☆ 4.7 Article

Analysis of contact conditions and microstructure evolution in shear assisted processing and extrusion using smoothed particle hydrodynamics method

MATERIALS & DESIGN (2022)

Related references

Note: Only part of the references are listed.

Article Engineering, Multidisciplinary

Magnetic-assisted soft abrasive flow machining studied with smoothed particle hydrodynamics

Shoya Mohseni-Mofidi et al.

Summary: This study explores a numerical approach for soft abrasive flow machining (SAFM) to address fluid-structure interface issues and surface erosion, as well as to investigate the effect of an external magnetic field on machining performance. Results show that a magnetic field of suitable strength can considerably improve the performance of SAFM.

APPLIED MATHEMATICAL MODELLING (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Extrusion of Unhomogenized Castings of 7075 Aluminum via ShAPE

Tianhao Wang et al.

Summary: Extrusion of unhomogenized castings of the 7075 aluminum alloy has been achieved using shear assisted processing and extrusion (ShAPE). ShAPE combines plastic deformation and heat generation to rapidly fracture and dissolve secondary phases, achieving homogenization and grain refinement. Compared to conventional extrusion, ShAPE eliminates the energy-intensive and time-consuming homogenization step and significantly improves extrusion speed and mechanical properties.

MATERIALS & DESIGN (2022)

Add to Collection

Article Mathematics, Interdisciplinary Applications

Meshfree simulation and experimental validation of extreme thermomechanical conditions in friction stir extrusion

Lei Li et al.

Summary: FSE is a solid-phase processing technique that consolidates and extrudes metal powders into high-performance parts, with most studies being experimental and few numerical models. A 3D fully thermomechanically coupled SPH model was developed in this study to simulate the FSE of aluminum wires.

COMPUTATIONAL PARTICLE MECHANICS (2022)

Add to Collection

Article Engineering, Manufacturing

Effect of various post-extrusion tempering on performance of AA2024 tubes fabricated by shear assisted processing and extrusion

Md Reza-E-Rabby et al.

Summary: Aluminum alloy 2024 tubes have been successfully extruded using the shear assisted processing and extrusion (ShAPE) method, achieving higher extrusion speed and improved mechanical properties.

CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY (2022)

Add to Collection

Article Mathematics, Interdisciplinary Applications

Application of hourglass control to Eulerian smoothed particle hydrodynamics

Shoya Mohseni-Mofidi et al.

Summary: Smoothed particle hydrodynamics (SPH) is a promising method for handling large deformations in solid mechanics problems, but it faces instabilities such as tensile instability and zero-energy modes. This study aims to stabilize Eulerian SPH to accurately deal with large deformations and handle contact problems and fluid-structure interaction effectively. The proposed stabilization method proves to be easy to implement and shows good agreement with analytical solutions and finite element results in various simulation cases.

COMPUTATIONAL PARTICLE MECHANICS (2021)

Add to Collection

Article Engineering, Manufacturing

Shear assisted processing and extrusion of enhanced strength aluminum

Brandon Scott Taysom et al.

Summary: The Shear Assisted Processing and Extrusion (ShAPE) technology was successfully applied to extrude tubes of aluminum alloy 6063, achieving the goals of increased extrusion speed, reduced energy consumption, and improved properties. Through T5 heat treatment of the extruded tubes, the ultimate tensile strength and elongation at break were significantly improved, with potential wide applications for a range of alloys.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Comparative study on welding energy and Interface characteristics of titanium - aluminum explosive composites with and without interlayer

Xiaoming Wu et al.

Summary: This study conducted a comparative study of TA2/5083 and TA2/1060/5083 using energy calculation, SPH numerical simulation, and experiment, showing that the use of 1060 interlayer improved energy utilization efficiency, altered interface morphology, and reduced interface welding energy.

MATERIALS & DESIGN (2021)

Add to Collection

Article Materials Science, Multidisciplinary

A meshfree computational framework for the numerical simulation of the solid -state additive manufacturing process, additive friction stir-deposition (AFS- D)

G. G. Stubblefield et al.

Summary: In this work, a fully coupled thermo-mechanical meshfree approach is developed for simulating the solid-state layer-by-layer additive manufacturing process AFS-D. The method uses a Lagrangian reference frame and solid mechanics formulation to resolve elastic and plastic strains. The simulation results are compared against experimental results for calibration, revealing temperature and strain rate gradients in the AFS-D process.

MATERIALS & DESIGN (2021)

Add to Collection

Article Engineering, Mechanical

Analysis of contact conditions and its influence on strain rate and temperature in friction stir welding

D. G. Andrade et al.

Summary: In this study, a coupled 3D thermo-mechanical numerical model was used to simulate the FSW process and analyze the evolution of contact conditions, strain rates, and temperatures. It was found that temperature and sticking fraction evolve in a similar way with processing parameters, while strain rate is mainly determined by tool rotation speed.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Universal process diagrams for laser sintering of polymers

Claas Bierwisch et al.

Summary: This study theoretically analyzes and numerically simulates the laser irradiation step and thermo-viscous flow during selective laser sintering process on polymeric materials using the smoothed particle hydrodynamics method. It introduces the concept of attenuation melt ratio (AMR) and constructs normalized process diagrams to optimize mechanical properties of materials. The predictive quality of these process windows is confirmed through assessment of mechanical properties of laser-sintered parts made of different polymers.

MATERIALS & DESIGN (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Experimental, numerical and analytical investigation of the polyamide 12 powder bed fusion with the aim of building dimensionless characteristic numbers

Moritz Gruenewald et al.

Summary: This study investigates the impact of material properties on product quality in powder bed fusion through experiments and numerical simulations, proposing a method to calculate dimensionless energy input. The results show good correlation between experimental data and numerical simulation results.

MATERIALS & DESIGN (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Tool-workpiece stick-slip conditions and their effects on torque and heat generation rate in the friction stir welding

Xue Wang et al.

Summary: Friction stir welding is widely used in automotive and aerospace industries for its solid-state bonding and versatility. However, the lack of mechanistic understanding of tool-workpiece frictional behavior hinders the study of the relationship among processing parameters, material properties, and bonding extent.

ACTA MATERIALIA (2021)

Add to Collection

Article Engineering, Manufacturing

High speed manufacturing of aluminum alloy 7075 tubing by Shear Assisted Processing and Extrusion (ShAPE)

Scott Whalen et al.

Summary: Shear assisted processing and extrusion (ShAPE) enables high-speed extrusion of aluminum alloy 7075, resulting in improved strength values and elongation compared to traditional extrusion. Low temperature extrusion at 341 degrees C provides superior material properties in the T6 condition due to variances in nanoscale second phase size and distribution when compared to high temperature extrusion at 441 degrees C.

JOURNAL OF MANUFACTURING PROCESSES (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Influence of impact-induced reaction characteristics of reactive composites on hypervelocity impact resistance

Siyuan Ren et al.

MATERIALS & DESIGN (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Detonation process analysis and interface morphology distribution of double vertical explosive welding by SPH 2D/3D numerical simulation and experiment

Zerui Sun et al.

MATERIALS & DESIGN (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Magnesium alloy ZK60 tubing made by Shear Assisted Processing and Extrusion (ShAPE)

S. Whalen et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Towards better understanding of explosive welding by combination of numerical simulation and experimental study

I. A. Bataev et al.

MATERIALS & DESIGN (2019)

Add to Collection

Article Materials Science, Coatings & Films

A Smoothed Particle Hydrodynamics (SPH) procedure for simulating cold spray process - A study using particles

Balachander Gnanasekaran et al.

SURFACE & COATINGS TECHNOLOGY (2019)

Add to Collection

Article Engineering, Manufacturing

Effects of pin thread on the in-process material flow behavior during friction stir welding: A computational fluid dynamics study

Gaoqiang Chen et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2018)

Add to Collection

Article Engineering, Industrial

Numerical simulation of friction extrusion process

H. Zhang et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)

Add to Collection

Article Engineering, Manufacturing

Linking process and structure in the friction stir scribe joining of dissimilar materials: A computational approach with experimental support

Varun Gupta et al.

JOURNAL OF MANUFACTURING PROCESSES (2018)

Add to Collection

Article Engineering, Industrial

A numerical model for Wire integrity prediction in Friction Stir Extrusion of magnesium alloys

Dario Baffari et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Homogenization and texture development in rapidly solidified AZ91E consolidated by Shear Assisted Processing and Extrusion (ShAPE)

N. R. Overman et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)

Add to Collection

Article Engineering, Manufacturing

Experimental Analysis and Microstructure Modeling of Friction Stir Extrusion of Magnesium Chips

Reza Abdi Behnagh et al.

JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2016)

Add to Collection

Article Engineering, Manufacturing

A study on the variation of forces and temperature in a friction stir welding process: A finite element approach

Rahul Jain et al.

JOURNAL OF MANUFACTURING PROCESSES (2016)

Add to Collection

Review Materials Science, Multidisciplinary

A review of dynamic recrystallization phenomena in metallic materials

K. Huang et al.

MATERIALS & DESIGN (2016)

Add to Collection

Article Engineering, Multidisciplinary

An hourglass control algorithm for Lagrangian Smooth Particle Hydrodynamics

Georg C. Ganzenmueller

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2015)

Add to Collection

Article Engineering, Manufacturing

Material flow visualization in Friction Stir Welding via particle tracing

N. Dialami et al.

INTERNATIONAL JOURNAL OF MATERIAL FORMING (2015)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Comparison of a Fluid and a Solid Approach for the Numerical Simulation of Friction Stir Welding with a Non-Cylindrical Pin

Philippe Bussetta et al.

STEEL RESEARCH INTERNATIONAL (2014)

Add to Collection

Article Engineering, Multidisciplinary

Numerical modeling of friction stir welding processes

M. Chiumenti et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2013)

Add to Collection

Article Computer Science, Interdisciplinary Applications

An apropos kinematic framework for the numerical modeling of friction stir welding

Narges Dialami et al.

COMPUTERS & STRUCTURES (2013)

Add to Collection

Article Engineering, Mechanical

A new smoothed particle hydrodynamics non-Newtonian model for friction stir welding: Process modeling and simulation of microstructure evolution in a magnesium alloy

Wenxiao Pan et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2013)

Add to Collection

Article Engineering, Manufacturing

Friction model for friction stir welding process simulation: Calibrations from welding experiments

Mohamed Assidi et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2010)

Add to Collection

Review Geochemistry & Geophysics

MODELING AND SIMULATION OF PORE-SCALE MULTIPHASE FLUID FLOW AND REACTIVE TRANSPORT IN FRACTURED AND POROUS MEDIA

Paul Meakin et al.

REVIEWS OF GEOPHYSICS (2009)

Add to Collection

Review Materials Science, Multidisciplinary

Recent advances in friction-stir welding - Process, weldment structure and properties

R. Nandan et al.

PROGRESS IN MATERIALS SCIENCE (2008)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Numerical simulation of fluid-structure interaction by SPH

Carla Antoci et al.

COMPUTERS & STRUCTURES (2007)

Add to Collection

Article Nanoscience & Nanotechnology

A continuum based FEM model for friction stir welding - model development

G Buffa et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)

Add to Collection

Article Engineering, Industrial

3-Dimensional CFD modelling of flow round a threaded friction stir welding tool profile

PA Colegrove et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2005)

Add to Collection

Article Materials Science, Multidisciplinary

A local model for the thermomechanical conditions in friction stir welding

H Schmidt et al.

MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2005)

Add to Collection

Article Engineering, Multidisciplinary

Stable particle methods based on Lagrangian kernels

T Rabczuk et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2004)

Add to Collection

Article Materials Science, Multidisciplinary

An analytical model for the heat generation in friction stir welding

H Schmidt et al.

MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2004)

Add to Collection

Article Materials Science, Multidisciplinary

Two-dimensional friction stir welding process model based on fluid mechanics

TU Seidel et al.

SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2003)

Add to Collection

Article Engineering, Manufacturing

Three-dimensional modeling of the friction stir-welding process

P Ulysse

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2002)

Add to Collection

© Peeref 2019-2024. All rights reserved.