on damage evolution, and its capabilities are demonstrated through various simulated experiments.

INTERNATIONAL JOURNAL OF PLASTICITY (2022)

Add to Collection

Article Engineering, Chemical

Modeling swelling behavior of hydrogels in aqueous organic solvents

Md Rashedul Islam et al.

Summary: Hydrogel swelling is influenced by factors such as temperature, solvent composition, and hydrogel structure, with solvent-hydrogel interactions and expansion of elastic network being the driving forces. The study used a polymer Nonrandom Two-Liquid activity coefficient model and a semi-empirical expression for rubber elasticity to successfully describe the swelling and equilibrium phase compositions of hydrogels in various mixed solvents.

CHEMICAL ENGINEERING SCIENCE (2021)

Add to Collection

Article

Mori-Tanaka-based statistical methodology to compute the effective Young modulus of polymer matrix nano-composites considering the experimental quantification of nanotubes dispersion and alignment degree

Iván David Patiño et al.

Engineering Solid Mechanics (2021)

Add to Collection

Article Engineering, Mechanical

Effect of multiple hydrogen embrittlement mechanisms on crack propagation behavior of FCC metals: Competition vs. synergy

Shuang Liang et al.

Summary: Investigations on hydrogen-induced intergranular fracture in different metals were conducted through a multi-scale framework. Results indicated that the dominant hydrogen embrittlement mechanism in different metals depends on the grain boundary type, with twin boundaries exhibiting better resistance to hydrogen embrittlement.

INTERNATIONAL JOURNAL OF PLASTICITY (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Mechanical properties of multiwalled-carbon-nanotubes reinforced poly (methyl methacrylate): Effect of UV-irradiation

Kun-Tse Yang et al.

Summary: This study investigated the effects of UV light irradiation on multiwall-carbon-nanotube reinforced poly(methyl methacrylate) composites, focusing on changes in glass transition temperature and mechanical properties. The addition of MWCNTs increased the glass transition temperature of the composites, but UV irradiation negatively affected the properties. The research presented a simple equation to calculate the effective modulus of the composites and found that toughness and elongation were higher in composites without UV irradiation.

MATERIALS CHEMISTRY AND PHYSICS (2021)

Add to Collection

Article Polymer Science

The effects of solvent polarity on the crystallization behavior of thin π-conjugated polymer film in solvent mixtures investigated by grazing incident X-ray diffraction

Lin Xu et al.

POLYMER (2020)

Add to Collection

Article Chemistry, Physical

Swelling behavior of a polyacrylamide gel in water/acetonitrile mixtures across the solvent phase separation temperatures

Kazuki Hattori et al.

COLLOID AND POLYMER SCIENCE (2020)

Add to Collection

Article Polymer Science

Creep deformation of poly(methyl methacrylate)-multiwalled carbon nanotube composites

Man-Fang Chang et al.

JOURNAL OF POLYMER RESEARCH (2020)

Add to Collection

Article Polymer Science

Periodic Surface Pattern Induced by Crystallization of Polymer Brushes in Solvents

Shintaro Nakagawa et al.

MACROMOLECULES (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Elucidation of a Heterogeneous Layered Structure in the Thickness Direction of Poly(vinyl alcohol) Films with Solvent Vapor-Induced Swelling

Tsukasa Miyazaki et al.

LANGMUIR (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Spontaneous single-crystal to single-crystal transition with self-healing cracks involving solvent exchange

Jie Shen et al.

CRYSTENGCOMM (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Microhardness of poly(methyl methacrylate)-multiwalled carbon nanotubes composites: Effect of ultraviolet irradiation

Man-Fang Chang et al.

MATERIALS CHEMISTRY AND PHYSICS (2018)

Add to Collection

Article Engineering, Mechanical

Continuum approach for modeling fatigue in amorphous glassy polymers. Applications to the investigation of damage-ratcheting interaction in polycarbonate

Sami Holopainen et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2017)

Add to Collection

Article Chemistry, Physical

Absorption behavior of poly(methyl methacrylate)-multiwalled carbon nanotube composites: effects of UV irradiation

Je-Chuan Hsu et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2017)

Add to Collection

Article Polymer Science

Cracking and healing in poly(methyl methacrylate): effect of solvent

Yu-Fan Chuang et al.

JOURNAL OF POLYMER RESEARCH (2016)

Add to Collection

Article Biochemical Research Methods

Fabrication of nanochannels on polystyrene surface

Ran Peng et al.

BIOMICROFLUIDICS (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Recent Advances in Research on Carbon Nanotube-Polymer Composites

Michele T. Byrne et al.

ADVANCED MATERIALS (2010)

Add to Collection

Article Engineering, Mechanical

Search for conditions of compressive fracture of hard brittle ceramics at impact loading

G. I. Kanel et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2009)

Add to Collection

Article Polymer Science

Solvent Induced Cracking and Morphology in Banded Spherulite Poly(trimethylene terephthalate)

Keiichi Kuboyama et al.

POLYMER JOURNAL (2008)

Add to Collection

Article Chemistry, Physical

A lotus-leaf-like superhydrophobic surface prepared by solvent-induced crystallization

N Zhao et al.

CHEMPHYSCHEM (2006)

Add to Collection

Article Engineering, Mechanical

Damage, plasticity and failure of ceramics and cementitious composites subjected to multi-axial state of stress

Andrzej Litewka et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2006)

Add to Collection

Review Materials Science, Multidisciplinary

Carbon nanotube polymer composites

R Andrews et al.

CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE (2004)

Add to Collection

Article Polymer Science

Evolution of surface morphology in 2-hydroxyethyl methacrylate copolymer exposed to γ radiation

KF Chou et al.

MACROMOLECULES (2003)

Add to Collection

Article Engineering, Mechanical

A thermo-mechanical study of mode I, small-scale yielding crack-tip fields in glassy polymers

S Basu et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2002)

Add to Collection

Article Engineering, Mechanical

Role of plasticity in heat generation during high rate deformation and fracture of polycarbonate

T Bjerke et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2002)

Add to Collection

© Peeref 2019-2024. All rights reserved.