Journal
MATERIALS & DESIGN
Volume 221, Issue -, Pages -Publisher
ELSEVIER SCI LTD
DOI: 10.1016/j.matdes.2022.110968
Keywords
Microchannel heat sink; Laser processing; Flow boiling heat transfer; Laser machining
Categories
Funding
- Samsung Research Funding & Incubation Center of Samsung Electronics [SRFC-TA1903-06]
- Ministry of Trade, Industry & Energy (MOTIE) of the Republic of Korea [20214000000280]
- Korea Institute of Energy Technology Evaluation and Planning (KETEP)
Ask authors/readers for more resources
In this study, an all-laser fabrication method is proposed to fabricate a microfluidic heat sink for silicon devices. The microchannels are engraved on a silicon wafer using lasers, and inlet/outlet holes are drilled on a quartz glass cover. The heat generated by the device is successfully removed by the fabricated microfluidic channel.
Microchannel heat sinks have been recognized as efficient cooling platforms for thermal management of miniaturized devices because of their compact structure. Unlike most microfabrication processes, laser micromachining is a versatile direct writing method to rapidly produce microchannels in brittle substrates such as silicon wafers. In this study, an all-laser fabrication method is proposed to fabricate a microfluidic heat sink for silicon devices. Lasers are used for engraving microchannels on a silicon wafer, drilling inlet/outlet holes in quartz glass cover, and welding the Si sample and quartz glass cover. The entire fabrication process is completed within two hours. The microchannel surface is converted into a hydrophilic wall as proven by contact angle measurement, and a water flow is easily introduced to the channel as a cooling fluid. The boiling heat transfer performance of the fabricated microfluidic channel is evaluated by applying heat to the bottom of the device. A micro-heater placed underneath the Si substrate is also prepared using a laser to induce selective sintering of a conductive Ag layer. The heat generated by the heater is successfully removed by boiling heat transfer, and the critical heat flux is measured to be ti 55.2 W/cm2 at a water flux of 208 kg/m2s.(c) 2022 The Authors. Published by Elsevier Ltd. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).
Authors
I am an author on this paper
Click your name to claim this paper and add it to your profile.
Reviews
Recommended
No Data Available