4.7 Article

The effect of short-range order on mechanical properties of high entropy alloy Al0.3CoCrFeNi

Related references

Note: Only part of the references are listed.
Article Chemistry, Physical

Molecular simulation of microstructure evolution and plastic deformation of nanocrystalline CoCrFeMnNi high-entropy alloy under tension and compression

Yuming Qi et al.

Summary: High-entropy alloys composed of five or more elements have excellent mechanical properties and may undergo phase transformation during plastic deformation. Compressive loading leads to grain refinement and the formation of parallel twins, significantly improving material strength.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Article Materials Science, Multidisciplinary

Short-range ordering and its effects on mechanical properties of high-entropy alloys

Yuan Wu et al.

Summary: This letter summarizes the formation and characterization of short-range orderings (SROs) and their effects on the deformation behavior of high-entropy alloys (HEAs). It shows that tuning the degree of SROs is an effective way for optimizing the mechanical properties of HEAs. The challenges and future research activities regarding the formation mechanism and characterization of SROs in HEAs are also discussed.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

Article Nanoscience & Nanotechnology

The effect of local atomic configuration in high-entropy alloys on the dislocation behaviors and mechanical properties

Yu-Chia Yang et al.

Summary: High-entropy alloys (HEAs) are promising advanced structural materials due to their comprehensive properties. Local atomic configuration (LAC) in HEAs significantly influences dislocation motion, lattice friction, and critical shear stress, with introducing large-size atoms enhancing dislocation dynamics for strengthening and toughening.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

Article Multidisciplinary Sciences

Direct observation of chemical short-range order in a medium-entropy alloy

Xuefei Chen et al.

Summary: The study provides direct experimental evidence of chemical short-range atomic-scale ordering (CSRO) in a VCoNi medium-entropy alloy through diffraction and electron microscopy analysis. The research demonstrates that using specific crystallographic directions can reveal CSRO in face-centred-cubic VCoNi concentrated solution, offering insights into atomic packing configuration and dislocation interactions enhanced by CSROs.

NATURE (2021)

Article Nanoscience & Nanotechnology

Twinning Engineering of a CoCrFeMnNi High-Entropy Alloy

Jongun Moon et al.

Summary: Deformation-induced twinning was used as a strengthening mechanism in a thermomechanical treatment for a high-entropy alloy, resulting in improved mechanical properties, especially in strain hardening ability, at room temperature.

SCRIPTA MATERIALIA (2021)

Article Materials Science, Multidisciplinary

On the Real-Time Atomistic Deformation of the CoNiCrFeMn High-Entropy Alloy with Gradient Structures

Roghayeh Mohammadzadeh et al.

Summary: Molecular dynamic simulations were used to investigate the relationship between gradient structure and mechanical properties in a CoNiCrFeMn high-entropy alloy. The study found that the high strength and work hardening of the gradient HEA are due to concentrated dislocation bundles in grain interiors. The results also showed that the energy barrier for nucleation of deformation faults in the deformed layer of the gradient HEA is higher compared to the ungradient sample.

PHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE (2021)

Article Nanoscience & Nanotechnology

Martensitic transformation induced dislocation walls in Fe42Mn38Co10Cr10 high-entropy alloy

L. Qi et al.

Summary: This study characterized two types of previously unreported dislocation walls in a high-entropy alloy, showing the importance of these structures in strain hardening and plastic accommodation. The walls are constituted by specific types of partial dislocations and play a significant role in dislocation-interface interactions.

SCRIPTA MATERIALIA (2021)

Article Multidisciplinary Sciences

Stacking fault energy in concentrated alloys

Mulaine Shih et al.

Summary: This study revisits the meaning of stacking fault energy (SFE) and the assumptions of equilibrium dissociation of lattice dislocations in concentrated alloys, showing that SFE in pure metals is a unique value, but in alloys it has a distribution of values depending on the local atomic environment. By using atomistic simulations in a model NiCo alloy, researchers found that even the upper bound of SFE distribution alone cannot satisfy the force balance in some cases, indicating the key importance of the dislocation/solute interaction for the accurate assessment of SFE in alloys beyond dilute limit.

NATURE COMMUNICATIONS (2021)

Article Materials Science, Multidisciplinary

Deformation Behaviors of Flat Rolled Wire in Twinning-Induced Plasticity Steel

Joong-Ki Hwang

METALS AND MATERIALS INTERNATIONAL (2020)

Article Nanoscience & Nanotechnology

Core effect of local atomic configuration and design principles in AlxCoCrFeNi high-entropy alloys

Yu-Chia Yang et al.

SCRIPTA MATERIALIA (2020)

Article Materials Science, Multidisciplinary

Chemical short range order strengthening in a model FCC high entropy alloy

E. Antillon et al.

ACTA MATERIALIA (2020)

Article Engineering, Mechanical

Study of the plastic deformation mechanism of TRIP-TWIP high entropy alloys at the atomic level

Mehran Bahramyan et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2020)

Article Multidisciplinary Sciences

Short-range order and its impact on the CrCoNi medium-entropy alloy

Ruopeng Zhang et al.

NATURE (2020)

Article Materials Science, Multidisciplinary

Inverse Hall-Petch relationship of high-entropy alloy by atomistic simulation

Liang Zhang et al.

MATERIALS LETTERS (2020)

Article Nanoscience & Nanotechnology

Dynamic recrystallization behaviour of AlxCoCrFeNi high entropy alloys during high-temperature plane strain compression

Murugesan Annasamy et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

Article Nanoscience & Nanotechnology

Tensile yield strength of a single bulk Al0.3CoCrFeNi high entropy alloy can be tuned from 160 MPa to 1800 MPa

Bharat Gwalani et al.

SCRIPTA MATERIALIA (2019)

Article Nanoscience & Nanotechnology

Superior tensile properties of Al0.3CoCrFeNi high entropy alloys with B2 precipitated phases at room and cryogenic temperatures

Q. Li et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

Article Materials Science, Multidisciplinary

The effect of randomness on the strength of high-entropy alloys

Luchan Zhang et al.

ACTA MATERIALIA (2019)

Article Materials Science, Multidisciplinary

Twinning-induced plasticity (TWIP) steels

Bruno C. De Cooman et al.

ACTA MATERIALIA (2018)

Article Nanoscience & Nanotechnology

Microstructures with extraordinary dynamic work hardening and strain rate sensitivity in Al0.3CoCrFeNi high entropy alloy

Sindhura Gangireddy et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

Article Chemistry, Physical

Dislocation dynamics in Al0.1CoCrFeNi high-entropy alloy under tensile loading

Aayush Sharma et al.

INTERMETALLICS (2017)

Article Materials Science, Multidisciplinary

Formation of ultrafine-grained microstructure in Al0.3CoCrFeNi high entropy alloys with grain boundary precipitates

Hiroyuki Y. Yasuda et al.

MATERIALS LETTERS (2017)

Article Nanoscience & Nanotechnology

Tensile properties of AlCrCoFeCuNi glassy alloys: A molecular dynamics simulation study

Y. Afkham et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)

Article Materials Science, Multidisciplinary

Investigating dislocation motion through a field of solutes with atomistic simulations and reaction rate theory

S. Saroukhani et al.

ACTA MATERIALIA (2017)

Article Materials Science, Multidisciplinary

Understanding phase stability of Al-Co-Cr-Fe-Ni high entropy alloys

Chuan Zhang et al.

MATERIALS & DESIGN (2016)

Article Chemistry, Physical

Phases, microstructure and mechanical properties of AlxCoCrFeNi high-entropy alloys at elevated temperatures

Woei-Ren Wang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2014)

Review Physics, Multidisciplinary

Physical Properties of High Entropy Alloys

Ming-Hung Tsai

ENTROPY (2013)

Article Chemistry, Physical

Intrinsic surface hardening and precipitation kinetics of Al0.3CrFe1.5MnNi0.5 multi-component alloy

Ming-Hao Chuang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2013)

Article Materials Science, Multidisciplinary

Effect of stacking fault energy on mechanical behavior of bulk nanocrystalline Cu and Cu alloys

Khaled Youssef et al.

ACTA MATERIALIA (2011)

Article Materials Science, Multidisciplinary

Microstructure and wear behavior of AlxCo1.5CrFeNi1.5Tiy high-entropy alloys

Ming-Hao Chuang et al.

ACTA MATERIALIA (2011)

Article Materials Science, Multidisciplinary

Electrochemical passive properties of AlxCoCrFeNi (x=0, 0.25, 0.50, 1.00) alloys in sulfuric acids

Yih-Farn Kao et al.

CORROSION SCIENCE (2010)

Article Materials Science, Multidisciplinary

Pitting corrosion of the high-entropy alloy Co1.5CrFeNi1.5Ti0.5Mo0.1 in chloride-containing sulphate solutions

Y. L. Chou et al.

CORROSION SCIENCE (2010)

Article Nanoscience & Nanotechnology

Microstructure and compressive properties of AlCrFeCoNi high entropy alloy

Y. P. Wang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)