4.7 Article

Crystal plasticity modeling of low-cycle fatigue behavior of an Mg-3Al-1Zn alloy based on a model, including twinning and detwinning mechanisms

Related references

Note: Only part of the references are listed.
Article Engineering, Mechanical

Crystal plasticity modeling of the multiaxial ratchetting of extruded AZ31 Mg alloy

Hang Li et al.

Summary: The non-proportional multiaxial ratchetting behavior of extruded AZ31 Mg alloy was investigated through macroscopic experimental observations and corresponding microscopic investigations. A constitutive model was developed to capture the plastic deformation mechanisms and the evolution of back stresses during the ratchetting process. The developed model successfully reproduced the non-proportional multiaxial ratchetting behavior of the AZ31 Mg alloy.

INTERNATIONAL JOURNAL OF PLASTICITY (2022)

Article Nanoscience & Nanotechnology

Onset of detwinning in Mg-3Al-1Zn alloy: A synchrotron-based X-ray diffraction study

N. B. Zhang et al.

Summary: This study investigates the onset of detwinning in magnesium alloy Mg-3Al-1Zn under continuous loading using real-time in situ synchrotron X-ray diffraction. The results reveal that detwinning of the {10 (1) over bar2} extension twins occurs immediately upon unloading, regardless of whether the twins are activated by tension parallel to or compression perpendicular to the c-axis fibers.

SCRIPTA MATERIALIA (2021)

Review Materials Science, Multidisciplinary

Review on cyclic plasticity of magnesium alloys: Experiments and constitutive models

Guo-zheng Kang et al.

Summary: This work reviews the progress in the cyclic plasticity of Mg alloys by summarizing existing experimental results and reviewing corresponding constitutive models. Conclusions and recommended topics are provided to boost the further development and application of Mg alloys.

INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2021)

Article Engineering, Mechanical

Experimental and numerical analysis of cyclic deformation and fatigue behavior of a Mg-RE alloy

Meijuan Zhang et al.

Summary: Strain-controlled fatigue behavior of Mg?1Mn-0.5Nd alloy was studied, showing a correlation between the microstructure and twinning. Computational homogenization was used to simulate the mechanical response of the alloy, revealing the dominant deformation mechanisms.

INTERNATIONAL JOURNAL OF PLASTICITY (2021)

Article Nanoscience & Nanotechnology

Monotonic and cyclic anisotropies of an extruded Mg-Al-Ca-Mn alloy plate: Experiments and crystal plasticity studies

Fabien Briffod et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

Article Engineering, Mechanical

Twinning-detwinning behavior of E-form Mg alloy sheets during in-plane reverse loading

Jaiveer Singh et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2020)

Article Engineering, Mechanical

Multiscale modeling of twinning and detwinning behavior of HCP polycrystals

Mohammadreza Yaghoobi et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2020)

Article Materials Science, Multidisciplinary

An experimental study of anisotropic fatigue behavior of rolled AZ31B magnesium alloy

Yuqian Wang et al.

MATERIALS & DESIGN (2020)

Article Engineering, Mechanical

Fatigue characteristics and modeling of cast and cast-forged ZK60 magnesium alloy

S. M. H. Karparvarfard et al.

INTERNATIONAL JOURNAL OF FATIGUE (2019)

Article Nanoscience & Nanotechnology

Numerical investigation of the influence of twinning/detwinning on fatigue crack initiation in AZ31 magnesium alloy

Fabien Briffod et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

Article Engineering, Mechanical

Twinning and detwinning behaviors of commercially pure titanium sheets

Chao Ma et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2019)

Article Engineering, Mechanical

Quantification of cyclic twinning-detwinning behavior during low-cycle fatigue of pure magnesium using high energy X-ray diffraction

Aeriel D. Murphy-Leonard et al.

INTERNATIONAL JOURNAL OF FATIGUE (2019)

Article Materials Science, Multidisciplinary

Strain-Path Dependence of {10(1)over-bar2} Twinning in a Rolled Mg-3Al-1Zn Alloy: Influence of Twinning Model

Lingyu Zhao et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2019)

Article Materials Science, Multidisciplinary

Constitutive Modeling of Slip, Twinning and Detwinning for Mg Alloy and Inhomogeneous Evolution of Microstructure

Yuan Chen et al.

ACTA MECHANICA SOLIDA SINICA (2018)

Article Engineering, Mechanical

Characteristic cyclic plastic deformation in ZK60 magnesium alloy

Shuai Dong et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2017)

Article Chemistry, Physical

Modeling of {10-12}-{10-12} secondary twinning in pre-compressed Mg alloy AZ31

H. Qiao et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2017)

Article Nanoscience & Nanotechnology

Cyclic deformation behaviors of AZ31B magnesium alloy in two different asymmetric loading manners

L. H. Song et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)

Article Nanoscience & Nanotechnology

Twin-induced hardening in extruded Mg alloy AM30

Hua Qiao et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)

Article Nanoscience & Nanotechnology

Modeling the deformation behavior of a rolled Mg alloy with the EVPSC-TDT model

Chao Ma et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)

Article Materials Science, Multidisciplinary

The mechanism for the high dependence of the Hall-Petch slope for twinning/slip on texture in Mg alloys

Huihui Yu et al.

ACTA MATERIALIA (2017)

Article Engineering, Mechanical

Influence of loading direction on the anisotropic fatigue properties of rolled magnesium alloy

Sung Hyuk Park et al.

INTERNATIONAL JOURNAL OF FATIGUE (2016)

Article Nanoscience & Nanotechnology

A new empirical equation for termination of twinning in magnesium alloys

H. Qiao et al.

SCRIPTA MATERIALIA (2016)

Article Materials Science, Multidisciplinary

Unraveling cyclic deformation mechanisms of a rolled magnesium alloy using in situ neutron diffraction

Wei Wu et al.

ACTA MATERIALIA (2015)

Article Materials Science, Multidisciplinary

Modelling the role of slips and twins in magnesium alloys under cyclic shear

H. Wang et al.

COMPUTATIONAL MATERIALS SCIENCE (2015)

Article Engineering, Mechanical

Microstructure-sensitive investigation of magnesium alloy fatigue

K. Hazeli et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2015)

Article Engineering, Mechanical

Modeling twinning and detwinning behavior of Mg alloy ZK60A during monotonic and cyclic loading

H. Qiao et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2015)

Article Mechanics

On twinning and anisotropy in rolled Mg alloy AZ31 under uniaxial compression

X. Q. Guo et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2015)

Article Mechanics

Evaluation of elastic-viscoplastic self-consistent polycrystal plasticity models for zirconium alloys

H. Qiao et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2015)

Article Materials Science, Multidisciplinary

Strain-controlled low cycle fatigue properties of a rare-earth containing ZEK100 magnesium alloy

F. Mokdad et al.

MATERIALS & DESIGN (2015)

Article Materials Science, Multidisciplinary

Numerical Assessment of the Role of Slip and Twinning in Magnesium Alloy AZ31B During Loading Path Reversal

Huamiao Wang et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2015)

Article Materials Science, Multidisciplinary

Twinning effects in a polycrystalline magnesium alloy under cyclic deformation

C. F. Gu et al.

ACTA MATERIALIA (2014)

Article Materials Science, Multidisciplinary

Crystal plasticity based constitutive model for uniaxial ratchetting of polycrystalline magnesium alloy

Chao Yu et al.

COMPUTATIONAL MATERIALS SCIENCE (2014)

Article Engineering, Mechanical

Investigation of deformation dynamics in a wrought magnesium alloy

Wei Wu et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2014)

Article Nanoscience & Nanotechnology

The cyclic frequency sensitivity of low cycle fatigue (LCF) behavior of the AZ31B magnesium alloy

G. S. Duan et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)

Article Engineering, Mechanical

A crystal plasticity model for hexagonal close packed (HCP) crystals including twinning and de-twinning mechanisms

H. Wang et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2013)

Article Nanoscience & Nanotechnology

Low cycle fatigue behavior of the textured AZ31B magnesium alloy under the asymmetrical loading

C. J. Geng et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)

Article Engineering, Mechanical

An experimental study on cyclic deformation and fatigue of extruded ZK60 magnesium alloy

Qin Yu et al.

INTERNATIONAL JOURNAL OF FATIGUE (2012)

Article Nanoscience & Nanotechnology

Work-hardening behaviors of magnesium alloy sheet during in-plane cyclic loading

Takayuki Hama et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)

Article Nanoscience & Nanotechnology

Study on cyclic deformation behavior of extruded Mg-3Al-1Zn alloy

Cheng Chen et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)

Article Nanoscience & Nanotechnology

A constitutive model of twinning and detwinning for hexagonal close packed polycrystals

H. Wang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)

Article Nanoscience & Nanotechnology

Polycrystal modeling of tensile twinning in a Mg alloy during cyclic loading

C. F. Gu et al.

SCRIPTA MATERIALIA (2012)

Article Engineering, Mechanical

Fatigue properties of rolled magnesium alloy (AZ31) sheet: Influence of specimen orientation

F. Lv et al.

INTERNATIONAL JOURNAL OF FATIGUE (2011)

Article Engineering, Mechanical

Cyclic behavior of extruded magnesium: Experimental, microstructural and numerical approach

C. Guillemer et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2011)

Article Engineering, Mechanical

An experimental study of cyclic deformation of extruded AZ61A magnesium alloy

Jixi Zhang et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2011)

Article Materials Science, Multidisciplinary

Low Cycle Fatigue Properties and an Energy-Based Approach for as-Extruded AZ31 Magnesium Alloy

S. H. Kwon et al.

METALS AND MATERIALS INTERNATIONAL (2011)

Article Materials Science, Multidisciplinary

Deformation twinning in AZ31: Influence on strain hardening and texture evolution

Marko Knezevic et al.

ACTA MATERIALIA (2010)

Article Mechanics

Evaluation of self-consistent polycrystal plasticity models for magnesium alloy AZ31B sheet

H. Wang et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2010)

Article Materials Science, Multidisciplinary

Enhancing the fatigue property of rolled AZ31 magnesium alloy by controlling {10-12} twinning-detwinning characteristics

Seong-Gu Hong et al.

JOURNAL OF MATERIALS RESEARCH (2010)

Article Materials Science, Multidisciplinary

A finite strain elastic-viscoplastic self-consistent model for polycrystalline materials

H. Wang et al.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2010)

Article Nanoscience & Nanotechnology

Effect of anisotropy on the low-cycle fatigue behavior of rolled AZ31 magnesium alloy

Sung Hyuk Park et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)

Article Nanoscience & Nanotechnology

The effects of texture and extension twinning on the low-cycle fatigue behavior of a rolled magnesium alloy, AZ31B

L. Wu et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)

Article Nanoscience & Nanotechnology

Roles of deformation twinning and dislocation slip in the fatigue failure mechanism of AZ31 Mg alloys

J. Koike et al.

SCRIPTA MATERIALIA (2010)

Article Nanoscience & Nanotechnology

Role of twinning and slip in cyclic deformation of extruded Mg-3%Al-1%Zn alloys

Yan Jun Wu et al.

SCRIPTA MATERIALIA (2010)

Article Engineering, Mechanical

Low cycle fatigue properties of an extruded AZ31 magnesium alloy

S. Begum et al.

INTERNATIONAL JOURNAL OF FATIGUE (2009)

Article Nanoscience & Nanotechnology

Analysis of fatigue damage process in magnesium alloy AZ31

M. Matsuzuki et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)

Article Nanoscience & Nanotechnology

The role of twinning-detwinning on fatigue fracture morphology of Mg-3%Al-1%Zn alloy

S. M. Yin et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)

Article Nanoscience & Nanotechnology

Cyclic deformation behavior of as-extruded Mg-3%Al-1%Zn

S. M. Yin et al.

SCRIPTA MATERIALIA (2008)

Article Automation & Control Systems

Magnesium and its alloys applications in automotive industry

Mustafa Kemal Kulekci

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2008)

Article Physics, Condensed Matter

VULCAN - The engineering diffractometer at the SNS

X-L. Wang et al.

PHYSICA B-CONDENSED MATTER (2006)

Article Materials Science, Multidisciplinary

Enhanced deformation mechanisms by anisotropic plasticity in polycrystalline Mg alloys at room temperature

J Koike

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2005)

Article Materials Science, Multidisciplinary

Influence of grain size on the compressive deformation of wrought Mg-3Al-1Zn

MR Barnett et al.

ACTA MATERIALIA (2004)

Article Materials Science, Multidisciplinary

Pseudoelastic behaviour of cast magnesium AZ91 alloy under cyclic loading-unloading

CH Cáceres et al.

ACTA MATERIALIA (2003)

Article Nanoscience & Nanotechnology

Study of slip mechanisms in a magnesium alloy by neutron diffraction and modeling

SR Agnew et al.

SCRIPTA MATERIALIA (2003)